Skip to content
TapBuff

Cedar Valley Water Conservancy

EPA’s and Utah’s records have results for 7 contaminants in its water; 5 were found.

Serves 3,995 people · Groundwater · Cedar City, UT · Hardness: very hard

Serves
3,995 people
Connections
733
Water source
Groundwater
Based in
Cedar City, UT
County
Iron
Owner
Local government
Hardness
Very hard
The 2 ZIP codes it serves

84720, 84721

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

Filters for arsenic and lead, if you want them lower⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2007 to 2026.

Arsenic, nitrate, fluoride and chromium (total): Utah’s own results, samples taken from Jan. 13, 2020 to Aug. 3, 2026, with EPA’s 2012 to 2019 file for earlier years.

Total trihalomethanes (TTHM) and haloacetic acids (HAA5): EPA’s compliance monitoring file, samples taken from Sept. 28, 2013 to July 15, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 5 results

Arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 3.0 ppb

Highest yearly average, 2022 to 2026 · 2026, one sample: 2.7 ppb · Comes from the source

Averaged by year, the highest was 3.0 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 4.4 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.1 ppb, in 2019.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Nitrate, Legal limit 10 ppm; highest 2.1 ppm

Highest sample; found in 28 of 41 · 2026 average: 0.59 ppm · Comes from the source

The highest sample, in 2022, was 2.1 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.4 ppm, in 2017.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 12.3 ppb

Highest yearly average, 2013 to 2019 · 2019: not found · Forms or is added in treatment

Averaged by year, the highest was 12.3 ppb, in 2013, below EPA’s legal limit of 80 ppb. In 2019, the latest year on file, it wasn’t found in its one sample.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.26 ppm

Highest yearly average, 2022 to 2026 · 2026, one sample: 0.14 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.26 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.37 ppm. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.3 ppm, in 2013.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.18 ppb

90th percentile, 2024 to 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.18 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
2 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Haloacetic acids (HAA5)

Violations since 2016

No health-based violations on file with EPA since 2016. There are 210 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Hardness

Very hard, typically 454 mg/L (26.5 grains per gallon), across 3 sampling points, 2017 to 2026.

Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.

What this report can’t tell you

  • Everything else. Arsenic, nitrate, fluoride and chromium (total) results here are Utah’s own from 2020 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM) and haloacetic acids (HAA5) come from EPA’s file alone, which ends in 2019. Cedar Valley Water Conservancy’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Utah’s results run from Jan. 13, 2020 to Aug. 3, 2026; EPA’s compliance samples are from Sept. 28, 2013 to July 15, 2019.

Testing your own tap

Cedar Valley Water Conservancy’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Utah certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Cedar Valley Water Conservancy’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0.18 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Utah certifies closest to the area Cedar Valley Water Conservancy serves, or a kit by mail

The 3 labs Utah certifies closest to the area Cedar Valley Water Conservancy serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Southern Utah University Water Laboratory

    Cedar City, UT · about 4 miles

    Certified for nitrate, lead and copper, metals, minerals and other inorganics

    (435) 586-7914

  • Southwest Utah Public Health Laboratory

    St. George, UT · about 47 miles

    Certified for bacteria, nitrate

    (435) 986-2598

  • St. George RWRF Laboratory

    St. George, UT · about 51 miles

    Certified for bacteria

    (435) 627-4269

All 60 certified labs for Utah⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Utah certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Utah’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID UTAH11085. Rebuilt from EPA data on Oct. 25, 2026.