Cross Creek MHP
What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.
- Serves
- 467 people
- Connections
- 184
- Water source
- Groundwater
- Based in
- Raleigh, NC
- County
- Wake
- Owner
- Private
The ZIP code it serves
The short answer
1 result is above the health goal. The worst: Uranium, above the health goal. No health-based violations on file since 2016.
What handles itWhat was found
Uranium, nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5) and arsenic: North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.
Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from July 24, 2012 to July 19, 2018. Newer results are in the utility’s annual water quality report.
Above the health goal1
Uranium
Comes from the source
6.4ppb
Highest yearly average, 2020 to 2023
2023: not found
Averaged by year, the highest was 6.4 ppb, in 2020: below EPA’s legal limit of 30 ppb, but above its health goal of zero. In 2023, the latest year on file, it wasn’t found. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 9.0 ppb, in 2013.
What handles it
- NSF/ANSI 58 look for “Uranium”
Below EPA’s limits4
Nitrate
Comes from the source
1.4ppm
Highest yearly average, 2020 to 2023
2023 average: 1.1 ppm
Averaged by year, the highest was 1.4 ppm, in 2022, below EPA’s legal limit of 10 ppm. In 2023, the latest year on file, it averaged 1.1 ppm. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 3.6 ppm, in 2012.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Total trihalomethanes (TTHM)
Forms or is added in treatment
5.1ppb
Highest yearly average, 2022
Averaged by year, the highest was 5.1 ppb, in 2022, below EPA’s legal limit of 80 ppb. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 31 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5)
Forms or is added in treatment
2.9ppb
Highest yearly average, 2022
Averaged by year, the highest was 2.9 ppb, in 2022, below EPA’s legal limit of 60 ppb. That is the only year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest yearly average of 12 ppb, in 2019.
What handles it
No certification claim covers this compound yet.
Fluoride
Forms or is added in treatment
0.18ppm
Highest yearly average, 2012 to 2018
2018 average: 0.15 ppm
Averaged by year, the highest was 0.18 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.36 ppm. In 2018, the latest year on file, its two samples averaged 0.15 ppm.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
3 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
- Arsenic
- Chromium (total)
- Lead
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”
- NSF/ANSI 58
Claim: Uranium
For: Uranium
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.
Compare five-year costsViolations since 2016
No health-based violations on file with EPA since 2016.
What this report can’t tell you
Everything else. Uranium, nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5) and arsenic results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Cross Creek MHP’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from July 24, 2012 to July 19, 2018.
Testing your own tap
The 3 labs North Carolina certifies closest to the area Cross Creek MHP serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Wake County Human Services-Public Health Ctr.
Raleigh, NC · under a mile
Certified for bacteria, nitrate, metals, minerals and other inorganics
NC State Lab of Public Health
Raleigh, NC · about 11 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity
Eurofins Built Env. Testing East - Cary
Cary, NC · about 14 miles
Certified for asbestos
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- CDC Environmental Public Health Tracking Network, yearly averages North Carolina supplied to CDC, 2020 to 2023, read Oct. 8, 2026. TapBuff’s comparisons with EPA’s limits are its own, not CDC’s or North Carolina’s.
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Certified labs: North Carolina State Laboratory of Public Health, certified drinking water laboratories, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID NC0392351. Rebuilt from EPA data on Oct. 18, 2026.
What to do next
- Read up on UraniumWhat each one does to health, where it comes from, and the certification claim that addresses it.About Uranium
- Get the utility’s own reportCross Creek MHP must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
- Compare certified filtersWhat the filters certified for these results cost over five years, cartridges included.Compare five-year costs