Skip to content
TapBuff

City of Tuskegee, Utilities Board of the

EPA’s and Alabama’s records have results for 37 contaminants in its water; 9 were found.

Serves 12,900 people · Surface water · Tuskegee, AL · Hardness: soft

Serves
12,900 people
Connections
4,170
Water source
Surface water
Based in
Tuskegee, AL
County
Macon
Owner
Local government
Hardness
Soft
The 3 ZIP codes it serves

36083, 36087, 36088

The short answer

EPA recorded a violation of the legal limit for total trihalomethanes (TTHM) here in 2020. In 2026, the latest year on file, it averaged 42.6 ppb, below the limit. PFOA had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. 8 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 8 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 26 to Dec. 2, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2002 to 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic, nitrate and chromium (total): Alabama’s own results, samples taken from Feb. 19, 2020 to Aug. 19, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOA was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. One other PFAS with no federal limit was found, the highest PFPeA at 3.5 ppt: see it below.

A legal-limit violation on record, below the limit in the latest year, 1 result

Total trihalomethanes (TTHM)

Forms or is added in treatment

Violation on record (2020)

What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.

53.5 ppb

Highest yearly average, 2020 to 2026

2026 average: 42.6 ppb

Averaged by year, the highest was 53.5 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 87.5 ppb. In 2026, the latest year on file, its 15 samples averaged below the limit. EPA recorded a violation for total trihalomethanes (TTHM) at this utility in 2020.

How it’s judged

EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 91.2 ppb, in 2019, and EPA recorded violations in 2014, 2018 and 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOA

Comes from the source

A sample above EPA’s 2029 limit

5.5 ppt

Highest sample, June 5, 2025; found in 1 of 4

The highest sample was 5.5 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 1.4 ppt, below it.

What handles it

Below EPA’s limits, 6 results

Lead and arsenic have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 31.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 21.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 31.3 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 58 ppb. In 2026, the latest year on file, its 15 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 47.7 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.81 ppm

Highest yearly average, 2020 to 2025 · 2025, one sample: 0.48 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.81 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.88 ppm, in 2016.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.8 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.8 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.28 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 0.28 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2025, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.31 ppb, in 2018.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 0.23 ppm

Highest sample; found in 6 of 6 · 2025, one sample: 0.11 ppm · Comes from the source

The highest sample, in 2024, was 0.23 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.3 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 0.6 ppb

Highest yearly average, 2020 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 0.6 ppb, in 2024, below EPA’s legal limit of 100 ppb. In 2025, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit5.5 ppt highest, found in 1 of 4 samples. Details
PFOS4.0 pptNot foundNot found in any of 4 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 4 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 4 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 4 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 4 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Alabama utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA3.5 ppt1 of 4None covers it
28 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: Trihalomethanes (TTHM) Reduction, PFOA Reduction, Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Total trihalomethanes (TTHM), PFOA, Lead, Arsenic

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: VOC Reduction; Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Trihalomethanes (TTHM) Reduction, Perfluorooctanoic Acid (PFOA), Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Total trihalomethanes (TTHM), PFOA, Lead, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for TTHM, ranked⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

The best reverse osmosis systems, ranked⁠

Hardness

Soft, 34 mg/L (2 grains per gallon), at its one sampling point, 2015 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

Violations since 2016

8 health-based violations since 2016, all for TTHM. The latest began Jan. 1, 2020.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2020 to March 31, 2020, 103 ppbResolved
Oct. 1, 2019 to Dec. 31, 2019, 107 ppbResolved
July 1, 2019 to Sept. 30, 2019, 121 ppbResolved
April 1, 2019 to June 30, 2019, 115 ppbResolved
Jan. 1, 2019 to March 31, 2019, 96 ppbResolved
The other 3, back to 2018
Earlier health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2018 to Dec. 31, 2018, 97 ppbResolved
July 1, 2018 to Sept. 30, 2018, 100 ppbResolved
April 1, 2018 to June 30, 2018, 98 ppbResolved

Health-based violations only. 16 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, arsenic, nitrate and chromium (total) results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Tuskegee, Utilities Board of the’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 26 to Dec. 2, 2025; Alabama’s results run from Feb. 19, 2020 to Aug. 19, 2026.

Testing your own tap

City of Tuskegee, Utilities Board of the’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alabama certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Tuskegee, Utilities Board of the’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 2.8 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Tuskegee, Utilities Board of the’s results flag: total trihalomethanes (TTHM) and PFOA. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Alabama certifies closest to the area City of Tuskegee, Utilities Board of the serves, or a kit by mail

The 3 labs Alabama certifies closest to the area City of Tuskegee, Utilities Board of the serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Environmental Resource Analysts

    Auburn, AL · about 16 miles

    Certified for bacteria

    (334) 502-3444

  • Montgomery Industrial Waste Laboratory

    Montgomery, AL · about 32 miles

    Certified for bacteria

    (334) 206-1706

  • Five Star Filter Plant Bacteriological Laboratory

    Wetumpka, AL · about 33 miles

    Certified for bacteria

    (334) 567-1366

All 64 certified labs for Alabama⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AL0000870. Rebuilt from EPA data on Oct. 25, 2026.