Skip to content
TapBuff

Monroe Twp Utility Department

EPA’s and New Jersey’s records have results for 38 contaminants in its water; 12 were found.

Serves 36,000 people · Groundwater · Monroe Twp., NJ

Serves
36,000 people
Connections
22,379
Water source
Groundwater
Based in
Monroe Twp., NJ
County
Middlesex
Owner
Local government
The ZIP code it serves

08831

The short answer

None of the results here is above a limit in force today. PFOS and PFOA are above EPA’s new limit, which takes effect in 2029. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from March 20, 2023 to Sept. 12, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2019 to 2026.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride and uranium: New Jersey’s own results, samples taken from Jan. 15, 2020 to July 14, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: PFOS, PFOA and PFHxS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. Four other PFAS with no federal limit were found, the highest PFPeA at 11.9 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 2 results

PFOS

Comes from the source

Above EPA’s new limit (2029)

11.5 ppt

Highest sample, March 21, 2023; found in 4 of 10

The highest sample was 11.5 ppt, about 2.9 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 6.7 ppt, also above it.

What handles it

PFOA

Comes from the source

Above EPA’s new limit (2029)

11.2 ppt

Highest sample, March 21, 2023; found in 4 of 10

The highest sample was 11.2 ppt, about 2.8 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 10.4 ppt, also above it.

What handles it

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

20.7 ppb

Highest sample, Sept. 12, 2024; found in 2 of 10

The highest sample was 20.7 ppb, about twice EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 5 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
PFHxS, EPA’s 2029 limit 10 pptAt EPA’s limit, as EPA rounds; highest 13.6 ppt

Highest sample, March 21, 2023; found in 5 of 10 · Comes from the source

The highest sample was 13.6 ppt. As EPA rounds results, that is at EPA’s new limit of 10 ppt, which takes effect in 2029, not above it: EPA counts a result as above it from 15 ppt.

How it’s judged

Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 3.6 ppt, below it.

What handles it

About PFHxS
Nitrate, Legal limit 10 ppm; highest 4.0 ppm

Highest sample; found in 28 of 36 · 2026 average: 1.3 ppm · Comes from the source

The highest sample, in 2021, was 4.0 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its five samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 4.0 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.3 ppb

90th percentile, 2026 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.3 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 5.7 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 4.4 ppb · Forms or is added in treatment

Averaged by year, the highest was 5.7 ppb, in 2020, below EPA’s legal limit of 80 ppb. Its highest single sample was 22 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 25.7 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.63 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 0.63 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 6.4 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 11.3 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)11.2 ppt highest, found in 4 of 10 samples. Details
PFOS4.0 pptAbove EPA’s new limit (2029)11.5 ppt highest, found in 4 of 10 samples. Details
PFHxS10 pptAt EPA’s limit, as EPA rounds13.6 ppt highest, found in 5 of 10 samples. Details
PFNA10 pptNot foundNot found in any of 10 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 10 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 10 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
New Jersey utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA11.9 ppt3 of 10None covers it
PFBA11.3 ppt3 of 10None covers it
PFHxA11.2 ppt3 of 10None covers it
PFHpA6.9 ppt3 of 10NSF/ANSI 53: Total PFAS Reduction
26 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Chromium (total)
  • Fluoride
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpS
  • PFMBA
  • PFMPA
  • PFNA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.

  • NSF/ANSI 53

    Claims: PFOS Reduction, PFOA Reduction, Lead Reduction

    For: PFOS, PFOA, Lead

    Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS); Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claims: Perfluorooctane Sulfonate (PFOS), Perfluorooctanoic Acid (PFOA), Lead Reduction

    For: PFOS, PFOA, Lead

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for PFAS, ranked⁠

The best water filters for lead, ranked⁠

Violations since 2016

No health-based violations on file with EPA since 2016. There are 20 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride and uranium results here are New Jersey’s own from 2020 on, with EPA’s national file for 2012 to 2019. Monroe Twp Utility Department’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from March 20, 2023 to Sept. 12, 2024; New Jersey’s results run from Jan. 15, 2020 to July 14, 2026.

Testing your own tap

Monroe Twp Utility Department’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New Jersey certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Monroe Twp Utility Department’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 1.3 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Monroe Twp Utility Department’s results flag: PFOS, PFOA and lithium. These are in the water the utility sends out, so a test of your tap mostly confirms them. Include them if you want a number for your own home.
The 3 labs New Jersey certifies closest to the area Monroe Twp Utility Department serves, or a kit by mail

The 3 labs New Jersey certifies closest to the area Monroe Twp Utility Department serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 89 certified labs for New Jersey⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New Jersey certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New Jersey’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NJ1213002. Rebuilt from EPA data on Oct. 25, 2026.