Skip to content
TapBuff

Big Bear City CSD

EPA’s and California’s records have results for 38 contaminants in its water; 14 were found.

Serves 12,738 people · Groundwater · Big Bear City, CA · Hardness: varies by source

Serves
12,738 people
Connections
6,238
Water source
Groundwater
Based in
Big Bear City, CA
County
San Bernardino
Owner
Local government
Hardness
Varies by source
The 2 ZIP codes it serves

92314, 92386

The short answer

None of the results here is above a limit in force today. PFHxS and PFOS are above EPA’s new limit, which takes effect in 2029. PFOA had a sample above it, but not on average, the way EPA will judge it. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 6 to Dec. 17, 2024.

Fluoride, nitrate, uranium, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5) and chromium (total): California’s own results, samples taken from Jan. 2, 2020 to July 15, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFHxS, PFOS, PFOA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFPeA at 12 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFHxS

Comes from the source

Above EPA’s new limit (2029)

36 ppt

Highest sample, March 6, 2024; found in 4 of 12

The highest sample was 36 ppt, about 3.6 times EPA’s new limit of 10 ppt, which takes effect in 2029. EPA’s health goal is 10 ppt.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 27.5 ppt, also above it.

What handles it

PFOS

Comes from the source

Above EPA’s new limit (2029)

9.9 ppt

Highest sample, Sept. 17, 2024; found in 3 of 12

The highest sample was 9.9 ppt, about 2.5 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 7.2 ppt, also above it.

What handles it

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOA

Comes from the source

A sample above EPA’s 2029 limit

4.5 ppt

Highest sample, March 6, 2024; found in 1 of 12

The highest sample was 4.5 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.3 ppt, below it.

What handles it

Below EPA’s limits, 7 results

Uranium and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Fluoride, Legal limit 4.0 ppm; highest yearly average 2.1 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 1.8 ppm · Forms or is added in treatment

Averaged by year, the highest was 2.1 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 11 ppm. In 2026, the latest year on file, its 286 samples averaged below the limit. EPA recorded no violation for fluoride at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.7 ppm, in 2019.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 4.3 ppm

Highest sample; found in 69 of 137 · 2026 average: 1.1 ppm · Comes from the source

The highest sample, in 2024, was 4.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 24 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.3 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 10.3 ppb

Highest yearly average, 2020 to 2026 · Comes from the source

Averaged by year, the highest was 10.3 ppb, in 2026, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 13.6 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.4 ppb, in 2012.

What handles it

About uranium
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 2.5 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 2.5 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 9.8 ppb. In 2026, the latest year on file, it wasn’t found in any of its 15 samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.9 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.16 ppb

Highest yearly average, 2020 to 2026 · Comes from the source

Averaged by year, the highest was 0.16 ppb, in 2026, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.2 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.55 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Forms or is added in treatment

Averaged by year, the highest was 0.55 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 1.1 ppb. In 2025, the latest year on file, it wasn’t found in any of its two samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.13 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
PFBS, Health benchmark 2,000 ppt; highest 9.2 ppt

Highest sample, March 6, 2024; found in 5 of 12 · Comes from the source

The highest sample was 9.2 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit4.5 ppt highest, found in 1 of 12 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)9.9 ppt highest, found in 3 of 12 samples. Details
PFHxS10 pptAbove EPA’s new limit (2029)36 ppt highest, found in 4 of 12 samples. Details
PFNA10 pptNot foundNot found in any of 12 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 12 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits9.2 ppt highest, found in 5 of 12 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Above EPA’s new limit (2029)2.75 at its highest sampling location, Rowe Reservoir
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
California utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA12 ppt3 of 12None covers it
PFHxA11 ppt3 of 12None covers it
PFPeS7.4 ppt2 of 12None covers it
PFHpA3.5 ppt1 of 12NSF/ANSI 53: Total PFAS Reduction
24 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: Total PFAS Reduction, PFOS Reduction, PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFHxS, PFOS, PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Perfluorohexane Sulfonic Acid (PFHxS); Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Uranium, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOS, PFOA, Uranium, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Moderately hard to very hard depending on the source, 73 to 490 mg/L (4.3 to 28.7 grains per gallon), across 16 sampling points, 2020 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Big Bear City CSD reported another disinfectant but neither chlorine nor chloramine, in its 2024 sampling for EPA.

What that means

Most utilities add chlorine or chloramine, CDC says. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Fluoride, nitrate, uranium, total trihalomethanes (TTHM), arsenic, haloacetic acids (HAA5) and chromium (total) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Big Bear City CSD’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 6 to Dec. 17, 2024; California’s results run from Jan. 2, 2020 to July 15, 2026.

Testing your own tap

Big Bear City CSD’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Big Bear City CSD’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Big Bear City CSD’s results flag: PFHxS, PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Big Bear City CSD serves, or a kit by mail

The 3 labs California certifies closest to the area Big Bear City CSD serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • BSK Associates - San Bernardino Analytical Laboratory

    San Bernardino, CA · about 29 miles

    Certified for bacteria

    (559) 497-2888

  • Geo-Monitor, Inc

    Hesperia, CA · about 30 miles

    Certified for bacteria

    (760) 244-3481

  • Clinical Laboratory of San Bernardino, Inc.

    Grand Terrace, CA · about 33 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (909) 825-7693

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA3610008. Rebuilt from EPA data on Oct. 25, 2026.