Sunset Hills Subdivision
What EPA’s and Texas’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.
- Serves
- 324 people
- Connections
- 108
- Water source
- Groundwater
- Based in
- Marble Falls, TX
- County
- Burnet
- Owner
- Private
The ZIP code it serves
The short answer
Nothing in EPA’s and Texas’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.
What was found
Nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic, chromium (total) and uranium: Texas’s own results, samples taken from May 6, 2020 to Sept. 16, 2025, with EPA’s 2012 to 2019 file for earlier years.
Below EPA’s limits4
Nitrate
Comes from the source
5.5ppm
Highest sample; found in 19 of 19
2025 average: 4.3 ppm
The highest sample, in 2021, was 5.5 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its two samples averaged 4.3 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 5.1 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Total trihalomethanes (TTHM)
Forms or is added in treatment
12.4ppb
Highest yearly average, 2022 to 2025
Averaged by year, the highest was 12.4 ppb, in 2025, below EPA’s legal limit of 80 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 14.4 ppb, in 2013.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride
Forms or is added in treatment
0.28ppm
Highest yearly average, 2021 to 2024
2024 average: 0.26 ppm
Averaged by year, the highest was 0.28 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.32 ppm. In 2024, the latest year on file, its two samples averaged 0.26 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.33 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Haloacetic acids (HAA5)
Forms or is added in treatment
3.3ppb
Highest yearly average, 2022 to 2025
Averaged by year, the highest was 3.3 ppb, in 2025, below EPA’s legal limit of 60 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 8.7 ppb, in 2016.
What handles it
No certification claim covers this compound yet.
4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Arsenic
- Chromium (total)
- Lead
- Uranium
Violations since 2016
No health-based violations on file with EPA since 2016.
What this report can’t tell you
Everything else. Nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), arsenic, chromium (total) and uranium results here are Texas’s own from 2020 on, with EPA’s national file for 2012 to 2019. Sunset Hills Subdivision’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Texas’s results run from May 6, 2020 to Sept. 16, 2025.
Testing your own tap
The 3 labs Texas certifies closest to the area Sunset Hills Subdivision serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Environmental Monitoring Lab
Llano, TX · about 25 miles
Certified for bacteria
Integrity Testing, Inc.
Austin, TX · about 42 miles
Certified for lead and copper
Texas Department of State Health Services Laboratory Services Section
Austin, TX · about 46 miles
Certified for bacteria, lead and copper
Texas Well Owner Network, Texas A&M AgriLife Extension: Well Informed screening events, where well owners bring in water samples to be screened for common contaminants, followed by an hour-long session explaining the results. Upcoming events are on the network's calendar. Trainings, Texas Well Owner Network.
All 80 certified labs for TexasSources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Texas Commission on Environmental Quality, Texas Drinking Water Viewer, results from Jan. 7, 2020 to Oct. 6, 2026, read Oct. 16, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: TCEQ, drinking water laboratories approved for public water system samples, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID TX0270043. Rebuilt from EPA data on Oct. 18, 2026.
What to do next
- Nothing here is above a health goalIn EPA’s and Texas’s records for this utility. They don’t cover everything, which is why the next step matters.Every contaminant TapBuff tracks
- Get the utility’s own reportSunset Hills Subdivision must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded