City of San Marcos
EPA’s and Texas’s records have results for 38 contaminants in its water; 9 were found.
Serves 72,970 people · Surface water · San Marcos, TX
- Serves
- 72,970 people
- Connections
- 42,746
- Water source
- Surface water
- Based in
- San Marcos, TX
- County
- Hays
- Owner
- Local government
The short answer
EPA recorded a violation of the legal limit for total trihalomethanes (TTHM) here in 2025. In 2026, the latest year on file, it averaged 47.8 ppb, below the limit. 2 health-based violations since 2016, both resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What handles itThe 2 violationsGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Nov. 14, 2023 to Aug. 15, 2024.
Lead and copper: EPA SDWIS monitoring periods ending 2007 to 2024.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, arsenic, chromium (total) and uranium: Texas’s own results, samples taken from Jan. 29, 2020 to July 1, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: PFHxS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Two other PFAS with no federal limit were found, the highest PFBA at 11.4 ppt: see them below.
About PFAS certifications
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
A legal-limit violation on record, below the limit in the latest year, 1 result
Total trihalomethanes (TTHM)
Forms or is added in treatment
What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.
53.4 ppb
Highest yearly average, 2020 to 2026
2026 average: 47.8 ppb
Averaged by year, the highest was 53.4 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 94.5 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit. EPA recorded a violation for total trihalomethanes (TTHM) at this utility in 2025.
How it’s judged
EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 55.6 ppb, in 2013, and EPA recorded violations in 2013, 2014 and 2016.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Below EPA’s limits, 6 results
Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 11.3 ppb
Highest sample, May 21, 2024; found in 5 of 26 · Comes from the source
The highest sample was 11.3 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportPFHxS, EPA’s 2029 limit 10 ppt; highest 3.4 ppt
Highest sample, May 21, 2024; found in 3 of 26 · Comes from the source
The highest sample was 3.4 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 18.5 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 15.2 ppb · Forms or is added in treatment
Averaged by year, the highest was 18.5 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 53.3 ppb. In 2026, the latest year on file, its 24 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 32.7 ppb, in 2013.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 2.0 ppm
Highest sample; found in 43 of 43 · 2026 average: 1.4 ppm · Comes from the source
The highest sample, in 2021, was 2.0 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 2.6 ppm, in 2016.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.6 ppb
90th percentile, 2022 to 2024 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 1.6 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.21 ppm
Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment
Averaged by year, the highest was 0.21 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.22 ppm. In 2026, the latest year on file, it wasn’t found in any of its five samples.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.63 ppm, in 2015.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Not foundNot found in any of 26 samples, below 4 ppt |
| PFOS | 4.0 ppt | Not foundNot found in any of 26 samples, below 4 ppt |
| PFHxS | 10 ppt | Below EPA’s limits3.4 ppt highest, found in 3 of 26 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 26 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 26 samples, below 5 ppt |
| PFBS | Index only | Not foundNot found in any of 26 samples, below 3 ppt |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Doesn’t applyDoesn’t apply: no sampling location found two or more of the four |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFBA | 11.4 ppt | 2 of 26 | None covers it |
| PFPeA | 4.2 ppt | 6 of 26 | None covers it |
29 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Uranium
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Trihalomethanes (TTHM) Reduction, Lead Reduction
For: Total trihalomethanes (TTHM), Lead
Other claims that cover it: VOC Reduction
- NSF/ANSI 58
Claims: Trihalomethanes (TTHM) Reduction, Lead Reduction
For: Total trihalomethanes (TTHM), Lead
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
2 more filters
Brita Elite Water Filter Faucet System (SAFF-100/FF-100)
Faucet mount
Five years: $1,004, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
Every filter certified for it
Disinfectant
City of San Marcos reported disinfecting with chlorine, not chloramine, at all 7 of its sampling points, in its 2023 to 2024 sampling for EPA. It also reported chlorine dioxide and permanganate.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
2 health-based violations since 2016, all for TTHM. The latest began Oct. 1, 2025.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Oct. 1, 2025 to Dec. 31, 2025, 81 ppb | Resolved |
| Jan. 1, 2016 to March 31, 2016, 82 ppb | Resolved |
Health-based violations only. 2 monitoring or reporting violations not shown.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, arsenic, chromium (total) and uranium results here are Texas’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of San Marcos’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Nov. 14, 2023 to Aug. 15, 2024; Texas’s results run from Jan. 29, 2020 to July 1, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of San Marcos’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 1.6 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What City of San Marcos’s results flag: total trihalomethanes (TTHM). It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Texas certifies closest to the area City of San Marcos serves, or a kit by mail
The 3 labs Texas certifies closest to the area City of San Marcos serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Edwards Aquifer Research & Data Center, Texas State University
San Marcos, TX · under a mile
Certified for bacteria
Aqua-Tech Laboratories, Inc.
Austin, TX · about 25 miles
Certified for bacteria, lead and copper
Wallgren Environmental Services dba Pollution Control Services
Universal City, TX · about 31 miles
Certified for bacteria, lead and copper
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Texas certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Texas’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on total trihalomethanes (TTHM)What it does to health, where it comes from, and the certification claim that addresses it.About total trihalomethanes (TTHM)
- Get the utility’s own reportCity of San Marcos must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Texas Commission on Environmental Quality, Texas Drinking Water Viewer, results from Jan. 7, 2020 to Oct. 6, 2026, read Oct. 16, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: TCEQ, drinking water laboratories approved for public water system samples, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID TX1050001. Rebuilt from EPA data on Oct. 25, 2026.