Skip to content
TapBuff

Town of Faith

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
1,316 people
Connections
518
Water source
Groundwater
Based in
Faith, NC
County
Rowan
Owner
Local government
The 2 ZIP codes it serves

28041, 28146

The short answer

1 result is above the health goal. The worst: Uranium, above the health goal. 1 health-based violation since 2016.

What handles it

What was found

Nitrate, haloacetic acids (HAA5), arsenic and total trihalomethanes (TTHM): North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Uranium, fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from June 7, 2012 to Oct. 10, 2019. Newer results are in the utility’s annual water quality report.

Above the health goal1

Uranium

Comes from the source

Above the health goal

2.4ppb

Highest yearly average, 2013 to 2019

2019 average: 0.99 ppb

Averaged by year, the highest was 2.4 ppb, in 2013: below EPA’s legal limit of 30 ppb, but above its health goal of zero. Its highest single sample was 3.0 ppb. In 2019, the latest year on file, its three samples averaged 0.99 ppb.

What handles it

Below EPA’s limits3

Nitrate

Comes from the source

Below EPA’s limits

2.0ppm

Highest yearly average, 2020 to 2023

2023 average: 1.7 ppm

Averaged by year, the highest was 2.0 ppm, in 2020, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it averaged 1.7 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 3.4 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.75ppm

Highest yearly average, 2012 to 2019

Averaged by year, the highest was 0.75 ppm, in 2019, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 1.1 ppm. That was also the latest year on file.

What handles it

Haloacetic acids (HAA5)

Forms or is added in treatment

Below EPA’s limits

1.1ppb

Highest yearly average, 2020 to 2023

2023 average: 0.63 ppb

Averaged by year, the highest was 1.1 ppb, in 2020, below EPA’s legal limit of 60 ppb. In 2023, the latest year on file, it averaged 0.63 ppb.

What handles it

No certification claim covers this compound yet.

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper RuleA required study or plan for corrosion control was not done on time.EPA: OCCT/SOWT Study/RecommendationApril 1, 2024—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 6 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, haloacetic acids (HAA5), arsenic and total trihalomethanes (TTHM) results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Uranium, fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Town of Faith’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from June 7, 2012 to Oct. 10, 2019.

Testing your own tap

Town of Faith’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

The 3 labs North Carolina certifies closest to the area Town of Faith serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • K & W Laboratories, LLC

    Midland, NC · about 26 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (704) 888-1211

  • Pace Analytical Services- Huntersville NC

    Huntersville, NC · about 30 miles

    Certified for bacteria, organic chemicals, disinfection byproducts

    (803) 227-2702

  • Statesville Analytical, Holdings, LLC

    Statesville, NC · about 31 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics

    (704) 872-4697

All 112 certified labs for North Carolina

Sources

PWSID NC0180055. Rebuilt from EPA data on Oct. 18, 2026.