Skip to content
TapBuff

Greater Johnstown WA Saltlick

What EPA’s and Pennsylvania’s records show in this utility’s water: PFAS; nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
170 people
Connections
51
Water source
Surface water
Based in
Johnstown, PA
County
Cambria
Owner
Local government
The ZIP code it serves

15541

The short answer

1 result is above EPA’s legal limit. The worst: Haloacetic acids (HAA5), above the legal limit. 4 health-based violations since 2016.

What was found

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from March 6, 2024 to Sept. 9, 2026.

Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, arsenic, chromium (total) and uranium: Pennsylvania’s own results, samples taken from Jan. 15, 2020 to Aug. 19, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples.

EPA’s 2024 PFAS rule, compound by compound

PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 9 samples
PFOS4.0 pptNot foundNot found in any of 9 samples
PFHxS10 pptNot foundNot found in any of 5 samples
PFNA10 pptNot foundNot found in any of 5 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 5 samples
PFBSIndex onlyNot foundNot found in any of 5 samples
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.

Above the legal limit1

Haloacetic acids (HAA5)

Forms or is added in treatment

Above the legal limit

50.3ppb

Highest yearly average, 2020 to 2026

2026 average: 24.4 ppb

Averaged by year, the highest was 50.3 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 82.7 ppb. In 2026, the latest year on file, its four samples averaged 24.4 ppb. EPA judges this limit at each sampling point, and recorded a violation for haloacetic acids (HAA5) at this utility in 2020. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 84.3 ppb, in 2015, and EPA recorded violations in 2013, 2015, 2016 and 2019.

What handles it

No certification claim covers this compound yet.

Below EPA’s limits3

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

37.8ppb

Highest yearly average, 2020 to 2026

2026 average: 28.8 ppb

Averaged by year, the highest was 37.8 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 56.9 ppb. In 2026, the latest year on file, its four samples averaged 28.8 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 77.8 ppb, in 2013, and EPA recorded a violation in 2013.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Nitrate

Comes from the source

Below EPA’s limits

1.1ppm

Highest sample; found in 3 of 5

2026: not found

The highest sample, in 2022, was 1.1 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, it wasn’t found in its one sample. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 2.7 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.029ppm

Highest yearly average, 2020 to 2025

2025: not found

Averaged by year, the highest was 0.029 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.058 ppm. In 2025, the latest year on file, it wasn’t found in any of its two samples. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.73 ppm, in 2015.

What handles it

10 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Lead
  • Uranium

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFBS
  • PFHxS
  • PFNA
  • PFOA
  • PFOS

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2020 to March 31, 20200.069 MG/LResolved
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageOct. 1, 2019 to Dec. 31, 20190.065 MG/LResolved
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageApril 1, 2016 to June 30, 2016—Resolved
Total Haloacetic Acids (HAA5)The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, AverageJan. 1, 2016 to March 31, 2016—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 35 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Haloacetic acids (HAA5), total trihalomethanes (TTHM), nitrate, fluoride, arsenic, chromium (total) and uranium results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Greater Johnstown WA Saltlick’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Pennsylvania’s results run from Jan. 15, 2020 to Aug. 19, 2026; Pennsylvania’s PFAS results run from March 6, 2024 to Sept. 9, 2026.

Testing your own tap

Greater Johnstown WA Saltlick’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

The 3 labs Pennsylvania certifies closest to the area Greater Johnstown WA Saltlick serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Geochemical Testing

    Somerset, PA · about 8 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (814) 443-1671

  • US Micro-Solutions Inc

    Latrobe, PA · about 27 miles

    Certified for bacteria

    (724) 853-4047

  • Chemstream Lab Services

    Homer City, PA · about 34 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, radioactivity

    (724) 915-8388

Penn State Agricultural Analytical Services Laboratory: Drinking water test kits from many county Extension offices, mailed back to the lab overnight with payment. Packages cover bacteria and basic chemistry, with add-ons for nitrate, metals, lead, and mining or gas drilling concerns. The standard package of bacteria, pH and total dissolved solids is $60, or $70 with nitrate; bacteria alone is $40, nitrate $15 and lead $25. Drinking Water Testing, Penn State Agricultural Analytical Services Lab.

All 108 certified labs for Pennsylvania

Sources

PWSID PA4110014. Rebuilt from EPA data on Oct. 18, 2026.