Skip to content
TapBuff

Harris County WCID 1

EPA’s and Texas’s records have results for 38 contaminants in its water; 11 were found.

In the name, WCID means water control and improvement district.

Serves 8,559 people · Surface water bought from another system · Highlands, TX

Serves
8,559 people
Connections
2,853
Water source
Surface water bought from another system
Based in
Highlands, TX
County
Harris
Owner
Local government
The ZIP code it serves

77562

The short answer

None of the results here is above a limit in force today. PFOS had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 17 to Oct. 9, 2024.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, arsenic, chromium (total) and uranium: Texas’s own results, samples taken from Jan. 21, 2020 to Aug. 14, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFPeA at 9.5 ppt: see them below.

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOS

Comes from the source

A sample above EPA’s 2029 limit

5.5 ppt

Highest sample, Jan. 17, 2024; found in 1 of 8

The highest sample was 5.5 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 1.4 ppt, below it.

What handles it

Below EPA’s limits, 7 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 11.2 ppb

Highest sample, July 17, 2024; found in 3 of 8 · Comes from the source

The highest sample was 11.2 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 39.8 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 7.7 ppb · Forms or is added in treatment

Averaged by year, the highest was 39.8 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 76.7 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 37.5 ppb, in 2015.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 44 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 15.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 44 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 72.2 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 43.7 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
PFHxS, EPA’s 2029 limit 10 ppt; highest 4.3 ppt

Highest sample, Jan. 17, 2024; found in 1 of 8 · Comes from the source

The highest sample was 4.3 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.7 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 0.69 ppm · Forms or is added in treatment

Averaged by year, the highest was 0.7 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.74 ppm. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.75 ppm, in 2017.

What handles it

About fluoride
Nitrate, Legal limit 10 ppm; highest 0.6 ppm

Highest sample; found in 5 of 19 · 2026: not found · Comes from the source

The highest sample, in 2024, was 0.6 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.84 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
PFBS, Health benchmark 2,000 ppt; highest 4.3 ppt

Highest sample, Jan. 17, 2024; found in 1 of 8 · Comes from the source

The highest sample was 4.3 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 8 samples, below 4 ppt
PFOS4.0 pptA sample above EPA’s 2029 limit5.5 ppt highest, found in 1 of 8 samples. Details
PFHxS10 pptBelow EPA’s limits4.3 ppt highest, found in 1 of 8 samples. Details
PFNA10 pptNot foundNot found in any of 8 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 8 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits4.3 ppt highest, found in 1 of 8 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits0.11 at its highest sampling location, END OF BATTLEBELL RD
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Texas utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA9.5 ppt2 of 8None covers it
PFHxA8.6 ppt3 of 8None covers it
PFBA7.4 ppt3 of 8None covers it
27 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claim: PFOS Reduction

    For: PFOS

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claim: Perfluorooctane Sulfonate (PFOS)

    For: PFOS

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

Disinfectant

Harris County WCID 1 reported adding chloramine before water enters its pipes, at all 3 of its sampling points, in its 2024 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), fluoride, nitrate, arsenic, chromium (total) and uranium results here are Texas’s own from 2020 on, with EPA’s national file for 2012 to 2019. Harris County WCID 1’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 17 to Oct. 9, 2024; Texas’s results run from Jan. 21, 2020 to Aug. 14, 2026.

Testing your own tap

Harris County WCID 1’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Texas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Harris County WCID 1’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Harris County WCID 1’s results flag: PFOS. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Texas certifies closest to the area Harris County WCID 1 serves, or a kit by mail

The 3 labs Texas certifies closest to the area Harris County WCID 1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • A & B Environmental Services, Inc.

    Houston, TX · about 13 miles

    Certified for bacteria, lead and copper

    (713) 453-6060

  • City of Houston Health Department, Bureau of Laboratory Services

    Houston, TX · about 23 miles

    Certified for bacteria

    (832) 393-3939

  • Water Utility Services, Inc.

    Spring, TX · about 30 miles

    Certified for bacteria

    (281) 290-0704

All 80 certified labs for Texas⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Texas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Texas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID TX1010159. Rebuilt from EPA data on Oct. 25, 2026.