Orange Beach Water Sewer and F.P.A.
EPA’s and Alabama’s records have results for 37 contaminants in its water; 4 were found.
Serves 17,796 people · Groundwater · Orange Beach, AL · Hardness: soft
- Serves
- 17,796 people
- Connections
- 5,932
- Water source
- Groundwater
- Based in
- Orange Beach, AL
- County
- Baldwin
- Owner
- Local government
- Hardness
- Soft
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Aug. 16, 2023 to Feb. 13, 2024.
Fluoride, total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), arsenic and chromium (total): Alabama’s own results, samples taken from March 16, 2020 to Sept. 21, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Below EPA’s limits, 4 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.72 ppm
Highest yearly average, 2020 to 2025 · 2025: not found · Forms or is added in treatment
Averaged by year, the highest was 0.72 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2025, the latest year on file, it wasn’t found in its one sample.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 12.8 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 11 ppb · Forms or is added in treatment
Averaged by year, the highest was 12.8 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 37 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 16.2 ppb, in 2013.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Nitrate, Legal limit 10 ppm; highest 1.1 ppm
Highest sample; found in 7 of 14 · 2026 average: 0.55 ppm · Comes from the source
The highest sample, in 2026, was 1.1 ppm, below EPA’s legal limit of 10 ppm. That was also the latest year on file, and its two samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.9 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.8 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 2.4 ppb · Forms or is added in treatment
Averaged by year, the highest was 3.8 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 7.4 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 5.9 ppb, in 2018.
What handles it
No certification claim covers this compound yet.
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
No health-based violations on file with EPA since 2016. There are 99 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Hardness
Soft, 12 mg/L (0.7 grains per gallon), at its one sampling point, 2016 to 2025.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Orange Beach Water Sewer and F.P.A. reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 to 2024 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Fluoride, total trihalomethanes (TTHM), nitrate, haloacetic acids (HAA5), arsenic and chromium (total) results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. Orange Beach Water Sewer and F.P.A.’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Aug. 16, 2023 to Feb. 13, 2024; Alabama’s results run from March 16, 2020 to Sept. 21, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Orange Beach Water Sewer and F.P.A.’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Alabama certifies closest to the area Orange Beach Water Sewer and F.P.A. serves, or a kit by mail
The 3 labs Alabama certifies closest to the area Orange Beach Water Sewer and F.P.A. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Eurofins Pensacola
Pensacola, FL · about 28 miles
Mobile Water Service Laboratory
Mobile, AL · about 34 miles
Certified for bacteria
Pace Analytical Services - Mobile
Mobile, AL · about 40 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportOrange Beach Water Sewer and F.P.A. must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Alabama Department of Environmental Management, Drinking Water Branch, results from Jan. 6, 2020 to Oct. 8, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: ADEM, certified bacteriological, chemical and PFAS drinking water laboratories, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Alabama Department of Environmental Management, Drinking Water Branch, results from March 21, 2016 to May 14, 2025, read Oct. 17, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID AL0000053. Rebuilt from EPA data on Oct. 25, 2026.