Cleveland Public Water System
EPA’s and Ohio’s records have results for 37 contaminants in its water; 4 were found.
Serves 1.3 million people · Surface water · Cleveland, OH · Hardness: moderately hard
- Serves
- 1.3 million people
- Connections
- 445,151
- Water source
- Surface water
- Based in
- Cleveland, OH
- County
- Cuyahoga
- Owner
- Local government
- Hardness
- Moderately hard
The 60 ZIP codes it serves
44012, 44017, 44022, 44023, 44026, 44028, 44040, 44056, 44067, 44070, 44072, 44077, 44087, 44094, 44095, 44101, 44102, 44103, 44104, 44105, 44106, 44107, 44108, 44109, 44110, 44111, 44112, 44113, 44114, 44115, 44116, 44117, 44118, 44119, 44120, 44121, 44122, 44123, 44124, 44125, 44126, 44127, 44128, 44129, 44130, 44131, 44132, 44133, 44134, 44135, 44136, 44137, 44138, 44139, 44140, 44141, 44142, 44143, 44144, 44145
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Sept. 3, 2024 to June 3, 2025.
Lead and copper: copper at 87.3 mg/L (2005) is left out of this report: it is one of the results Ohio sent EPA in 2006, all at µg/L magnitudes though EPA’s file marks them mg/L.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic and chromium (total): Ohio’s own results, samples taken from Jan. 13, 2020 to Dec. 1, 2025, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Below EPA’s limits, 4 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 29.1 ppb
Highest yearly average, 2020 to 2025 · 2025 average: 22.1 ppb · Forms or is added in treatment
Averaged by year, the highest was 29.1 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 88.9 ppb. In 2025, the latest year on file, its 32 samples averaged below the limit. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 35.1 ppb, in 2012.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 17.4 ppb
Highest yearly average, 2020 to 2025 · 2025 average: 8.2 ppb · Forms or is added in treatment
Averaged by year, the highest was 17.4 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 34.2 ppb. In 2025, the latest year on file, its 32 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 24.1 ppb, in 2013.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.98 ppm
Highest yearly average, 2020 to 2025 · 2025 average: 0.9 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.98 ppm, in 2022, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.2 ppm. In 2025, the latest year on file, its four samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.1 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Nitrate, Legal limit 10 ppm; highest 1.4 ppm
Highest sample; found in 215 of 292 · 2025 average: 0.17 ppm · Comes from the source
The highest sample, in 2021, was 1.4 ppm, below EPA’s legal limit of 10 ppm. In 2025, the latest year on file, its 48 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 1.3 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
No health-based violations on file with EPA since 2016. There are 9 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Hardness
Moderately hard on average, 117 mg/L (6.8 grains per gallon), ranging from 105 to 130 mg/L, in its 2025 water quality report.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Cleveland Public Water System reported disinfecting with chlorine, not chloramine, at all 4 of its sampling points, in its 2024 to 2025 sampling for EPA. It also reported permanganate.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride, nitrate, arsenic and chromium (total) results here are Ohio’s own from 2020 on, with EPA’s national file for 2012 to 2019. Cleveland Public Water System’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Sept. 3, 2024 to June 3, 2025; Ohio’s results run from Jan. 13, 2020 to Dec. 1, 2025.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Cleveland Public Water System’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Ohio certifies closest to the area Cleveland Public Water System serves, or a kit by mail
The 3 labs Ohio certifies closest to the area Cleveland Public Water System serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
NEORSD Analytical Services
Cuyahoga Heights, OH · about 4 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics
Eurofins Environment Testing North Central
Cleveland, OH · about 5 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts
Cleveland Water Compliance Laboratory
Cleveland, OH · about 6 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Ohio certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Ohio’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Decide if you want a filter at allA filter for taste or chlorine is a preference, not a need. The standards say what each kind can do.NSF/ANSI standards, decoded
- Get the utility’s own reportCleveland Public Water System must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Ohio Environmental Protection Agency, Division of Drinking and Ground Waters, results from Jan. 2, 2020 to Dec. 31, 2025, read Oct. 17, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Hardness: 2025 Water Quality Report, page 15, read Oct. 10, 2026
- Certified labs: Ohio EPA, laboratories certified/accepted to perform analyses on public drinking water, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID OH1801212. Rebuilt from EPA data on Oct. 25, 2026.
Towns it serves
- Cleveland
- Parma
- Euclid
- Strongsville
- Cleveland Heights
- Brunswick
- Westlake
- North Olmsted
- North Royalton
- Garfield Heights
- Shaker Heights
- Maple Heights
And 43 more.
Also in Cuyahoga County
- Lakewood City PWS50,942
- Berea City PWS18,789
- Bedford City PWS13,149
- Chagrin Falls Village PWS4,991
- Columbia Park Water System2,716
- Greentree Water Company56