Skip to content
TapBuff

Keansburg Water & Sewer Dept.

EPA’s and New Jersey’s records have results for 38 contaminants in its water; 8 were found.

Serves 10,105 people · Surface water bought from another system · Keansburg Boro, NJ

Serves
10,105 people
Connections
3,230
Water source
Surface water bought from another system
Based in
Keansburg Boro, NJ
County
Monmouth
Owner
Local government
The ZIP code it serves

07734

The short answer

None of the results here is above a limit in force today. PFOA is above EPA’s new limit, which takes effect in 2029. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Oct. 16, 2024 to July 8, 2025.

Lead and copper: EPA SDWIS monitoring periods ending 2001 to 2024.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride and nitrate: New Jersey’s own results, samples taken from Jan. 8, 2020 to Sept. 16, 2026, with EPA’s 2012 to 2019 file for earlier years.

Uranium: EPA’s compliance monitoring file, samples taken from Aug. 2, 2017 to Aug. 2, 2017. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOA was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Two other PFAS with no federal limit were found, the highest PFHxA at 4.1 ppt: see them below.

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOA

Comes from the source

Above EPA’s new limit (2029)

8.3 ppt

Highest sample, Oct. 16, 2024; found in 3 of 6

The highest sample was 8.3 ppt, about twice EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 5.5 ppt, also above it.

What handles it

Below EPA’s limits, 5 results

Arsenic and lead have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 32.2 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 32.2 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 68 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 42 ppb, in 2017.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 14.1 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 6.3 ppb · Forms or is added in treatment

Averaged by year, the highest was 14.1 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 43.9 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 16.5 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.69 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.69 ppb, in 2020, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 0.85 ppb. In 2026, the latest year on file, it wasn’t found in any of its three samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 3.1 ppb, in 2012.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.56 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 0.56 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Chromium (total), Legal limit 100 ppb; highest yearly average 0.5 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.5 ppb, in 2020, below EPA’s legal limit of 100 ppb. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.7 ppb, in 2014.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)8.3 ppt highest, found in 3 of 6 samples. Details
PFOS4.0 pptNot foundNot found in any of 6 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 6 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 6 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 6 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 6 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
New Jersey utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFHxA4.1 ppt3 of 6None covers it
PFPeA4.0 ppt3 of 6None covers it
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Fluoride
  • Nitrate
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: PFOA, Arsenic, Lead

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Arsenic (Pentavalent)<=50 ppb Reduction, Lead Reduction

    For: PFOA, Arsenic, Lead

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

The best water filters for lead, ranked⁠

Disinfectant

Keansburg Water & Sewer Dept. reported chloramine at 1 of its 2 sampling points and chlorine without chloramine at 1, in its 2024 to 2025 sampling for EPA. Which one reaches your tap can depend on where you live.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

No health-based violations on file with EPA since 2016. There are 98 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride and nitrate results here are New Jersey’s own from 2020 on, with EPA’s national file for 2012 to 2019. Uranium comes from EPA’s file alone, which ends in 2019. Keansburg Water & Sewer Dept.’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Oct. 16, 2024 to July 8, 2025; New Jersey’s results run from Jan. 8, 2020 to Sept. 16, 2026; EPA’s compliance samples are from Aug. 2 to 2, 2017.

Testing your own tap

Keansburg Water & Sewer Dept.’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New Jersey certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Keansburg Water & Sewer Dept.’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 0.56 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Keansburg Water & Sewer Dept.’s results flag: PFOA. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs New Jersey certifies closest to the area Keansburg Water & Sewer Dept. serves, or a kit by mail

The 3 labs New Jersey certifies closest to the area Keansburg Water & Sewer Dept. serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 89 certified labs for New Jersey⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New Jersey certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New Jersey’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NJ1321001. Rebuilt from EPA data on Oct. 25, 2026.