Skip to content
TapBuff

Cdcr - Sierra Conservation Center

EPA’s and California’s records have results for 7 contaminants in its water; 3 were found.

Serves 3,571 people · Surface water · Jamestown, CA · Hardness: soft

Serves
3,571 people
Connections
578
Water source
Surface water
Based in
Jamestown, CA
County
Tuolumne
Owner
State government
Hardness
Soft
The ZIP code it serves

95327

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 4 health-based violations since 2016, all resolved in EPA’s file.

The 4 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

Haloacetic acids (HAA5), total trihalomethanes (TTHM), chromium (total), arsenic, fluoride and nitrate: California’s own results, samples taken from March 4, 2020 to April 1, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 43.4 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 43.4 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 92 ppb. That was also the latest year on file. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 51.2 ppb, in 2018, and EPA recorded violations in 2018 and 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 40.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 32.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 40.8 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 71 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 64.3 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest yearly average 1.4 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 1.4 ppb, in 2023, below EPA’s legal limit of 100 ppb. In 2025, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Fluoride
  • Lead
  • Nitrate

Violations since 2016

4 health-based violations since 2016, all for total Haloacetic Acids (HAA5). The latest began Jan. 1, 2019.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2019 to March 31, 2019, 67 ppbResolved
Oct. 1, 2018 to Dec. 31, 2018, 62 ppbResolved
July 1, 2018 to Sept. 30, 2018, 66 ppbResolved
April 1, 2018 to June 30, 2018, 62 ppbResolved

Health-based violations only.

Hardness

Soft, 23 mg/L (1.4 grains per gallon), at its one sampling point, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), chromium (total), arsenic, fluoride and nitrate results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Cdcr - Sierra Conservation Center’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from March 4, 2020 to April 1, 2026.

Testing your own tap

Cdcr - Sierra Conservation Center’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Cdcr - Sierra Conservation Center’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs California certifies closest to the area Cdcr - Sierra Conservation Center serves, or a kit by mail

The 3 labs California certifies closest to the area Cdcr - Sierra Conservation Center serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Precision Enviro-Tech

    Twain Harte, CA · about 18 miles

    Certified for bacteria

    (209) 477-8105

  • Aemtek, Inc.

    Modesto, CA · about 30 miles

    Certified for bacteria

    (510) 979-1979

  • Microbac Laboratories, Inc. - Turlock

    Turlock, CA · about 33 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (707) 822-4649

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA5510851. Rebuilt from EPA data on Oct. 25, 2026.