Skip to content
TapBuff

Warrior River Water Authority

EPA’s and Alabama’s records have results for 37 contaminants in its water; 10 were found.

Serves 38,700 people · Surface water · Bessemer, AL · Hardness: moderately hard

Serves
38,700 people
Connections
12,900
Water source
Surface water
Based in
Bessemer, AL
County
Jefferson
Owner
Local government
Hardness
Moderately hard
The 4 ZIP codes it serves

35006, 35023, 35111, 35118

The short answer

EPA recorded a violation of the legal limit for total trihalomethanes (TTHM) here in 2024. In 2026, the latest year on file, it averaged 50.2 ppb, below the limit. PFOS and PFOA had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Dec. 5, 2023 to Sept. 30, 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic and chromium (total): Alabama’s own results, samples taken from Feb. 12, 2020 to Aug. 12, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFPeA at 6.0 ppt: see them below.

A legal-limit violation on record, below the limit in the latest year, 1 result

Total trihalomethanes (TTHM)

Forms or is added in treatment

Violation on record (2024)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.

55.6 ppb

Highest yearly average, 2020 to 2026

2026 average: 50.2 ppb

Averaged by year, the highest was 55.6 ppb, in 2024, below EPA’s legal limit of 80 ppb. Its highest single sample was 150 ppb. In 2026, the latest year on file, its 15 samples averaged below the limit. EPA recorded a violation for total trihalomethanes (TTHM) at this utility in 2024.

How it’s judged

EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 45.5 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

A sample above EPA’s 2029 limit, below it on average, 2 results

PFOS

Comes from the source

A sample above EPA’s 2029 limit

5.7 ppt

Highest sample, June 19, 2024; found in 1 of 8

The highest sample was 5.7 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 1.4 ppt, below it.

What handles it

PFOA

Comes from the source

A sample above EPA’s 2029 limit

4.2 ppt

Highest sample, June 19, 2024; found in 1 of 8

The highest sample was 4.2 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 1.1 ppt, below it.

What handles it

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 12.7 ppb

Highest sample, Dec. 5, 2023; found in 4 of 8 · Comes from the source

The highest sample was 12.7 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 35.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 29.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 35.1 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 88 ppb. In 2026, the latest year on file, its 15 samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 26.8 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.66 ppm

Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment

Averaged by year, the highest was 0.66 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.75 ppm, in 2018.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.67 ppm

Highest sample; found in 19 of 22 · 2026 average: 0.23 ppm · Comes from the source

The highest sample, in 2023, was 0.67 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.9 ppm, in 2018.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
PFBS, Health benchmark 2,000 ppt; highest 3.0 ppt

Highest sample, June 19, 2024; found in 1 of 8 · Comes from the source

The highest sample was 3.0 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit4.2 ppt highest, found in 1 of 8 samples. Details
PFOS4.0 pptA sample above EPA’s 2029 limit5.7 ppt highest, found in 1 of 8 samples. Details
PFHxS10 pptNot foundNot found in any of 8 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 8 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 8 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.0 ppt highest, found in 1 of 8 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Alabama utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA6.0 ppt2 of 8None covers it
PFHxA4.7 ppt1 of 8None covers it
27 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: Trihalomethanes (TTHM) Reduction, PFOS Reduction, PFOA Reduction

    For: Total trihalomethanes (TTHM), PFOS, PFOA

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: VOC Reduction; Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Trihalomethanes (TTHM) Reduction, Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA)

    For: Total trihalomethanes (TTHM), PFOS, PFOA

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover all 3 first⁠

The best water filters for TTHM, ranked⁠

The best water filters for PFAS, ranked⁠

Hardness

Moderately hard, 120 mg/L (7 grains per gallon), at its one sampling point, 2015 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Warrior River Water Authority reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2023 to 2024 sampling for EPA. It also reported chlorine dioxide.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for TTHM. It began July 1, 2024.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJuly 1, 2024 to Sept. 30, 2024, 81 ppbResolved

Health-based violations only. 4 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic and chromium (total) results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. Warrior River Water Authority’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Dec. 5, 2023 to Sept. 30, 2024; Alabama’s results run from Feb. 12, 2020 to Aug. 12, 2026.

Testing your own tap

Warrior River Water Authority’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alabama certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Warrior River Water Authority’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Warrior River Water Authority’s results flag: total trihalomethanes (TTHM), PFOS and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Alabama certifies closest to the area Warrior River Water Authority serves, or a kit by mail

The 3 labs Alabama certifies closest to the area Warrior River Water Authority serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Safety Environmental Services

    Pelham, AL · about 16 miles

    Certified for bacteria

    (205) 823-6200

  • Sutherland Environmental Testing Laboratory

    Birmingham, AL · about 18 miles

    (205) 581-9500

  • Living Water Services

    Alabaster, AL · about 23 miles

    Certified for bacteria

    (205) 985-2113

All 64 certified labs for Alabama⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AL0000763. Rebuilt from EPA data on Oct. 25, 2026.