Skip to content
TapBuff

Harris County MUD 400 East

EPA’s and Texas’s records have results for 4 contaminants in its water; 3 were found.

In the name, MUD means municipal utility district.

Serves 6,066 people · Surface water bought from another system · Houston, TX

Serves
6,066 people
Connections
2,022
Water source
Surface water bought from another system
Based in
Houston, TX
County
Harris
Owner
Local government
The 2 ZIP codes it serves

77346, 77396

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

What was found

Where these results come from, and when

Haloacetic acids (HAA5), total trihalomethanes (TTHM) and nitrate: Texas’s own results, samples taken from Feb. 13, 2020 to Sept. 24, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 3 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 18 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 4.5 ppb · Forms or is added in treatment

Averaged by year, the highest was 18 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 27.2 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 23.1 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 13.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 6.2 ppb · Forms or is added in treatment

Averaged by year, the highest was 13.6 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 20.8 ppb. In 2026, the latest year on file, its two samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 6.8 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Nitrate, Legal limit 10 ppm; highest 1.2 ppm

Highest sample; found in 25 of 27 · 2026 average: 0.44 ppm · Comes from the source

The highest sample, in 2020, was 1.2 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its three samples averaged below the limit.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
One compound tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Lead

Violations since 2016

No health-based violations on file with EPA since 2016. There are 4 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM) and nitrate results here are Texas’s own from 2020 on, with EPA’s national file for 2012 to 2019. Harris County MUD 400 East’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Texas’s results run from Feb. 13, 2020 to Sept. 24, 2026.

Testing your own tap

Harris County MUD 400 East’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Texas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Harris County MUD 400 East’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Texas certifies closest to the area Harris County MUD 400 East serves, or a kit by mail

The 3 labs Texas certifies closest to the area Harris County MUD 400 East serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • A & B Environmental Services, Inc.

    Houston, TX · about 15 miles

    Certified for bacteria, lead and copper

    (713) 453-6060

  • Water Utility Services, Inc.

    Spring, TX · about 16 miles

    Certified for bacteria

    (281) 290-0704

  • City of Houston Health Department, Bureau of Laboratory Services

    Houston, TX · about 21 miles

    Certified for bacteria

    (832) 393-3939

All 80 certified labs for Texas⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Texas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Texas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID TX1013416. Rebuilt from EPA data on Oct. 25, 2026.