Page - Bcpsa
EPA’s and Virginia’s records have results for 2 contaminants in its water; 2 were found.
Serves 50 people · Surface water bought from another system · Vansant, VA
- Serves
- 50 people
- Connections
- 12
- Water source
- Surface water bought from another system
- Based in
- Vansant, VA
- County
- Buchanan
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, not everything. 1 health-based violation since 2016, resolved in EPA’s file.
What was found
Where these results come from, and when
Total trihalomethanes (TTHM) and haloacetic acids (HAA5): Virginia’s own results, samples taken from Feb. 10, 2020 to Aug. 11, 2026, with EPA’s 2012 to 2019 file for earlier years.
Below EPA’s limits, 2 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 75.7 ppb
Highest yearly average, 2020 to 2026 · Forms or is added in treatment
Averaged by year, the highest was 75.7 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 113 ppb. That was also the latest year on file. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 116 ppb, in 2015, and EPA recorded a violation in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 41.5 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 27.7 ppb · Forms or is added in treatment
Averaged by year, the highest was 41.5 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 62 ppb. In 2026, the latest year on file, its three samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 72.5 ppb, in 2015.
What handles it
No certification claim covers this compound yet.
Violations since 2016
1 health-based violation since 2016 for TTHM. It began July 1, 2018.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | July 1, 2018 to Sept. 30, 2018, 82 ppb | Resolved |
Health-based violations only.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) results here are Virginia’s own from 2020 on, with EPA’s national file for 2012 to 2019. Page - Bcpsa’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Virginia’s results run from Feb. 10, 2020 to Aug. 11, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. About lead.
Labs Virginia certifies, or a kit by mail
No lab Virginia certifies is within 75 miles of the area Page - Bcpsa serves on the state’s list. Some take samples by mail; the state’s page lists them all.
All 145 certified labs for VirginiaOr test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Virginia certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Virginia’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportPage - Bcpsa must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Virginia Department of Health, Drinking Water Viewer, results from Jan. 2, 2020 to Oct. 14, 2026, read Oct. 24, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID VA1027068. Rebuilt from EPA data on Oct. 25, 2026.