Skip to content
TapBuff
ZIP

Alpine Acres Mutual Water Co

What EPA’s and California’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
195 people
Connections
55
Water source
Groundwater
Based in
Soulsbyville, CA
County
Tuolumne
Owner
Private
Hardness
Very hard
The ZIP code it serves

95370

The short answer

1 result is above the health goal. The worst: Uranium, above the health goal. 1 health-based violation since 2016.

What handles it

What was found

Uranium, nitrate, fluoride, arsenic, chromium (total) and total trihalomethanes (TTHM): California’s own results, samples taken from March 3, 2020 to Dec. 22, 2025, with EPA’s 2012 to 2019 file for earlier years.

Above the health goal1

Uranium

Comes from the source

Above the health goal

6.3ppb

Highest yearly average, 2020 to 2021

2021, one sample: 1.7 ppb

Averaged by year, the highest was 6.3 ppb, in 2020: below EPA’s legal limit of 30 ppb, but above its health goal of zero. Its highest single sample was 6.4 ppb. In 2021, the latest year on file, its one sample was 1.7 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 3.9 ppb, in 2013.

What handles it

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

2.8ppm

Highest sample; found in 4 of 6

2025 average: 1.8 ppm

The highest sample, in 2025, was 2.8 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its two samples averaged 1.8 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 2.6 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.18ppm

Highest yearly average, 2020 to 2023

2023: not found

Averaged by year, the highest was 0.18 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. In 2023, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.16 ppm, in 2016.

What handles it

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Hardness

Very hard, 205 mg/L (12 grains per gallon), at its one sampling point, 2020 to 2023.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Softeners compared at 12 grains per gallon, salt includedSoftener or salt-free conditioner?California water hardness, utility by utility

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 4 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Uranium, nitrate, fluoride, arsenic, chromium (total) and total trihalomethanes (TTHM) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Alpine Acres Mutual Water Co’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; California’s results run from March 3, 2020 to Dec. 22, 2025.

Testing your own tap

Alpine Acres Mutual Water Co’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

The 3 labs California certifies closest to the area Alpine Acres Mutual Water Co serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Precision Enviro-Tech

    Twain Harte, CA · about 8 miles

    Certified for bacteria

    (209) 477-8105

  • 49er Water Laboratory

    Jackson, CA · about 34 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (530) 277-2770

  • Aemtek, Inc.

    Modesto, CA · about 41 miles

    Certified for bacteria

    (510) 979-1979

All 145 certified labs for California

Sources

PWSID CA5500041. Rebuilt from EPA data on Oct. 18, 2026.

Also in Tuolumne County

All California utilities

What to do next