Skip to content
TapBuff

Under the Blue Ridge

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
50 people
Connections
20
Water source
Groundwater
Based in
Asheville, NC
County
Buncombe
Owner
Private
The ZIP code it serves

28805

The short answer

Nothing in EPA’s and CDC’s records for this utility is above a health goal. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. 1 health-based violation since 2016.

What was found

Arsenic, haloacetic acids (HAA5), nitrate and total trihalomethanes (TTHM): North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023.

Fluoride, chromium (total) and uranium: EPA’s compliance monitoring file, samples taken from Dec. 15, 2013 to Dec. 15, 2019. Newer results are in the utility’s annual water quality report.

Below EPA’s limits1

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.16ppm

Highest yearly average, 2013 to 2019

2019, one sample: 0.16 ppm

Averaged by year, the highest was 0.16 ppm, in 2016, below EPA’s legal limit of 4.0 ppm. In 2019, the latest year on file, its one sample was 0.16 ppm.

What handles it

7 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead
  • Nitrate
  • Total trihalomethanes (TTHM)
  • Uranium

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper Rule RevisionsThe required inventory of lead service lines was not completed or submitted on time.EPA: LSL InventoryOct. 17, 2024—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 33 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Arsenic, haloacetic acids (HAA5), nitrate and total trihalomethanes (TTHM) results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride, chromium (total) and uranium come from EPA’s file alone, which ends in 2019. Under the Blue Ridge’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from Dec. 15, 2013 to Dec. 15, 2019.

Testing your own tap

Under the Blue Ridge’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

The 3 labs North Carolina certifies closest to the area Under the Blue Ridge serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Environmental Testing Solutions, Inc.

    Asheville, NC · about 5 miles

    Certified for bacteria, nitrate

    (828) 350-9364

  • Buncombe County Health Dept.

    Asheville, NC · about 5 miles

    Certified for bacteria

    (828) 250-5124

  • WNC Independent Labs

    Weaverville, NC · about 8 miles

    Certified for bacteria

    (828) 552-5174

All 112 certified labs for North Carolina

Sources

PWSID NC0111147. Rebuilt from EPA data on Oct. 18, 2026.