Skip to content
TapBuff

Alco Water Service

EPA’s and California’s records have results for 38 contaminants in its water; 8 were found.

Serves 56,253 people · Groundwater · Salinas, CA · Hardness: varies by source

Serves
56,253 people
Connections
9,147
Water source
Groundwater
Based in
Salinas, CA
County
Monterey
Owner
Private
Hardness
Varies by source
The 2 ZIP codes it serves

93905, 93906

The short answer

Nitrate averaged above its legal limit’s level in 2026, with no violation recorded. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 7 to Sept. 12, 2023.

Nitrate, arsenic, fluoride, uranium, chromium (total), total trihalomethanes (TTHM) and haloacetic acids (HAA5): California’s own results, samples taken from Jan. 21, 2020 to June 29, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above the limit’s level, no violation recorded, 1 result

Nitrate

Comes from the source

Above the limit’s level, no violation

What it means for you. Infants under six months are the ones at risk: EPA says they could become seriously ill. For an infant’s formula or food, use bottled water or ready-to-feed formula. EPA advises against water with more than 10 ppm, and CDC says boiling can’t make water with harmful chemicals safe.

14.3 ppm

Highest sample; found in 73 of 73

2026 average: 6.7 ppm

From 2020 to 2026, seven samples were above EPA’s legal limit of 10 ppm, the highest 14.3 ppm in 2026. The next sample at the same point, within 30 days, kept the average above the limit for two; one came back under and four have no follow-up sample on file within 30 days. 10 ppm is also EPA’s health goal. That was also the latest year on file, and its 11 samples averaged below the limit. EPA recorded no violation for nitrate at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 11 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

65.1 ppb

Highest sample, Sept. 12, 2023; found in 12 of 12

The highest sample was 65.1 ppb, about 6.5 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 6 results

Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 8.5 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 6.5 ppb · Comes from the source

Averaged by year, the highest was 8.5 ppb, in 2023, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 10.8 ppb. In 2026, the latest year on file, its one sample was below the limit. EPA recorded no violation for arsenic at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.3 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.47 ppm

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.4 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.47 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.5 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.52 ppm, in 2012.

What handles it

About fluoride
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 2.8 ppb

Highest yearly average, 2025 · Comes from the source

Averaged by year, the highest was 2.8 ppb, in 2025, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 6.0 ppb. That is the only year on file.

What handles it

About uranium
Chromium (total), Legal limit 100 ppb; highest yearly average 5.1 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 4.8 ppb · Comes from the source

Averaged by year, the highest was 5.1 ppb, in 2023, below EPA’s legal limit of 100 ppb. Its highest single sample was 8.5 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.7 ppb, in 2019.

What handles it

About chromium (total)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.91 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.82 ppb · Forms or is added in treatment

Averaged by year, the highest was 0.91 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 3.3 ppb. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.94 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.13 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 0.13 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 2.1 ppb. In 2026, the latest year on file, it wasn’t found in any of its eight samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.8 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
California utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Nitrate/Nitrite (30 ppm challenge), Arsenic (Pentavalent)<=50 ppb Reduction

    For: Nitrate, Arsenic

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Nitrate/Nitrite Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Nitrate, Arsenic, Uranium

    Other claims that cover it: Nitrate; Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best reverse osmosis systems, ranked⁠

Hardness

Hard to very hard depending on the source, 164 to 300 mg/L (9.6 to 17.5 grains per gallon), across 9 sampling points, 2019 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Alco Water Service reported disinfecting with chlorine, not chloramine, at all 6 of its sampling points, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, fluoride, uranium, chromium (total), total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are California’s own from 2020 on, with EPA’s national file for 2012 to 2019. Alco Water Service’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 7 to Sept. 12, 2023; California’s results run from Jan. 21, 2020 to June 29, 2026.

Testing your own tap

Alco Water Service’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab California certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Alco Water Service’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Alco Water Service’s results flag: nitrate and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs California certifies closest to the area Alco Water Service serves, or a kit by mail

The 3 labs California certifies closest to the area Alco Water Service serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Monterey County Consolidated Environmental Laboratory

    Salinas, CA · about 1 mile

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (831) 755-4516

  • Monterey Bay Analytical Services, Inc.

    Monterey, CA · about 14 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, radioactivity

    (831) 375-6227

  • CM Analytical, Inc.

    Gilroy, CA · about 21 miles

    Certified for bacteria

    (408) 848-3619

All 145 certified labs for California⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that California certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against California’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID CA2710001. Rebuilt from EPA data on Oct. 25, 2026.