Skip to content
TapBuff

Red Bay, the Water Works & Gas Bd

EPA’s and Alabama’s records have results for 37 contaminants in its water; 3 were found.

Serves 6,048 people · Groundwater influenced by surface water · Red Bay, AL · Hardness: soft

Serves
6,048 people
Connections
2,016
Water source
Groundwater influenced by surface water
Based in
Red Bay, AL
County
Franklin
Owner
Local government
Hardness
Soft
The 2 ZIP codes it serves

35582, 35645

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 29 to Dec. 17, 2024.

Copper: EPA’s file records a utility’s copper only when it exceeds the action level. The last here was 2.0 ppm, for the period ending June 30, 1994. None since is on file, so it is not counted as a current finding.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total) and fluoride: Alabama’s own results, samples taken from Feb. 14, 2020 to Aug. 10, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 1.7 ppm

Highest sample; found in 8 of 8 · 2026, one sample: 1.2 ppm · Comes from the source

The highest sample, in 2022, was 1.7 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.1 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 5.5 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 4.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 5.5 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 17 ppb. In 2026, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 6.7 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 1.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 2.9 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 11 ppb. In 2026, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 4.6 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Alabama utilities above EPA’s PFAS limits⁠
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 37 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Soft, 38 mg/L (2.2 grains per gallon), at its one sampling point, 2019 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Red Bay, the Water Works & Gas Bd reported another disinfectant but neither chlorine nor chloramine, in its 2024 sampling for EPA.

What that means

Most utilities add chlorine or chloramine, CDC says. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total) and fluoride results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. Red Bay, the Water Works & Gas Bd’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 29 to Dec. 17, 2024; Alabama’s results run from Feb. 14, 2020 to Aug. 10, 2026.

Testing your own tap

Red Bay, the Water Works & Gas Bd’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alabama certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Red Bay, the Water Works & Gas Bd’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Alabama certifies closest to the area Red Bay, the Water Works & Gas Bd serves, or a kit by mail

The 3 labs Alabama certifies closest to the area Red Bay, the Water Works & Gas Bd serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Southern Environmental Testing

    Florence, AL · about 12 miles

    Certified for bacteria

    (256) 740-5532

  • Pace Analytical National Decatur

    Decatur, AL · about 46 miles

    Certified for bacteria

    (256) 350-0846

  • Limestone County Bacteriological Laboratory

    Athens, AL · about 47 miles

    Certified for bacteria

    (256) 233-6445 ext. 125

All 64 certified labs for Alabama⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AL0000607. Rebuilt from EPA data on Oct. 25, 2026.