Skip to content
TapBuff

Heflin, the Water Works and Sewer Board

EPA’s and Alabama’s records have results for 37 contaminants in its water; 3 were found.

Serves 4,590 people · Surface water · Heflin, AL · Hardness: soft

Serves
4,590 people
Connections
1,530
Water source
Surface water
Based in
Heflin, AL
County
Cleburne
Owner
Local government
Hardness
Soft
The ZIP code it serves

36264

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 7 to Nov. 6, 2023.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, arsenic, chromium (total) and nitrate: Alabama’s own results, samples taken from Feb. 18, 2020 to Aug. 18, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 46.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 27.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 46.6 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 79 ppb. In 2026, the latest year on file, its nine samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 32.3 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 36.7 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 36.7 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 79.4 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 33.5 ppb, in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.93 ppm

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.6 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.93 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.2 ppm, in 2014.

What handles it

About fluoride
Alabama utilities above EPA’s PFAS limits⁠
34 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Nitrate

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 65 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Soft, 24 mg/L (1.4 grains per gallon), at its one sampling point, 2015 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Disinfectant

Heflin, the Water Works and Sewer Board reported disinfecting with chlorine, not chloramine, at all 2 of its sampling points, in its 2023 sampling for EPA. It also reported permanganate.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, arsenic, chromium (total) and nitrate results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. Heflin, the Water Works and Sewer Board’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 7 to Nov. 6, 2023; Alabama’s results run from Feb. 18, 2020 to Aug. 18, 2026.

Testing your own tap

Heflin, the Water Works and Sewer Board’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alabama certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Heflin, the Water Works and Sewer Board’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Alabama certifies closest to the area Heflin, the Water Works and Sewer Board serves, or a kit by mail

The 3 labs Alabama certifies closest to the area Heflin, the Water Works and Sewer Board serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Chattahoochee Valley Water Supply District

    Lanett, AL · about 52 miles

    Certified for bacteria

    (334) 644-3777

  • Alexander City Sugar Creek Laboratory

    Alexander City, AL · about 52 miles

    Certified for bacteria

    (256) 409-2031

  • Guardian Systems

    Leeds, AL · about 58 miles

    Certified for bacteria

    (205) 699-6647

All 64 certified labs for Alabama⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AL0000279. Rebuilt from EPA data on Oct. 25, 2026.