Skip to content
TapBuff

Eagle Creek S/D

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
223 people
Connections
89
Water source
Groundwater
Based in
Raleigh, NC
County
Wake
Owner
Private
The ZIP code it serves

27606

The short answer

1 result is above the health goal. The worst: Arsenic, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Arsenic, haloacetic acids (HAA5), nitrate, total trihalomethanes (TTHM) and uranium: North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from April 3, 2012 to Dec. 3, 2019. Newer results are in the utility’s annual water quality report.

Above the health goal1

Arsenic

Comes from the source

Above the health goal

5.6ppb

Highest yearly average, 2020 to 2023

2023: not found

Averaged by year, the highest was 5.6 ppb, in 2020: below EPA’s legal limit of 10 ppb, but above its health goal of zero. In 2023, the latest year on file, it wasn’t found. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 6.5 ppb, in 2017.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”

Below EPA’s limits1

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.15ppm

Highest yearly average, 2012 to 2019

2019, one sample: 0.15 ppm

Averaged by year, the highest was 0.15 ppm, in 2015, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.17 ppm. In 2019, the latest year on file, its one sample was 0.15 ppm.

What handles it

6 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead
  • Nitrate
  • Total trihalomethanes (TTHM)
  • Uranium

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

  • NSF/ANSI 53

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claim: Arsenic (Pentavalent)<=50 ppb Reduction

    For: Arsenic

    Other certifiers’ wording: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best reverse osmosis systems, ranked

Violations since 2016

No health-based violations on file with EPA since 2016. There are 2 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, haloacetic acids (HAA5), nitrate, total trihalomethanes (TTHM) and uranium results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Eagle Creek S/D’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from April 3, 2012 to Dec. 3, 2019.

Testing your own tap

Eagle Creek S/D’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

The 3 labs North Carolina certifies closest to the area Eagle Creek S/D serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Eurofins Built Env. Testing East - Cary

    Cary, NC · about 4 miles

    Certified for asbestos

    (919) 481-1413

  • Eurofins Raleigh

    Cary, NC · about 4 miles

    Certified for bacteria, nitrate, minerals and other inorganics

    (919) 467-3090

  • NC State Lab of Public Health

    Raleigh, NC · about 5 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (919) 733-7308

All 112 certified labs for North Carolina

Sources

PWSID NC4392128. Rebuilt from EPA data on Oct. 18, 2026.