Mt Olive Villages Water
EPA’s and New Jersey’s records have results for 38 contaminants in its water; 9 were found.
Serves 5,000 people · Groundwater · Mount Olive Twp., NJ
- Serves
- 5,000 people
- Connections
- 298
- Water source
- Groundwater
- Based in
- Mount Olive Twp., NJ
- County
- Morris
- Owner
- Local government
The ZIP code it serves
The short answer
Copper is above the action level in the latest monitoring period, ending Dec. 31, 2025. PFOA and PFOS are above EPA’s new limit, which takes effect in 2029. 4 health-based violations since 2016, none with a fix on record in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What handles itThe 4 violationsGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from April 11 to Nov. 6, 2023.
Lead and copper: EPA SDWIS monitoring periods ending 1992 to 2025.
Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total) and fluoride: New Jersey’s own results, samples taken from Feb. 11, 2020 to Aug. 24, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: PFOA and PFOS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Two other PFAS with no federal limit were found, the highest PFPeA at 5.2 ppt: see them below.
Above the legal limit, 1 result
Copper
Comes from pipes, often your own
What it means for you. EPA’s concern is stomach and intestinal distress from short-term exposure, and liver or kidney damage over years. A filter certified for it, at the tap you drink from, reduces it.
1.6 ppm
90th percentile, 2025
In the latest period, 9 in 10 homes sampled were at or below 1.6 ppm, above EPA’s action level of 1.3 ppm.
What handles it
- NSF/ANSI 53 look for “Copper Reduction”
- NSF/ANSI 58 look for “Copper Reduction”
Above EPA’s new limit, which takes effect in 2029, 2 results
PFOA
Comes from the source
6.3 ppt
Highest sample, Nov. 6, 2023; found in 6 of 6
The highest sample was 6.3 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 5.8 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOA Reduction”
- NSF/ANSI 58 look for “Perfluorooctanoic Acid (PFOA)”
PFOS
Comes from the source
6.2 ppt
Highest sample, April 11, 2023; found in 6 of 6
The highest sample was 6.2 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 5.5 ppt, also above it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
Below EPA’s limits, 4 results
Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Nitrate, Legal limit 10 ppm; highest 5.2 ppm
Highest sample; found in 2 of 3 · 2020 average: 2.3 ppm · Comes from the source
The highest sample, in 2020, was 5.2 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its three samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 5.7 ppm, in 2019.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Lead, Action level 15 ppb · health goal zero; 90th percentile 5.4 ppb
90th percentile, 2026 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 5.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 18.5 ppb
Highest yearly average, 2020 to 2026 · Forms or is added in treatment
Averaged by year, the highest was 18.5 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 35.9 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 13.4 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.73 ppb
Highest yearly average, 2020 to 2026 · Forms or is added in treatment
Averaged by year, the highest was 0.73 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 1.5 ppb. That was also the latest year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.3 ppb, in 2019.
What handles it
No certification claim covers this compound yet.
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Above EPA’s new limit (2029)6.3 ppt highest, found in 6 of 6 samples. Details |
| PFOS | 4.0 ppt | Above EPA’s new limit (2029)6.2 ppt highest, found in 6 of 6 samples. Details |
| PFHxS | 10 ppt | Not foundNot found in any of 6 samples, below 3 ppt |
| PFNA | 10 ppt | Not foundNot found in any of 6 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 6 samples, below 5 ppt |
| PFBS | Index only | Not foundNot found in any of 6 samples, below 3 ppt |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Doesn’t applyDoesn’t apply: no sampling location found two or more of the four |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFPeA | 5.2 ppt | 3 of 6 | None covers it |
| PFHxA | 3.8 ppt | 3 of 6 | None covers it |
29 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
- Fluoride
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
4 health-based violations since 2016, all for the Lead and Copper Rule. The latest began July 1, 2024, and none has a fix on record in EPA’s file.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| Lead and Copper Rule | Water chemistry used to keep pipes from corroding was outside the required range.EPA: WQP Entry Point/Tap Treatment Technique Non-Compliance | July 1, 2024 to Dec. 31, 2024 | No fix on recordEPA: archived |
| Jan. 1, 2024 to June 30, 2024 | No fix on recordEPA: archived | ||
| July 1, 2023 to Dec. 31, 2023 | No fix on recordEPA: archived | ||
| Jan. 1, 2023 to June 30, 2023 | No fix on recordEPA: archived |
Health-based violations only. 153 monitoring or reporting violations not shown.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.
- NSF/ANSI 53
Claims: Copper Reduction, PFOA Reduction, PFOS Reduction, Lead Reduction
For: Copper, PFOA, PFOS, Lead
Other certifiers’ wording: Perfluorooctanoic Acid (PFOA); Perfluorooctane Sulfonate (PFOS)
Other claims that cover it: Total PFAS Reduction
- NSF/ANSI 58
Claims: Copper Reduction, Perfluorooctanoic Acid (PFOA), Perfluorooctane Sulfonate (PFOS), Lead Reduction
For: Copper, PFOA, PFOS, Lead
At the tap, or for the whole house?
Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Copper, PFOA, PFOS; also lead, found below its limits
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for: Copper, PFOA, PFOS; also lead, found below its limits
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Copper, PFOA, PFOS; also lead, found below its limits
2 more filters
Culligan 10-Cup Pitcher with ZeroWater Technology (ZEROP10)
Pitcher
Five years: $5,103, household of 3, cartridges included
Certified for: Copper, PFOA, PFOS; also lead, found below its limits
Every filter for these, those that cover all 3 first
Disinfectant
Mt Olive Villages Water reported disinfecting with chlorine, not chloramine, at all 3 of its sampling points, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total) and fluoride results here are New Jersey’s own from 2020 on, with EPA’s national file for 2012 to 2019. Mt Olive Villages Water’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 11 to Nov. 6, 2023; New Jersey’s results run from Feb. 11, 2020 to Aug. 24, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Mt Olive Villages Water’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 5.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Mt Olive Villages Water’s results flag: PFOA and PFOS. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs New Jersey certifies closest to the area Mt Olive Villages Water serves, or a kit by mail
The 3 labs New Jersey certifies closest to the area Mt Olive Villages Water serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Radata Analytical Lab
Flanders, NJ · about 4 miles
Advanced Water Technology LLC
Sparta, NJ · about 13 miles
Jacobs
Morristown, NJ · about 15 miles
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New Jersey certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New Jersey’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on these 3 resultsWhat each one does to health, where it comes from, and the certification claim that addresses it.Start with copper
- Get the utility’s own reportMt Olive Villages Water must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- New Jersey Department of Environmental Protection, Drinking Water Viewer, results from Jan. 2, 2020 to Oct. 13, 2026, read Oct. 24, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: NJDEP Office of Quality Assurance, certified drinking water labs, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID NJ1427001. Rebuilt from EPA data on Oct. 25, 2026.