Burlington City Water de
EPA’s and New Jersey’s records have results for 37 contaminants in its water; 7 were found.
Serves 9,835 people · Surface water · Burlington City, NJ
- Serves
- 9,835 people
- Connections
- 3,712
- Water source
- Surface water
- Based in
- Burlington City, NJ
- County
- Burlington
- Owner
- Local government
The ZIP code it serves
The short answer
EPA recorded a violation of the legal limit for total trihalomethanes (TTHM) here in 2021. In 2026, the latest year on file, it averaged 80.3 ppb, below the limit. 10 health-based violations since 2016, all resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What handles itThe 10 violationsGot a notice? What it means
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Feb. 14 to Nov. 13, 2023.
Lead and copper: EPA SDWIS monitoring periods ending 2021 to 2026.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, arsenic and chromium (total): New Jersey’s own results, samples taken from Feb. 13, 2020 to Aug. 12, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. Two other PFAS with no federal limit were found, the highest PFHxA at 3.5 ppt: see them below.
A legal-limit violation on record, below the limit in the latest year, 1 result
Total trihalomethanes (TTHM)
Forms or is added in treatment
What it means for you. EPA’s concern is long-term exposure, years of drinking it, not an immediate risk to health. A violation like this calls for a notice to customers within 30 days. A filter certified for it, at the tap you drink from, reduces it.
80.3 ppb
Highest yearly average, 2020 to 2026
Averaged by year, the highest was 80.3 ppb, in 2026, which EPA rounds to 80 ppb to compare: at its legal limit of 80 ppb, not above it. Its highest single sample was 150 ppb. That was also the latest year on file. EPA recorded a violation for total trihalomethanes (TTHM) at this utility in 2021.
How it’s judged
EPA judges this limit at each sampling point, so a violation can be on record in a year whose average is below it.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 84.4 ppb, in 2018, and EPA recorded violations in 2012, 2014, 2017, 2018 and 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Below EPA’s limits, 4 results
Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 49.5 ppb
Highest yearly average, 2020 to 2026 · 2026 average: 33.1 ppb · Forms or is added in treatment
Averaged by year, the highest was 49.5 ppb, in 2020, below EPA’s legal limit of 60 ppb. Its highest single sample was 71 ppb. In 2026, the latest year on file, its six samples averaged below the limit. EPA recorded no violation for haloacetic acids (HAA5) at this utility since 2020.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 53.7 ppb, in 2017, and EPA recorded a violation in 2018.
What handles it
No certification claim covers this compound yet.
Nitrate, Legal limit 10 ppm; highest 0.95 ppm
One sample · 2022, one sample: 0.95 ppm · Comes from the source
The highest sample, in 2022, was 0.95 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and its one sample was below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 1.2 ppm, in 2014.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Lead, Action level 15 ppb · health goal zero; 90th percentile 0.78 ppb
90th percentile, 2026 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 0.78 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.051 ppm
Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment
Averaged by year, the highest was 0.051 ppm, in 2024, below EPA’s legal limit of 4.0 ppm. In 2026, the latest year on file, it wasn’t found in any of its two samples.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.06 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Also found, with no federal limit
EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.
| Compound | Highest sample | Found in | Certification claim |
|---|---|---|---|
| PFHxA | 3.5 ppt | 1 of 4 | None covers it |
| PFPeA | 3.4 ppt | 1 of 4 | None covers it |
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claims: Trihalomethanes (TTHM) Reduction, Lead Reduction
For: Total trihalomethanes (TTHM), Lead
Other claims that cover it: VOC Reduction
- NSF/ANSI 58
Claims: Trihalomethanes (TTHM) Reduction, Lead Reduction
For: Total trihalomethanes (TTHM), Lead
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
2 more filters
Brita Elite Water Filter Faucet System (SAFF-100/FF-100)
Faucet mount
Five years: $1,004, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: Total trihalomethanes (TTHM); also lead, found below its limits
Every filter certified for it
Disinfectant
Burlington City Water de reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
10 health-based violations since 2016, 7 for TTHM, 2 for the Lead and Copper Rule and 1 for total Haloacetic Acids (HAA5). The latest began April 1, 2021.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | April 1, 2021 to June 30, 2021, 82 ppb | Resolved |
| Lead and Copper Rule | Water chemistry used to keep pipes from corroding was outside the required range.EPA: WQP Entry Point/Tap Treatment Technique Non-Compliance | July 1, 2020 to Dec. 31, 2020 | Resolved |
| Jan. 1, 2020 to June 30, 2020 | Resolved | ||
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Jan. 1, 2019 to March 31, 2019, 85 ppb | Resolved |
| Oct. 1, 2018 to Dec. 31, 2018, 90 ppb | Resolved |
The other 5, back to 2017
| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | July 1, 2018 to Sept. 30, 2018, 94 ppb | Resolved |
| April 1, 2018 to June 30, 2018, 93 ppb | Resolved | ||
| Jan. 1, 2018 to March 31, 2018, 87 ppb | Resolved | ||
| Total Haloacetic Acids (HAA5) | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Jan. 1, 2018 to March 31, 2018, 68 ppb | Resolved |
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | Oct. 1, 2017 to Dec. 31, 2017, 85 ppb | Resolved |
Health-based violations only. 7 monitoring or reporting violations not shown.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate, fluoride, arsenic and chromium (total) results here are New Jersey’s own from 2020 on, with EPA’s national file for 2012 to 2019. Burlington City Water de’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 14 to Nov. 13, 2023; New Jersey’s results run from Feb. 13, 2020 to Aug. 12, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Burlington City Water de’s latest lead sampling in EPA’s records, 2026, had a 90th percentile of 0.78 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Burlington City Water de’s results flag: total trihalomethanes (TTHM). It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs New Jersey certifies closest to the area Burlington City Water de serves, or a kit by mail
The 3 labs New Jersey certifies closest to the area Burlington City Water de serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Innovative Water Solutions Laboratories
Bordentown, NJ · about 5 miles
EMSL Analytical Inc.
Cinnaminson, NJ · about 10 miles
Sadat Associates Inc.
Ewing, NJ · about 13 miles
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New Jersey certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New Jersey’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on total trihalomethanes (TTHM)What it does to health, where it comes from, and the certification claim that addresses it.About total trihalomethanes (TTHM)
- Get the utility’s own reportBurlington City Water de must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- New Jersey Department of Environmental Protection, Drinking Water Viewer, results from Jan. 2, 2020 to Oct. 13, 2026, read Oct. 24, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: NJDEP Office of Quality Assurance, certified drinking water labs, read Oct. 11, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID NJ0305001. Rebuilt from EPA data on Oct. 25, 2026.