Liberty Utilities New York - Merrick
EPA’s and New York’s records have results for 38 contaminants in its water; 5 were found.
Serves 135,000 people · Groundwater · Hempstead (T), NY
- Serves
- 135,000 people
- Connections
- 46,440
- Water source
- Groundwater
- Based in
- Hempstead (T), NY
- County
- Nassau
- Owner
- Private
The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 3 health-based violations since 2016, all resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from March 28, 2023 to July 10, 2025.
Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic and uranium: New York’s yearly summaries per water system, 2020 to 2024, with EPA’s 2012 to 2019 file for earlier years.
Fluoride and chromium (total): EPA’s compliance monitoring file, samples taken from April 3, 2012 to Nov. 15, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
139 ppb
Highest sample, April 12, 2023; found in 1 of 13
The highest sample was 139 ppb, about 14 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 4 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 0.32 ppm
Highest sample; found in 14 of 37 · 2024 average: 0.07 ppm · Comes from the source
The highest sample, in 2020, was 0.32 ppm, below EPA’s legal limit of 10 ppm. In 2024, the latest year on file, it averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.24 ppm, in 2018.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.0 ppb
Highest yearly average, 2020 to 2024 · Forms or is added in treatment
Averaged by year, the highest was 1.0 ppb, in 2024, below EPA’s legal limit of 60 ppb. That was also the latest year on file.
What handles it
No certification claim covers this compound yet.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 1.2 ppb
Highest yearly average, 2020 to 2024 · 2024 average: 0.88 ppb · Forms or is added in treatment
Averaged by year, the highest was 1.2 ppb, in 2022, below EPA’s legal limit of 80 ppb. Its highest single sample was 6.3 ppb. In 2024, the latest year on file, it averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.43 ppb, in 2018.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.008 ppm
Highest yearly average, 2012 to 2019 · 2019: not found · Forms or is added in treatment
Averaged by year, the highest was 0.008 ppm, in 2018, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.16 ppm. In 2019, the latest year on file, it wasn’t found in any of its 23 samples.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
33 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Lead
- Uranium
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
3 health-based violations since 2016, all for the Lead and Copper Rule. The latest began July 1, 2024.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Lead and Copper Rule | Water chemistry used to keep pipes from corroding was outside the required range.EPA: WQP Entry Point/Tap Treatment Technique Non-Compliance | July 1, 2024 to Dec. 31, 2024 | Resolved |
| Jan. 1, 2024 to June 30, 2024 | Resolved | ||
| July 1, 2023 to Dec. 31, 2023 | Resolved |
Health-based violations only.
Disinfectant
Liberty Utilities New York - Merrick reported disinfecting with chlorine, not chloramine, at all 8 of its sampling points, in its 2023 to 2025 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Nitrate, haloacetic acids (HAA5), total trihalomethanes (TTHM), arsenic and uranium results here are New York’s own yearly summaries from 2020 on, with EPA’s national file for 2012 to 2019. Fluoride and chromium (total) come from EPA’s file alone, which ends in 2019. Liberty Utilities New York - Merrick’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 28, 2023 to July 10, 2025; New York’s yearly summaries cover 2020 to 2024; EPA’s compliance samples are from April 3, 2012 to Nov. 15, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Liberty Utilities New York - Merrick’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Liberty Utilities New York - Merrick’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs New York certifies closest to the area Liberty Utilities New York - Merrick serves, or a kit by mail
The 3 labs New York certifies closest to the area Liberty Utilities New York - Merrick serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Nassau County Dept of Health
Hempstead, NY · about 6 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics
EMSL Analytical, Inc.
Carle Place, NY · about 8 miles
Certified for bacteria, lead and copper, asbestos
Certified Laboratories LLC
Melville, NY · about 9 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New York certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New York’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportLiberty Utilities New York - Merrick must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- New York State Department of Health, Environmental Public Health Tracker, results from Jan. 1, 2020 to Dec. 31, 2024, read Oct. 8, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: NYS Environmental Laboratory Approval Program (ELAP), drinking water labs, as listed in TNI LAMS, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID NY2902840. Rebuilt from EPA data on Oct. 25, 2026.