Skip to content
TapBuff

Buffaloe Road MHP

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
162 people
Connections
66
Water source
Groundwater
Based in
Raleigh, NC
County
Wake
Owner
Private
The ZIP code it serves

27616

The short answer

1 result is above EPA’s legal limit, and 1 more is above the health goal. The worst: Copper, above the action level. 1 health-based violation since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2007 to 2021.

Nitrate, arsenic, haloacetic acids (HAA5) and total trihalomethanes (TTHM): North Carolina’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Uranium, fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from Aug. 23, 2013 to April 26, 2018. Newer results are in the utility’s annual water quality report.

Above the legal limit1

Copper

Comes from pipes, often your own

Above the action level

1.4ppm

90th percentile, 2021

In the latest period, 9 in 10 homes sampled were at or below 1.4 ppm, above EPA’s action level of 1.3 ppm.

What handles it

Above the health goal1

Uranium

Comes from the source

Above the health goal

2.6ppb

Highest yearly average, 2014

Averaged by year, the highest was 2.6 ppb, in 2014: below EPA’s legal limit of 30 ppb, but above its health goal of zero. Its highest single sample was 5.1 ppb. That is the only year on file.

What handles it

Below EPA’s limits2

Nitrate

Comes from the source

Below EPA’s limits

5.4ppm

Highest yearly average, 2020 to 2023

Averaged by year, the highest was 5.4 ppm, in 2023, below EPA’s legal limit of 10 ppm. That was also the latest year on file. Earlier, from 2012 to 2019, EPA’s file shows a highest sample of 7.3 ppm, in 2019.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.17ppm

Highest yearly average, 2013 to 2018

Averaged by year, the highest was 0.17 ppm, in 2018, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.22 ppm. That was also the latest year on file.

What handles it

5 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Chromium (total)
  • Haloacetic acids (HAA5)
  • Lead
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

Violations since 2016

Contaminant or ruleTypePeriodMeasuredStatus
Lead and Copper RuleA required study or plan for corrosion control was not done on time.EPA: OCCT/SOWT Study/RecommendationJune 1, 2021—Resolved
Health-based violations only. Resolved and archived mean the utility returned to compliance or the state closed the record. 12 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, arsenic, haloacetic acids (HAA5) and total trihalomethanes (TTHM) results here are North Carolina’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Uranium, fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Buffaloe Road MHP’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for North Carolina cover 2020 to 2023; EPA’s compliance samples are from Aug. 23, 2013 to April 26, 2018.

Testing your own tap

Buffaloe Road MHP’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab North Carolina certifies.

The 3 labs North Carolina certifies closest to the area Buffaloe Road MHP serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Wake County Human Services-Public Health Ctr.

    Raleigh, NC · about 8 miles

    Certified for bacteria, nitrate, metals, minerals and other inorganics

    (919) 250-4437

  • NC State Lab of Public Health

    Raleigh, NC · about 11 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts, radioactivity

    (919) 733-7308

  • Eurofins Built Env. Testing East - Cary

    Cary, NC · about 16 miles

    Certified for asbestos

    (919) 481-1413

All 112 certified labs for North Carolina

Sources

PWSID NC0392144. Rebuilt from EPA data on Oct. 18, 2026.