Skip to content
TapBuff

Madison County Water Department

EPA’s and Alabama’s records have results for 37 contaminants in its water; 8 were found.

Serves 119,100 people · Surface water bought from another system · Huntsville, AL · Hardness: hard

Serves
119,100 people
Connections
39,700
Water source
Surface water bought from another system
Based in
Huntsville, AL
County
Madison
Owner
Local government
Hardness
Hard
The 14 ZIP codes it serves

35739, 35741, 35748, 35749, 35750, 35757, 35759, 35760, 35761, 35763, 35773, 35776, 35810, 35811

The short answer

None of the results here is above a limit in force today. PFOS had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Dec. 3, 2024 to Sept. 8, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2015 to 2026.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, arsenic and chromium (total): Alabama’s own results, samples taken from Jan. 16, 2020 to July 16, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFOS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. One other PFAS with no federal limit was found, the highest PFBA at 8.3 ppt: see it below.

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOS

Comes from the source

A sample above EPA’s 2029 limit

5.0 ppt

Highest sample, Sept. 8, 2025; found in 3 of 10

The highest sample was 5.0 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 3.5 ppt, below it.

What handles it

Below EPA’s limits, 6 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 47.9 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 47.9 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 70.9 ppb. That was also the latest year on file. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 39 ppb, in 2016.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 43 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 43 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 73.7 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 46.8 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 4.3 ppm

Highest sample; found in 24 of 24 · 2026 average: 2.9 ppm · Comes from the source

The highest sample, in 2025, was 4.3 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.4 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.65 ppm

Highest yearly average, 2022 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.65 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.8 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.58 ppm, in 2013.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.0 ppb

90th percentile, 2024 to 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
PFBS, Health benchmark 2,000 ppt; highest 4.7 ppt

Highest sample, June 3, 2025; found in 4 of 10 · Comes from the source

The highest sample was 4.7 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 10 samples, below 4 ppt
PFOS4.0 pptA sample above EPA’s 2029 limit5.0 ppt highest, found in 3 of 10 samples. Details
PFHxS10 pptNot foundNot found in any of 10 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 10 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 10 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits4.7 ppt highest, found in 4 of 10 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Alabama utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA8.3 ppt2 of 10None covers it
29 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, Lead Reduction

    For: PFOS, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Lead Reduction

    For: PFOS, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Hard, 122 mg/L (7.1 grains per gallon), at its one sampling point, 2016 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Madison County Water Department reported disinfecting with chlorine, not chloramine, at all 4 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 29 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, arsenic and chromium (total) results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. Madison County Water Department’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Dec. 3, 2024 to Sept. 8, 2025; Alabama’s results run from Jan. 16, 2020 to July 16, 2026.

Testing your own tap

Madison County Water Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alabama certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Madison County Water Department’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 2.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Madison County Water Department’s results flag: PFOS. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Alabama certifies closest to the area Madison County Water Department serves, or a kit by mail

The 3 labs Alabama certifies closest to the area Madison County Water Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Limestone County Bacteriological Laboratory

    Athens, AL · about 25 miles

    Certified for bacteria

    (256) 233-6445 ext. 125

  • Pace Analytical National Decatur

    Decatur, AL · about 30 miles

    Certified for bacteria

    (256) 350-0846

  • Southern Environmental Testing

    Decatur, AL · about 30 miles

    Certified for bacteria

    (256) 280-2567

All 64 certified labs for Alabama⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AL0000888. Rebuilt from EPA data on Oct. 25, 2026.