Kaufman County FWSD 1d
EPA’s and Texas’s records have results for 3 contaminants in its water; 3 were found.
In the name, FWSD means fresh water supply district.
Serves 3,324 people · Surface water bought from another system · Dallas, TX
- Serves
- 3,324 people
- Connections
- 1,108
- Water source
- Surface water bought from another system
- Based in
- Dallas, TX
- County
- Kaufman
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, not everything. No health-based violations on file since 2016.
What was found
Where these results come from, and when
Total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate: Texas’s own results, samples taken from March 19 to Sept. 9, 2026.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
Below EPA’s limits, 3 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 51.1 ppb
Highest yearly average, 2026 · Forms or is added in treatment
Averaged by year, the highest was 51.1 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 53 ppb. That is the only year on file.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 25.3 ppb
Highest yearly average, 2026 · Forms or is added in treatment
Averaged by year, the highest was 25.3 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 26.9 ppb. That is the only year on file.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 0.42 ppm
Highest sample; found in 3 of 3 · 2026 average: 0.32 ppm · Comes from the source
The highest sample, in 2026, was 0.42 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its three samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate results here are Texas’s own from 2026 on. Kaufman County FWSD 1d’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Texas’s results run from March 19 to Sept. 9, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. About lead.
Labs Texas certifies, or a kit by mail
No lab Texas certifies is within 75 miles of the area Kaufman County FWSD 1d serves on the state’s list. Some take samples by mail; the state’s page lists them all.
All 80 certified labs for TexasOr test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Texas certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Texas’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportKaufman County FWSD 1d must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Texas Commission on Environmental Quality, Texas Drinking Water Viewer, results from Jan. 7, 2020 to Oct. 6, 2026, read Oct. 16, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID TX1290060. Rebuilt from EPA data on Oct. 25, 2026.