Skip to content
TapBuff

Bethpage WD

EPA’s and New York’s records have results for 38 contaminants in its water; 8 were found.

Serves 33,000 people · Groundwater · Oyster Bay (T), NY

Serves
33,000 people
Connections
8,434
Water source
Groundwater
Based in
Oyster Bay (T), NY
County
Nassau
Owner
Local government
The 5 ZIP codes it serves

11714, 11735, 11756, 11803, 11804

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for uranium, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Jan. 10 to July 25, 2023.

Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM) and arsenic: New York’s yearly summaries per water system, 2020 to 2024, with EPA’s 2012 to 2019 file for earlier years.

Uranium, chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from May 10, 2012 to June 10, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.

PFAS: PFBS was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Three other PFAS with no federal limit were found, the highest PFBA at 9.3 ppt: see them below.

Below EPA’s limits, 5 results

Uranium has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Health benchmark:
A screening level EPA uses where there is no legal limit or health goal, not an enforceable limit.
Nitrate, Legal limit 10 ppm; highest 8.4 ppm

Highest sample; found in 201 of 202 · 2024 average: 2.1 ppm · Comes from the source

The highest sample, in 2020, was 8.4 ppm, below EPA’s legal limit of 10 ppm. In 2024, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 8.4 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1.5 ppb

Highest yearly average, 2012 to 2018 · 2018: not found · Comes from the source

Averaged by year, the highest was 1.5 ppb, in 2013, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 7.6 ppb. In 2018, the latest year on file, it wasn’t found in any of its nine samples.

What handles it

About uranium
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.8 ppb

Highest yearly average, 2020 to 2024 · 2024: not found · Forms or is added in treatment

Averaged by year, the highest was 2.8 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 3.0 ppb. In 2024, the latest year on file, it wasn’t found.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.98 ppb

Highest yearly average, 2020 to 2024 · 2024 average: 0.58 ppb · Forms or is added in treatment

Averaged by year, the highest was 0.98 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 1.9 ppb. In 2024, the latest year on file, it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.01 ppb, in 2019.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
PFBS, Health benchmark 2,000 ppt; highest 3.5 ppt

Highest sample, July 25, 2023; found in 1 of 10 · Comes from the source

The highest sample was 3.5 ppt, below EPA’s health benchmark of 2,000 ppt. PFBS has no legal limit or health goal of its own.

What handles it

About PFBS
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptNot foundNot found in any of 10 samples, below 4 ppt
PFOS4.0 pptNot foundNot found in any of 10 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 10 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 10 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 10 samples, below 5 ppt
PFBSIndex onlyBelow EPA’s limits3.5 ppt highest, found in 1 of 10 samples. Details
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
New York utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA9.3 ppt1 of 10None covers it
PFPeA6.2 ppt1 of 10None covers it
PFHxA4.8 ppt1 of 10None covers it
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Lead

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

None of the filters TapBuff has checked so far carry these claims. Search the certifier listings for the claim above.

Compare five-year costs

Every filter certified for it⁠

Disinfectant

Bethpage WD reported disinfecting with chlorine, not chloramine, at all 5 of its sampling points, in its 2023 sampling for EPA. It also reported hydrogen peroxide and ultraviolet light.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM) and arsenic results here are New York’s own yearly summaries from 2020 on, with EPA’s national file for 2012 to 2019. Uranium, chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Bethpage WD’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 10 to July 25, 2023; New York’s yearly summaries cover 2020 to 2024; EPA’s compliance samples are from May 10, 2012 to June 10, 2019.

Testing your own tap

Bethpage WD’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New York certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Bethpage WD’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs New York certifies closest to the area Bethpage WD serves, or a kit by mail

The 3 labs New York certifies closest to the area Bethpage WD serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Certified Laboratories LLC

    Melville, NY · about 4 miles

    Certified for bacteria

    (516) 576-1400

  • Pace Analytical Services, LLC - Melville, NY

    Melville, NY · about 4 miles

    Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts

    (516) 370-6000

  • EMSL Analytical, Inc.

    Carle Place, NY · about 7 miles

    Certified for bacteria, lead and copper, asbestos

    (516) 997-7251

All 161 certified labs for New York⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New York certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New York’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NY2902817. Rebuilt from EPA data on Oct. 25, 2026.