Skip to content
TapBuff

City of Selma, the Ww and Sb of the

EPA’s and Alabama’s records have results for 37 contaminants in its water; 6 were found.

Serves 21,834 people · Groundwater · Selma, AL · Hardness: moderately hard

Serves
21,834 people
Connections
7,278
Water source
Groundwater
Based in
Selma, AL
County
Dallas
Owner
Local government
Hardness
Moderately hard
The 3 ZIP codes it serves

36701, 36702, 36703

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 28, 2024 to April 14, 2025.

Fluoride, total trihalomethanes (TTHM), nitrate, chromium (total), haloacetic acids (HAA5) and arsenic: Alabama’s own results, samples taken from Jan. 27, 2020 to July 30, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 6 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 10.3 ppb

Highest sample, Oct. 28, 2024; found in 1 of 4 · Comes from the source

The highest sample was 10.3 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.51 ppm

Highest yearly average, 2022 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.51 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.76 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.6 ppm, in 2013.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 5.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 4.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 5.7 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 29 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 5.9 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 0.24 ppm

Highest sample; found in 5 of 23 · 2026: not found · Comes from the source

The highest sample, in 2022, was 0.24 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.9 ppm, in 2014.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 2.0 ppb

Highest yearly average, 2022 to 2025 · 2025: not found · Comes from the source

Averaged by year, the highest was 2.0 ppb, in 2024, below EPA’s legal limit of 100 ppb. In 2025, the latest year on file, it wasn’t found in any of its three samples.

What handles it

About chromium (total)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.85 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 0.47 ppb · Forms or is added in treatment

Averaged by year, the highest was 0.85 ppb, in 2022, below EPA’s legal limit of 60 ppb. Its highest single sample was 6.0 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.6 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Alabama utilities above EPA’s PFAS limits⁠
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 8 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Hardness

Moderately hard, 105 mg/L (6.1 grains per gallon), at its one sampling point, 2016 to 2025.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

What this report can’t tell you

  • Everything else. Fluoride, total trihalomethanes (TTHM), nitrate, chromium (total), haloacetic acids (HAA5) and arsenic results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Selma, the Ww and Sb of the’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 28, 2024 to April 14, 2025; Alabama’s results run from Jan. 27, 2020 to July 30, 2026.

Testing your own tap

City of Selma, the Ww and Sb of the’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Alabama certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Selma, the Ww and Sb of the’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Alabama certifies closest to the area City of Selma, the Ww and Sb of the serves, or a kit by mail

The 3 labs Alabama certifies closest to the area City of Selma, the Ww and Sb of the serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Prattville Branch Laboratory

    Prattville, AL · about 33 miles

    Certified for bacteria

    (334) 260-3400

  • Montgomery Industrial Waste Laboratory

    Montgomery, AL · about 44 miles

    Certified for bacteria

    (334) 206-1706

  • Five Star Filter Plant Bacteriological Laboratory

    Wetumpka, AL · about 47 miles

    Certified for bacteria

    (334) 567-1366

All 64 certified labs for Alabama⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID AL0000490. Rebuilt from EPA data on Oct. 25, 2026.