Skip to content
TapBuff

Bedford Hills

EPA’s and Virginia’s records have results for 7 contaminants in its water; 2 were found.

Serves 58 people · Groundwater · Charlottesville, VA

Serves
58 people
Connections
22
Water source
Groundwater
Based in
Charlottesville, VA
County
Albemarle
Owner
Private

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 1 health-based violation since 2016, resolved in EPA’s file.

The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

Fluoride, total trihalomethanes (TTHM), arsenic, chromium (total), haloacetic acids (HAA5) and nitrate: Virginia’s own results, samples taken from Aug. 26, 2020 to Sept. 28, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 2 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Fluoride, Legal limit 4.0 ppm; highest yearly average 2.0 ppm

Highest yearly average, 2020 to 2025 · Forms or is added in treatment

Averaged by year, the highest was 2.0 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.6 ppm, in 2014.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 2.5 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 2.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 2.5 ppb, in 2020, below EPA’s legal limit of 80 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.4 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead
  • Nitrate

Violations since 2016

1 health-based violation since 2016 for the Revised Total Coliform Rule. It began Nov. 1, 2016.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Revised Total Coliform RuleColiform or E. coli results required a detailed review of the system, and it or its fixes were not done on time.EPA: Treatment Technique, Level 2 Assessment (RTCR)Nov. 1, 2016Resolved

Health-based violations only. 9 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Fluoride, total trihalomethanes (TTHM), arsenic, chromium (total), haloacetic acids (HAA5) and nitrate results here are Virginia’s own from 2020 on, with EPA’s national file for 2012 to 2019. Bedford Hills’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Virginia’s results run from Aug. 26, 2020 to Sept. 28, 2026.

Testing your own tap

Bedford Hills’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Virginia certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Bedford Hills’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
Labs Virginia certifies, or a kit by mail

No lab Virginia certifies is within 75 miles of the area Bedford Hills serves on the state’s list. Some take samples by mail; the state’s page lists them all.

All 145 certified labs for Virginia⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Virginia certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Virginia’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID VA2003150. Rebuilt from EPA data on Oct. 25, 2026.