Skip to content
TapBuff
ZIP

Aqua PA Beech Mountain

What EPA’s and Pennsylvania’s records show in this utility’s water: PFAS; nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
2,646 people
Connections
968
Water source
Groundwater
Based in
White Haven, PA
County
Luzerne
Owner
Private
The ZIP code it serves

18222

The short answer

3 results are above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

PFAS: Pennsylvania’s own results under its PFAS rule, entry point samples taken from Feb. 8, 2024 to Aug. 11, 2026.

Lead and copper: EPA SDWIS monitoring periods ending 1993 to 1995.

Arsenic, uranium, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, chromium (total) and nitrate: Pennsylvania’s own results, samples taken from July 30, 2020 to Sept. 14, 2026, with EPA’s 2012 to 2019 file for earlier years.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples.

EPA’s 2024 PFAS rule, compound by compound

PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 13 samples
PFOS4.0 pptNot foundNot found in any of 13 samples
PFHxS10 pptNot foundNot found in any of 13 samples
PFNA10 pptNot foundNot found in any of 13 samples
HFPO-DA (GenX)10 pptNot foundNot found in any of 13 samples
PFBSIndex onlyNot foundNot found in any of 13 samples
Results from Pennsylvania’s own PFAS monitoring, samples where water enters the pipes; each compound’s card has its four-quarter averages, the way limits are judged. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. Pennsylvania’s own limits for PFOA and PFOS are in force now. PFBS has no limit of its own and counts only toward EPA’s Hazard Index, which TapBuff works out only from UCMR 5’s averages, so it isn’t given here.

Above the health goal3

Lead

Comes from pipes, often your own

Above the health goal

6.0ppb

90th percentile, 1995

In the latest period, 9 in 10 homes sampled were at or below 6.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Arsenic

Comes from the source

Above the health goal

2.7ppb

Highest yearly average, 2021 to 2024

Averaged by year, the highest was 2.7 ppb, in 2024: below EPA’s legal limit of 10 ppb, but above its health goal of zero. Its highest single sample was 3.8 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 3.5 ppb, in 2015.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Uranium

Comes from the source

Above the health goal

2.0ppb

Highest yearly average, 2022 to 2024

Averaged by year, the highest was 2.0 ppb, in 2024: below EPA’s legal limit of 30 ppb, but above its health goal of zero. Its highest single sample was 2.1 ppb. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 1.8 ppb, in 2012.

What handles it

Below EPA’s limits3

Total trihalomethanes (TTHM)

Forms or is added in treatment

Below EPA’s limits

38.1ppb

Highest yearly average, 2020 to 2026

2026 average: 31.6 ppb

Averaged by year, the highest was 38.1 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 58.5 ppb. In 2026, the latest year on file, its two samples averaged 31.6 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 44 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

9.5ppb

Highest yearly average, 2020 to 2026

2026 average: 7.4 ppb

Averaged by year, the highest was 9.5 ppb, in 2024, below EPA’s legal limit of 60 ppb. Its highest single sample was 11.6 ppb. In 2026, the latest year on file, its two samples averaged 7.4 ppb. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 10.6 ppb, in 2019.

What handles it

No certification claim covers this compound yet.

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.05ppm

Highest yearly average, 2021 to 2024

2024: not found

Averaged by year, the highest was 0.05 ppm, in 2021, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.1 ppm. In 2024, the latest year on file, it wasn’t found in any of its three samples. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 0.1 ppm, in 2012.

What handles it

8 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Chromium (total)
  • Nitrate

PFAS, from Pennsylvania’s own monitoring

  • HFPO-DA (GenX)
  • PFBS
  • PFHxS
  • PFNA
  • PFOA
  • PFOS

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: Lead, Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Lead Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Uranium

    For: Lead, Arsenic, Uranium

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

The best reverse osmosis systems, ranked

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, uranium, total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, chromium (total) and nitrate results here are Pennsylvania’s own from 2020 on, with EPA’s national file for 2012 to 2019. Aqua PA Beech Mountain’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; Pennsylvania’s results run from July 30, 2020 to Sept. 14, 2026; Pennsylvania’s PFAS results run from Feb. 8, 2024 to Aug. 11, 2026.

Testing your own tap

Aqua PA Beech Mountain’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Pennsylvania certifies.

The 3 labs Pennsylvania certifies closest to the area Aqua PA Beech Mountain serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • HawkMtn Labs Inc

    Hazle Township, PA · about 6 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (570) 455-6011

  • A E Kirby Memorial Health Center

    Wilkes-Barre, PA · about 16 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (570) 822-4278

  • Microbac Laboratories, Inc. - Pittston

    Pittston, PA · about 23 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (570) 348-0775

Penn State Agricultural Analytical Services Laboratory: Drinking water test kits from many county Extension offices, mailed back to the lab overnight with payment. Packages cover bacteria and basic chemistry, with add-ons for nitrate, metals, lead, and mining or gas drilling concerns. The standard package of bacteria, pH and total dissolved solids is $60, or $70 with nitrate; bacteria alone is $40, nitrate $15 and lead $25. Drinking Water Testing, Penn State Agricultural Analytical Services Lab.

All 108 certified labs for Pennsylvania

Sources

PWSID PA2400114. Rebuilt from EPA data on Oct. 18, 2026.

Towns it serves

Also in Luzerne County

All Pennsylvania utilities

What to do next