City of Pelham
EPA’s and Alabama’s records have results for 37 contaminants in its water; 12 were found.
Serves 38,703 people · Surface water bought from another system · Pelham, AL · Hardness: very hard
- Serves
- 38,703 people
- Connections
- 12,901
- Water source
- Surface water bought from another system
- Based in
- Pelham, AL
- County
- Shelby
- Owner
- Local government
- Hardness
- Very hard
The short answer
None of the results here is above a limit in force today. PFOA and PFOS are above EPA’s new limit, which takes effect in 2029. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Dec. 16, 2024 to Sept. 15, 2025.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, chromium (total), fluoride and arsenic: Alabama’s own results, samples taken from Jan. 20, 2020 to July 23, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFAS: PFOA, PFOS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFPeA at 32.2 ppt: see them below.
Above EPA’s new limit, which takes effect in 2029, 2 results
PFOA
Comes from the source
11.6 ppt
Highest sample, Dec. 16, 2024; found in 3 of 14
The highest sample was 11.6 ppt, about 2.9 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 6.0 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
PFOS
Comes from the source
5.6 ppt
Highest sample, Dec. 16, 2024; found in 3 of 14
The highest sample was 5.6 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 4.8 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
Below EPA’s limits, 6 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 51.9 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 37.7 ppb · Forms or is added in treatment
Averaged by year, the highest was 51.9 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 79.7 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 58.7 ppb, in 2013, and EPA recorded a violation in 2013.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 29 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 13.5 ppb · Forms or is added in treatment
Averaged by year, the highest was 29 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 56 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 28.4 ppb, in 2019.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 1.9 ppm
Highest sample; found in 28 of 28 · 2026 average: 1.0 ppm · Comes from the source
The highest sample, in 2024, was 1.9 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 1.2 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
PFBS, Health benchmark 2,000 ppt; highest 64.3 ppt
Highest sample, Dec. 16, 2024; found in 9 of 14 · Comes from the source
The highest sample was 64.3 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Chromium (total), Legal limit 100 ppb; highest yearly average 2.0 ppb
Highest yearly average, 2021 to 2026 · 2026: not found · Comes from the source
Averaged by year, the highest was 2.0 ppb, in 2024, below EPA’s legal limit of 100 ppb. Its highest single sample was 3.0 ppb. In 2026, the latest year on file, it wasn’t found in any of its four samples.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.053 ppm
Highest yearly average, 2021 to 2026 · 2026: not found · Forms or is added in treatment
Averaged by year, the highest was 0.053 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.21 ppm. In 2026, the latest year on file, it wasn’t found in any of its four samples.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Above EPA’s new limit (2029)11.6 ppt highest, found in 3 of 14 samples. Details |
| PFOS | 4.0 ppt | Above EPA’s new limit (2029)5.6 ppt highest, found in 3 of 14 samples. Details |
| PFHxS | 10 ppt | Not foundNot found in any of 14 samples, below 3 ppt |
| PFNA | 10 ppt | Not foundNot found in any of 14 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 14 samples, below 5 ppt |
| PFBS | Index only | Below EPA’s limits64.3 ppt highest, found in 9 of 14 samples. Details |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Doesn’t applyDoesn’t apply: no sampling location found two or more of the four |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFPeA | 32.2 ppt | 7 of 14 | None covers it |
| PFHxA | 18.5 ppt | 4 of 14 | None covers it |
| PFBA | 15.4 ppt | 4 of 14 | None covers it |
| PFHpA | 5.5 ppt | 2 of 14 | NSF/ANSI 53: Total PFAS Reduction |
25 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFDA
- PFDoA
- PFEESA
- PFHpS
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.
- NSF/ANSI 53
Claims: PFOA Reduction, PFOS Reduction
For: PFOA, PFOS
Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)
Other claims that cover it: Total PFAS Reduction
- NSF/ANSI 58
Claims: Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS)
For: PFOA, PFOS
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOA, PFOS
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOA, PFOS
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: PFOA, PFOS
2 more filters
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: PFOA, PFOS
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: PFOA, PFOS
Hardness
Very hard, 181 mg/L (10.6 grains per gallon), at its one sampling point, 2015 to 2026.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
City of Pelham reported chlorine, not chloramine, at 5 of its 6 sampling points, and only other disinfectants at 1, in its 2024 to 2025 sampling for EPA. It also reported chlorine dioxide, hydrogen peroxide and permanganate.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 21 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, chromium (total), fluoride and arsenic results here are Alabama’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Pelham’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Dec. 16, 2024 to Sept. 15, 2025; Alabama’s results run from Jan. 20, 2020 to July 23, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Pelham’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What City of Pelham’s results flag: PFOA and PFOS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Alabama certifies closest to the area City of Pelham serves, or a kit by mail
The 3 labs Alabama certifies closest to the area City of Pelham serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Living Water Services
Alabaster, AL · about 9 miles
Certified for bacteria
Safety Environmental Services
Pelham, AL · about 13 miles
Certified for bacteria
Sutherland Environmental Testing Laboratory
Birmingham, AL · about 14 miles
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Alabama certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Alabama’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 2 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with PFOA
- Get the utility’s own reportCity of Pelham must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Alabama Department of Environmental Management, Drinking Water Branch, results from Jan. 6, 2020 to Oct. 8, 2026, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: ADEM, certified bacteriological, chemical and PFAS drinking water laboratories, read Oct. 17, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Alabama Department of Environmental Management, Drinking Water Branch, results from July 21, 2015 to July 23, 2026, read Oct. 17, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID AL0001163. Rebuilt from EPA data on Oct. 25, 2026.
Towns it serves
Also in Shelby County
- City of Alabaster Water Department40,986
- Shelby County Commission - Water Services40,101
- City of Calera, the Wwb of Te26,982
- City of Helena, the Ub of the21,300
- Town of Columbiana, the Ww Board of the12,903
- Montevallo Water Works & Sewer Board10,746