Skip to content
TapBuff

Bartlick/Breaks - Dcpsa

EPA’s and Virginia’s records have results for 3 contaminants in its water; 3 were found.

Serves 335 people · Surface water bought from another system · Clintwood, VA

Serves
335 people
Connections
129
Water source
Surface water bought from another system
Based in
Clintwood, VA
County
Dickenson
Owner
Local government
The ZIP code it serves

24256

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 1999.

Haloacetic acids (HAA5) and total trihalomethanes (TTHM): Virginia’s own results, samples taken from March 11, 2020 to Sept. 14, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 3 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 52.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 40 ppb · Forms or is added in treatment

Averaged by year, the highest was 52.3 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 99.5 ppb. In 2026, the latest year on file, its three samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 45.8 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 60.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 38.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 60.3 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 98 ppb. In 2026, the latest year on file, its three samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 68.8 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Lead, Action level 15 ppb · health goal zero; 90th percentile 5.0 ppb

90th percentile, 1999 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 5.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are Virginia’s own from 2020 on, with EPA’s national file for 2012 to 2019. Bartlick/Breaks - Dcpsa’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Virginia’s results run from March 11, 2020 to Sept. 14, 2026.

Testing your own tap

Bartlick/Breaks - Dcpsa’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Virginia certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Bartlick/Breaks - Dcpsa’s latest lead sampling in EPA’s records, 1999, had a 90th percentile of 5.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Virginia certifies closest to the area Bartlick/Breaks - Dcpsa serves, or a kit by mail

The 3 labs Virginia certifies closest to the area Bartlick/Breaks - Dcpsa serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Pace Analytical Services, LLC - Kentucky - Pikeville

    Pikeville, KY · about 24 miles

    Certified for bacteria, nitrate

    (270) 824-2229

  • The Town of Lebanon Water - Wastewater Laboratory

    Lebanon, VA · about 26 miles

    Certified for bacteria

    (276) 889-7206

  • Environmental Monitoring, Inc.

    Norton, VA · about 27 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (276) 679-6544

All 145 certified labs for Virginia⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Virginia certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Virginia’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID VA1051107. Rebuilt from EPA data on Oct. 25, 2026.