Skip to content
TapBuff

Rapid City

EPA’s and South Dakota’s records have results for 38 contaminants in its water; 7 were found.

Serves 72,009 people · Surface water · Rapid City, SD

Serves
72,009 people
Connections
23,171
Water source
Surface water
Based in
Rapid City, SD
County
Pennington
Owner
Local government
The 3 ZIP codes it serves

57701, 57702, 57703

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for arsenic and lead, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Aug. 29, 2024 to Sept. 3, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2003 to 2024.

Arsenic, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5) and nitrate: the annual water quality reports South Dakota writes for each utility, 2021 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total) and uranium: EPA’s compliance monitoring file, samples taken from May 24, 2012 to March 21, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFHxS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. None of the other 23 PFAS tested for was found.

About PFAS certifications

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 10 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Below EPA’s limits, 7 results

Arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest 7.0 ppb

Highest result, 2021 · Comes from the source

The highest sample, in 2021, was 7.0 ppb, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.1 ppb, in 2012.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
PFHxS, EPA’s 2029 limit 10 ppt; highest 5.6 ppt

Highest sample, June 23, 2025; found in 2 of 20 · Comes from the source

The highest sample was 5.6 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.

What handles it

About PFHxS
Lead, Action level 15 ppb · health goal zero; 90th percentile 6.0 ppb

90th percentile, 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 6.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 15.3 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 15.3 ppb, in 2025, below EPA’s legal limit of 80 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 20.8 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest 0.73 ppm

Highest result, 2025 · Forms or is added in treatment

The highest sample, in 2025, was 0.73 ppm, below EPA’s legal limit of 4.0 ppm.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 4.7 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 4.7 ppb, in 2025, below EPA’s legal limit of 60 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 9.9 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 0.76 ppm

Highest result, 2025 · 2025 average: 0.76 ppm · Comes from the source

The highest sample, in 2025, was 0.76 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 1.7 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 20 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 20 samples, below 4 ppt
PFHxS10 pptBelow EPA’s limits5.6 ppt highest, found in 2 of 20 samples. Details
PFNA10 pptNot foundNot found in any of 20 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 20 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 20 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
Utilities above EPA’s PFAS limits, state by state⁠
31 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

  • NSF/ANSI 53

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: Arsenic, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Rapid City reported disinfecting with chlorine, not chloramine, at all 8 of its sampling points, in its 2024 to 2025 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Arsenic, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5) and nitrate results here are from the annual water quality reports South Dakota writes for each utility, from 2021 on, with EPA’s national file for 2012 to 2019. Chromium (total) and uranium come from EPA’s file alone, which ends in 2019. Rapid City’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Aug. 29, 2024 to Sept. 3, 2025; the reports South Dakota writes cover 2021 to 2025; EPA’s compliance samples are from May 24, 2012 to March 21, 2019.

Testing your own tap

Rapid City’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab South Dakota certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Rapid City’s latest lead sampling in EPA’s records, 2024, had a 90th percentile of 6.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The lab South Dakota certifies closest to the area Rapid City serves, or a kit by mail

The lab South Dakota certifies closest to the area Rapid City serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Mid Continent Testing Laboratory

    Rapid City, SD · under a mile

    Certified for bacteria, minerals and other inorganics, organic chemicals, disinfection byproducts

    (605) 348-0111

All 16 certified labs for South Dakota⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that South Dakota certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against South Dakota’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID SD4600406. Rebuilt from EPA data on Oct. 25, 2026.