Saratoga Springs City
EPA’s and Utah’s records have results for 37 contaminants in its water; 8 were found.
Serves 68,000 people · Surface water bought from another system · Saratoga Springs, UT · Hardness: very hard
- Serves
- 68,000 people
- Connections
- 17,571
- Water source
- Surface water bought from another system
- Based in
- Saratoga Springs, UT
- County
- Utah
- Owner
- Local government
- Hardness
- Very hard
The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 2 health-based violations since 2016, both resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
Filters for arsenic and lead, if you want them lowerThe 2 violationsGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Sept. 24, 2024 to Aug. 5, 2025.
Lead and copper: EPA SDWIS monitoring periods ending 2008 to 2024.
Arsenic, nitrate, fluoride and chromium (total): Utah’s own results, samples taken from Dec. 2, 2020 to June 29, 2026, with EPA’s 2012 to 2019 file for earlier years.
Total trihalomethanes (TTHM) and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from Feb. 18, 2016 to Nov. 7, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
33.8 ppb
Highest sample, Sept. 24, 2024; found in 6 of 12
The highest sample was 33.8 ppb, about 3.4 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 7 results
Arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.9 ppb
Highest yearly average, 2022 to 2025 · 2025 average: 2.8 ppb · Comes from the source
Averaged by year, the highest was 2.9 ppb, in 2024, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 3.7 ppb. In 2025, the latest year on file, its three samples averaged below the limit. One result, 103 ppb on Dec. 29, 2022 in Utah’s results, is left out as a likely entry error: the typical result there is 2.5 ppb.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 3.2 ppb, in 2018.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Nitrate, Legal limit 10 ppm; highest 1.4 ppm
Highest sample; found in 21 of 30 · 2026 average: 0.47 ppm · Comes from the source
The highest sample, in 2023, was 1.4 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.73 ppm, in 2018.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.7 ppb
90th percentile, 2022 to 2024 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 1.7 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.21 ppm
Highest yearly average, 2022 to 2025 · 2025 average: 0.15 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.21 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.26 ppm. In 2025, the latest year on file, its three samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.26 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Chromium (total), Legal limit 100 ppb; highest yearly average 4.6 ppb
Highest yearly average, 2022 to 2025 · 2025: not found · Comes from the source
Averaged by year, the highest was 4.6 ppb, in 2022, below EPA’s legal limit of 100 ppb. Its highest single sample was 18.3 ppb. In 2025, the latest year on file, it wasn’t found in any of its three samples.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.0 ppb, in 2013.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 2.5 ppb
Highest yearly average, 2016 to 2019 · Forms or is added in treatment
Averaged by year, the highest was 2.5 ppb, in 2019, below EPA’s legal limit of 80 ppb. Its highest single sample was 28.2 ppb. That was also the latest year on file.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.2 ppb
Highest yearly average, 2016 to 2019 · Forms or is added in treatment
Averaged by year, the highest was 1.2 ppb, in 2019, below EPA’s legal limit of 60 ppb. Its highest single sample was 14.7 ppb. That was also the latest year on file.
What handles it
No certification claim covers this compound yet.
29 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
2 health-based violations since 2016, 1 for the Groundwater Rule and 1 for the Revised Total Coliform Rule. The latest began July 1, 2018.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Groundwater Rule | A significant problem found in a state inspection was not fixed on time.EPA: Failure To Address Deficiency | July 1, 2018 | Resolved |
| Revised Total Coliform Rule | Coliform results required a check of the system, and the check or its fixes were not done on time.EPA: Treatment Technique, Level 1 Assessment (RTCR) | Aug. 29, 2016 | Resolved |
Health-based violations only. 3 monitoring or reporting violations not shown.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction
For: Arsenic, Lead
Other claims that cover it: Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction
For: Arsenic, Lead
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for: Arsenic, Lead
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Arsenic, Lead
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for: Arsenic, Lead
2 more filters
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Arsenic, Lead
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: Lead
Every filter for these, those that cover both first
Hardness
Very hard, typically 282 mg/L (16.5 grains per gallon), across 3 sampling points, 2021 to 2024.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Saratoga Springs City reported chlorine, not chloramine, at 3 of its 5 sampling points, and no disinfectant at 2, in its 2024 to 2025 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Arsenic, nitrate, fluoride and chromium (total) results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) come from EPA’s file alone, which ends in 2019. Saratoga Springs City’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Sept. 24, 2024 to Aug. 5, 2025; Utah’s results run from Dec. 2, 2020 to June 29, 2026; EPA’s compliance samples are from Feb. 18, 2016 to Nov. 7, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Saratoga Springs City’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 1.7 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Saratoga Springs City’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Utah certifies closest to the area Saratoga Springs City serves, or a kit by mail
The 3 labs Utah certifies closest to the area Saratoga Springs City serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Jordan Valley Laboratory
Herriman, UT · about 8 miles
Certified for bacteria, nitrate, minerals and other inorganics, disinfection byproducts
Chemtech-Ford, Inc.
Sandy, UT · about 14 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, PFAS, radioactivity
Provo Water Resources Laboratory
Provo, UT · about 17 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Utah certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Utah’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportSaratoga Springs City must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Utah Department of Environmental Quality, Division of Drinking Water, results from Jan. 3, 2020 to Oct. 1, 2026, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Utah Department of Environmental Quality, Division of Drinking Water, certified laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Utah Department of Environmental Quality, Division of Drinking Water, results from Dec. 14, 2021 to Aug. 28, 2024, read Oct. 10, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID UTAH25138. Rebuilt from EPA data on Oct. 25, 2026.