439 WSC
EPA’s and Texas’s records have results for 34 contaminants in its water; 10 were found.
In the name, WSC means water supply corporation.
Serves 7,836 people · Surface water bought from another system · Belton, TX
- Serves
- 7,836 people
- Connections
- 2,612
- Water source
- Surface water bought from another system
- Based in
- Belton, TX
- County
- Bell
- Owner
- Local government
The short answer
None of the results here is above a limit in force today. PFOS and PFHxS had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. 7 health-based violations since 2016, all resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What handles itThe 7 violationsGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Jan. 16, 2023 to April 23, 2025.
Total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate: Texas’s own results, samples taken from Feb. 7, 2020 to July 29, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
PFAS: PFOS, PFHxS and PFBS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFHxA at 11 ppt: see them below.
A sample above EPA’s 2029 limit, below it on average, 2 results
PFOS
Comes from the source
13.7 ppt
Highest sample, Oct. 17, 2023; found in 1 of 12
The highest sample was 13.7 ppt, about 3.4 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 3.4 ppt, below it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
PFHxS
Comes from the source
16.4 ppt
Highest sample, Oct. 17, 2023; found in 7 of 12
The highest sample was 16.4 ppt, above EPA’s new limit of 10 ppt, which takes effect in 2029. EPA’s health goal is 10 ppt. Averaged at each sampling location, the way EPA will judge it, it is below the limit.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 6.3 ppt, below it.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Below EPA’s limits, 4 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health benchmark:
- A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 39.3 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 28.3 ppb · Forms or is added in treatment
Averaged by year, the highest was 39.3 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 67.7 ppb. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 74 ppb, in 2016, and EPA recorded violations in 2016 and 2017.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 18.6 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 13.7 ppb · Forms or is added in treatment
Averaged by year, the highest was 18.6 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 45.8 ppb. In 2026, the latest year on file, its six samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 57.3 ppb, in 2016, and EPA recorded violations in 2016 and 2017.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 0.76 ppm
Highest sample; found in 26 of 28 · 2026 average: 0.34 ppm · Comes from the source
The highest sample, in 2024, was 0.76 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its four samples averaged below the limit.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
PFBS, Health benchmark 2,000 ppt; highest 4.7 ppt
Highest sample, Oct. 17, 2023; found in 5 of 12 · Comes from the source
The highest sample was 4.7 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Not foundNot found in any of 12 samples, below 4 ppt |
| PFOS | 4.0 ppt | A sample above EPA’s 2029 limit13.7 ppt highest, found in 1 of 12 samples. Details |
| PFHxS | 10 ppt | A sample above EPA’s 2029 limit16.4 ppt highest, found in 7 of 12 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 12 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 12 samples, below 5 ppt |
| PFBS | Index only | Below EPA’s limits4.7 ppt highest, found in 5 of 12 samples. Details |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Below EPA’s limits0.63 at its highest sampling location, 439 WSC Pump Station 1 |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFHxA | 11 ppt | 1 of 12 | None covers it |
| PFBA | 10.7 ppt | 7 of 12 | None covers it |
| PFPeA | 10 ppt | 4 of 12 | None covers it |
| PFHpA | 5.4 ppt | 1 of 12 | NSF/ANSI 53: Total PFAS Reduction |
24 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFDA
- PFDoA
- PFEESA
- PFHpS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.
- NSF/ANSI 53
Claims: PFOS Reduction, Total PFAS Reduction
For: PFOS, PFHxS
Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)
Other claims that cover it: Perfluorohexane Sulfonic Acid (PFHxS)
- NSF/ANSI 58
Claim: Perfluorooctane Sulfonate (PFOS)
For: PFOS
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink carbon
Five years: $1,090, household of 3, cartridges included
Certified for: PFOS, PFHxS
Ninja HydraSense Countertop Water Filtration System (WF1001)
Countertop
Five years: $2,050, household of 3, cartridges included
Certified for: PFOS, PFHxS
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: PFOS, PFHxS
2 more filters
Culligan MaxClear Scout Gravity Water Filter (MCS701P)
Dispenser
Five years: $8,840, household of 3, cartridges included
Certified for: PFOS, PFHxS
Whole house
Five years: not totaled; a part has no published price
Certified for: PFOS, PFHxS
Disinfectant
439 WSC reported adding chloramine before water enters its pipes, at all 3 of its sampling points, in its 2023 to 2025 sampling for EPA.
What that means
Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
7 health-based violations since 2016, 4 for total Haloacetic Acids (HAA5) and 3 for TTHM. The latest began July 1, 2017.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Total Haloacetic Acids (HAA5) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | July 1, 2017 to Sept. 30, 2017, 62 ppb | Resolved |
| April 1, 2017 to June 30, 2017, 76 ppb | Resolved | ||
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | April 1, 2017 to June 30, 2017, 91 ppb | Resolved |
| Total Haloacetic Acids (HAA5) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Jan. 1, 2017 to March 31, 2017, 78 ppb | Resolved |
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Jan. 1, 2017 to March 31, 2017, 93 ppb | Resolved |
The other 2, back to 2016
| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Total Haloacetic Acids (HAA5) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Oct. 1, 2016 to Dec. 31, 2016, 81 ppb | Resolved |
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Oct. 1, 2016 to Dec. 31, 2016, 96 ppb | Resolved |
Health-based violations only. 8 monitoring or reporting violations not shown.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate results here are Texas’s own from 2020 on, with EPA’s national file for 2012 to 2019. 439 WSC’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 16, 2023 to April 23, 2025; Texas’s results run from Feb. 7, 2020 to July 29, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. 439 WSC’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What 439 WSC’s results flag: PFOS and PFHxS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs Texas certifies closest to the area 439 WSC serves, or a kit by mail
The 3 labs Texas certifies closest to the area 439 WSC serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Integrity Testing, Inc.
Austin, TX · about 48 miles
Certified for lead and copper
Texas Department of State Health Services Laboratory Services Section
Austin, TX · about 53 miles
Certified for bacteria, lead and copper
Bio-Chem Lab, Inc.
West, TX · about 56 miles
Certified for bacteria, lead and copper
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Texas certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Texas’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 2 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with PFOS
- Get the utility’s own report439 WSC must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Texas Commission on Environmental Quality, Texas Drinking Water Viewer, results from Jan. 7, 2020 to Oct. 6, 2026, read Oct. 16, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: TCEQ, drinking water laboratories approved for public water system samples, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID TX0140076. Rebuilt from EPA data on Oct. 25, 2026.