Skip to content
TapBuff

City of Yuma

EPA’s and the City of Yuma’s records have results for 38 contaminants in its water; 9 were found.

Serves 103,264 people · Surface water · Yuma, AZ

Serves
103,264 people
Connections
32,641
Water source
Surface water
Based in
Yuma, AZ
County
Yuma
Owner
Local government
The 2 ZIP codes it serves

85364, 85365

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 23 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for arsenic, uranium and lead, if you want them lower⁠The 23 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 12, 2023 to Feb. 20, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2008 to 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, fluoride and nitrate: the annual water quality reports the City of Yuma publishes, 2020 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Uranium and chromium (total): EPA’s compliance monitoring file, samples taken from Jan. 17, 2012 to Jan. 15, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

150 ppb

Highest sample, Oct. 11, 2023; found in 8 of 8

The highest sample was 150 ppb, about 15 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 8 results

Arsenic, uranium and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 79 ppb

Highest yearly average, 2020 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 79 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 100 ppb. That was also the latest year on file. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 62.5 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 17 ppb

Highest yearly average, 2020 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 17 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 24 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 12.6 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.1 ppb

Highest yearly average, 2020 to 2025 · 2025 average: 1.4 ppb · Comes from the source

Averaged by year, the highest was 2.1 ppb, in 2023, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 2.4 ppb. In 2025, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.0 ppb, in 2018.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.45 ppm

Highest yearly average, 2020 to 2025 · 2025 average: 0.4 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.45 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.51 ppm. In 2025, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.47 ppm, in 2012.

What handles it

About fluoride
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 3.3 ppb

Highest yearly average, 2017 · Comes from the source

Averaged by year, the highest was 3.3 ppb, in 2017, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 4.0 ppb. That is the only year on file.

What handles it

About uranium
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.1 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.1 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Nitrate, Legal limit 10 ppm; highest 0.44 ppm

Highest result, 2023 · 2025 average: 0.39 ppm · Comes from the source

The highest sample, in 2023, was 0.44 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.34 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 0.5 ppb

Highest yearly average, 2012 to 2019 · 2019: not found · Comes from the source

Averaged by year, the highest was 0.5 ppb, in 2017, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.0 ppb. In 2019, the latest year on file, it wasn’t found in any of its three samples.

What handles it

About chromium (total)
Arizona utilities above EPA’s PFAS limits⁠
29 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

23 health-based violations since 2016, 22 for chlorine dioxide and 1 for total organic carbon. The latest began March 1, 2022.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Chlorine dioxideThe disinfectant was above its maximum allowed level.EPA: Acute Maximum Residual Disinfectant LevelMarch 1, 2022 to March 31, 2022, 1.0 MG/LResolved
Feb. 1, 2022 to Feb. 28, 2022, 1.6 MG/LResolved
Jan. 1, 2022 to Jan. 31, 2022, 1.3 MG/LResolved
Dec. 1, 2021 to Dec. 31, 2021, 1.3 MG/LResolved
Nov. 1, 2021 to Nov. 30, 2021, 1.3 MG/LResolved
The other 18, back to 2020
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Chlorine dioxideThe disinfectant was above its maximum allowed level.EPA: Acute Maximum Residual Disinfectant LevelOct. 1, 2021 to Oct. 31, 2021, 1.0 MG/LResolved
Total organic carbonNot enough organic matter was removed. It reacts with disinfectant to form byproducts.EPA: Treatment Technique Precursor RemovalOct. 1, 2021 to Dec. 31, 2021, 0.88 RATIOResolved
Chlorine dioxideThe disinfectant was above its maximum allowed level.EPA: Acute Maximum Residual Disinfectant LevelSept. 1, 2021 to Sept. 30, 2021, 1.1 MG/LResolved
Aug. 1, 2021 to Aug. 31, 2021, 1.2 MG/LResolved
Chlorine dioxideNon-Acute MRDLAug. 1, 2021 to Aug. 31, 2021Resolved
Chlorine dioxideThe disinfectant was above its maximum allowed level.EPA: Acute Maximum Residual Disinfectant LevelJuly 1, 2021 to July 31, 2021, 1.5 MG/LResolved
June 1, 2021 to June 30, 2021, 1.0 MG/LResolved
May 1, 2021 to May 31, 2021, 1.2 MG/LResolved
April 1, 2021 to April 30, 2021, 1.1 MG/LResolved
March 1, 2021 to March 31, 2021, 1.3 MG/LResolved
Feb. 1, 2021 to Feb. 28, 2021, 2.0 MG/LResolved
Jan. 1, 2021 to Jan. 31, 2021, 0.9 MG/LResolved
Dec. 1, 2020 to Dec. 31, 2020, 1.0 MG/LResolved
Nov. 1, 2020 to Nov. 30, 2020, 0.9 MG/LResolved
Oct. 1, 2020 to Oct. 31, 2020, 0.9 MG/LResolved
Sept. 1, 2020 to Sept. 30, 2020, 1.7 MG/LResolved
Aug. 1, 2020 to Aug. 31, 2020, 1.4 MG/LResolved
July 1, 2020 to July 31, 2020, 1.0 MG/LResolved

Health-based violations only. 61 monitoring or reporting violations not shown.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium, Lead Reduction

    For: Arsenic, Uranium, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

City of Yuma reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2023 to 2024 sampling for EPA. It also reported chlorine dioxide.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, fluoride and nitrate results here are from the annual water quality reports the City of Yuma publishes, from 2020 on, with EPA’s national file for 2012 to 2019. Uranium and chromium (total) come from EPA’s file alone, which ends in 2019: the reports read here give no figure for them across the whole system. City of Yuma’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 12, 2023 to Feb. 20, 2024; the reports the City of Yuma publishes cover 2020 to 2025; EPA’s compliance samples are from Jan. 17, 2012 to Jan. 15, 2019.

Testing your own tap

City of Yuma’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Arizona certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Yuma’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 1.1 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Yuma’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 2 labs Arizona certifies closest to the area City of Yuma serves, or a kit by mail

The 2 labs Arizona certifies closest to the area City of Yuma serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 49 certified labs for Arizona⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Arizona certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Arizona’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AZ0414024. Rebuilt from EPA data on Oct. 25, 2026.