Skip to content
TapBuff

City of Robinson

EPA’s and Texas’s records have results for 38 contaminants in its water; 11 were found.

Serves 11,900 people · Surface water · Robinson, TX

Serves
11,900 people
Connections
5,238
Water source
Surface water
Based in
Robinson, TX
County
McLennan
Owner
Local government
The 2 ZIP codes it serves

76655, 76706

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from July 12, 2023 to April 2, 2024.

Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, chromium (total), arsenic and uranium: Texas’s own results, samples taken from March 2, 2020 to July 20, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Three other PFAS with no federal limit were found, the highest PFBA at 6.3 ppt: see them below.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

105 ppb

Highest sample, Aug. 7, 2023; found in 14 of 14

The highest sample was 105 ppb, about 11 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 7 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Fluoride, Legal limit 4.0 ppm; highest yearly average 1.4 ppm

Highest yearly average, 2020 to 2026 · 2026 average: 1.4 ppm · Forms or is added in treatment

Averaged by year, the highest was 1.4 ppm, in 2020, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 2.4 ppm. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.6 ppm, in 2013.

What handles it

About fluoride
PFHxS, EPA’s 2029 limit 10 ppt; highest 3.5 ppt

Highest sample, April 2, 2024; found in 3 of 14 · Comes from the source

The highest sample was 3.5 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 26.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 10.6 ppb · Forms or is added in treatment

Averaged by year, the highest was 26.7 ppb, in 2023, below EPA’s legal limit of 80 ppb. Its highest single sample was 107 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 44.1 ppb, in 2018, and EPA recorded a violation in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 6.3 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 3.0 ppb · Forms or is added in treatment

Averaged by year, the highest was 6.3 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 29.9 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.4 ppb, in 2013.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 1.0 ppm

Highest sample; found in 27 of 68 · 2026 average: 0.028 ppm · Comes from the source

The highest sample, in 2024, was 1.0 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its nine samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.91 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 5.4 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 5.4 ppb, in 2022, below EPA’s legal limit of 100 ppb. Its highest single sample was 11 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppb, in 2013.

What handles it

About chromium (total)
PFBS, Health benchmark 2,000 ppt; highest 3.2 ppt

Highest sample, April 2, 2024; found in 2 of 14 · Comes from the source

The highest sample was 3.2 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 14 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 14 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits3.5 ppt highest, found in 3 of 14 samples. Details
PFNA10 pptNot foundNot found in any of 14 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 14 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.2 ppt highest, found in 2 of 14 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Below EPA’s limits0.25 at its highest sampling location, Robinson RO Plant
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Texas utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA6.3 ppt3 of 14None covers it
PFPeA3.4 ppt2 of 14None covers it
PFHxA3.2 ppt2 of 14None covers it
27 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

1 health-based violation since 2016 for TTHM. It began Oct. 1, 2018.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
TTHMThe running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2018 to Dec. 31, 2018, 92 ppbResolved

Health-based violations only. 1 monitoring or reporting violation not shown.

Disinfectant

City of Robinson reported adding chloramine before water enters its pipes, at all 6 of its sampling points, in its 2023 to 2024 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, chromium (total), arsenic and uranium results here are Texas’s own from 2020 on, with EPA’s national file for 2012 to 2019. City of Robinson’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from July 12, 2023 to April 2, 2024; Texas’s results run from March 2, 2020 to July 20, 2026.

Testing your own tap

City of Robinson’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Texas certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. City of Robinson’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What City of Robinson’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Texas certifies closest to the area City of Robinson serves, or a kit by mail

The 3 labs Texas certifies closest to the area City of Robinson serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Bio-Chem Lab, Inc.

    West, TX · about 23 miles

    Certified for bacteria, lead and copper

    (254) 829-8001

  • Environmental Monitoring Lab

    Hillsboro, TX · about 40 miles

    Certified for bacteria

    (254) 582-2622

  • Aqua-Tech Laboratories, Inc.

    Bryan, TX · about 65 miles

    Certified for bacteria, lead and copper

    (979) 778-3707

All 80 certified labs for Texas⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Texas certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Texas’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID TX1550010. Rebuilt from EPA data on Oct. 25, 2026.