Skip to content
TapBuff

Butler Water Dept

EPA’s and New Jersey’s records have results for 38 contaminants in its water; 6 were found.

Serves 7,630 people · Surface water · Bloomingdale Boro, NJ

Serves
7,630 people
Connections
2,449
Water source
Surface water
Based in
Bloomingdale Boro, NJ
Counties
Passaic, Morris
Owner
Local government
The 2 ZIP codes it serves

07405, 07480

The short answer

None of the results here is above a limit in force today. PFOA is above EPA’s new limit, which takes effect in 2029. 3 health-based violations since 2016, all resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The 3 violations⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 14 to Nov. 13, 2023.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride, nitrate and uranium: New Jersey’s own results, samples taken from Feb. 18, 2020 to Aug. 18, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOA was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. One other PFAS with no federal limit was found, the highest PFBA at 6.4 ppt: see it below.

Above EPA’s new limit, which takes effect in 2029, 1 result

PFOA

Comes from the source

Above EPA’s new limit (2029)

9.0 ppt

Highest sample, Aug. 15, 2023; found in 4 of 4

The highest sample was 9.0 ppt, about 2.3 times EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 7.2 ppt, also above it.

What handles it

Below EPA’s limits, 4 results

Arsenic has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 62 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 62 ppb, in 2026, below EPA’s legal limit of 80 ppb. Its highest single sample was 98.6 ppb. That was also the latest year on file. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 48.5 ppb, in 2018.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 24.9 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 12.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 24.9 ppb, in 2023, below EPA’s legal limit of 60 ppb. Its highest single sample was 42.6 ppb. In 2026, the latest year on file, its six samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 38.8 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 0.85 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.85 ppb, in 2025, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2026, the latest year on file, it wasn’t found in its one sample.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.56 ppb, in 2013.

What handles it

  • NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
  • NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
About arsenic
Chromium (total), Legal limit 100 ppb; highest yearly average 0.64 ppb

Highest yearly average, 2020 to 2026 · 2026, one sample: 0.52 ppb · Comes from the source

Averaged by year, the highest was 0.64 ppb, in 2025, below EPA’s legal limit of 100 ppb. In 2026, the latest year on file, its one sample was below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.72 ppb, in 2018.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptAbove EPA’s new limit (2029)9.0 ppt highest, found in 4 of 4 samples. Details
PFOS4.0 pptNot foundNot found in any of 4 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 4 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 4 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 4 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 4 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
New Jersey utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA6.4 ppt1 of 4None covers it
32 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Fluoride
  • Lead
  • Nitrate
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claims: PFOA Reduction, Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOA, Arsenic

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction; Arsenic (III) (50 ppb influent level)

  • NSF/ANSI 58

    Claims: Perfluorooctanoic Acid (PFOA), Arsenic (Pentavalent)<=50 ppb Reduction

    For: PFOA, Arsenic

    Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

The best reverse osmosis systems, ranked⁠

Disinfectant

Butler Water Dept reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.

What that means

Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

3 health-based violations since 2016, 2 for the Lead and Copper Rule and 1 for the Interim Enhanced Surface Water Treatment Rule. The latest began June 1, 2024.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Interim Enhanced Surface Water Treatment RuleOne cloudiness reading was above the maximum allowed.EPA: Single Turbidity Exceed (Enhanced SWTR)June 1, 2024 to June 30, 2024Resolved
Lead and Copper RuleWater chemistry used to keep pipes from corroding was outside the required range.EPA: WQP Entry Point/Tap Treatment Technique Non-ComplianceJuly 1, 2021 to Dec. 31, 2021Resolved
Jan. 1, 2021 to June 30, 2021Resolved

Health-based violations only. 19 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic, chromium (total), fluoride, nitrate and uranium results here are New Jersey’s own from 2020 on, with EPA’s national file for 2012 to 2019. Butler Water Dept’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 14 to Nov. 13, 2023; New Jersey’s results run from Feb. 18, 2020 to Aug. 18, 2026.

Testing your own tap

Butler Water Dept’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New Jersey certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Butler Water Dept’s latest lead sampling in EPA’s records, 2025, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Butler Water Dept’s results flag: PFOA. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs New Jersey certifies closest to the area Butler Water Dept serves, or a kit by mail

The 3 labs New Jersey certifies closest to the area Butler Water Dept serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Environmental Laboratory Services, LLC

    Ringwood, NJ · about 7 miles

    (973) 728-8044

  • Pace Analytical Services, LLC-Fairfield

    Fairfield, NJ · about 11 miles

    (973) 227-0422

  • Hampton- Clarke

    Fairfield, NJ · about 11 miles

    (973) 244-9770

All 89 certified labs for New Jersey⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New Jersey certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New Jersey’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NJ1403001. Rebuilt from EPA data on Oct. 25, 2026.