Skip to content
TapBuff

Aqua NJ - Blackwood

EPA’s and New Jersey’s records have results for 38 contaminants in its water; 8 were found.

Serves 44,396 people · Surface water bought from another system · Gloucester Twp., NJ

Serves
44,396 people
Connections
14,281
Water source
Surface water bought from another system
Based in
Gloucester Twp., NJ
County
Camden
Owner
Private
The 5 ZIP codes it serves

08012, 08021, 08032, 08081, 08403

The short answer

None of the results here is above a limit in force today. PFOA had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. 1 health-based violation since 2016, resolved in EPA’s file.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

What handles it⁠The violation⁠Got a notice? What it means⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Sept. 23, 2024 to June 3, 2025.

Nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), chromium (total), arsenic and uranium: New Jersey’s own results, samples taken from Jan. 8, 2020 to Sept. 21, 2026, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
EPA’s new limit:
Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: PFOA was found, of the six PFAS in EPA’s 2024 drinking water rule; its result is below. Two other PFAS with no federal limit were found, the highest PFPeA at 3.1 ppt: see them below.

A sample above EPA’s 2029 limit, below it on average, 1 result

PFOA

Comes from the source

A sample above EPA’s 2029 limit

4.8 ppt

Highest sample, Sept. 23, 2024; found in 1 of 19

The highest sample was 4.8 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.

How it’s judged

Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 2.4 ppt, below it.

What handles it

Below EPA’s limits, 5 results

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Nitrate, Legal limit 10 ppm; highest 3.7 ppm

Highest sample; found in 6 of 57 · 2026 average: 0.33 ppm · Comes from the source

The highest sample, in 2023, was 3.7 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its eight samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 2.7 ppm, in 2013.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 12.6 ppb

Highest yearly average, 2020 to 2026 · 2026 average: 10.8 ppb · Forms or is added in treatment

Averaged by year, the highest was 12.6 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 39.7 ppb. In 2026, the latest year on file, its 12 samples averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 10.0 ppb, in 2014.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.4 ppm

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 0.4 ppm, in 2026, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.79 ppm. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.45 ppm, in 2017.

What handles it

About fluoride
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 3.3 ppb

Highest yearly average, 2020 to 2026 · Forms or is added in treatment

Averaged by year, the highest was 3.3 ppb, in 2026, below EPA’s legal limit of 60 ppb. Its highest single sample was 16.4 ppb. That was also the latest year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.7 ppb, in 2018.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Chromium (total), Legal limit 100 ppb; highest yearly average 0.36 ppb

Highest yearly average, 2020 to 2026 · 2026: not found · Comes from the source

Averaged by year, the highest was 0.36 ppb, in 2020, below EPA’s legal limit of 100 ppb. Its highest single sample was 1.2 ppb. In 2026, the latest year on file, it wasn’t found in any of its seven samples.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 2.7 ppb, in 2018.

What handles it

About chromium (total)
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
EPA’s 2024 PFAS rule, compound by compound
PFASEPA’s limitResult
PFOA4.0 pptA sample above EPA’s 2029 limit4.8 ppt highest, found in 1 of 19 samples. Details
PFOS4.0 pptNot foundNot found in any of 19 samples, below 4 ppt
PFHxS10 pptNot foundNot found in any of 19 samples, below 3 ppt
PFNA10 pptNot foundNot found in any of 19 samples, below 4 ppt
HFPO-DA (GenX)10 pptNot foundNot found in any of 19 samples, below 5 ppt
PFBSIndex onlyNot foundNot found in any of 19 samples, below 3 ppt
Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together1Doesn’t applyDoesn’t apply: no sampling location found two or more of the four
Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5.
New Jersey utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFPeA3.1 ppt1 of 19None covers it
PFHxA3.1 ppt1 of 19None covers it
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Lead
  • Uranium

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOS
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA
Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOA Reduction” on one listing can read “Perfluorooctanoic Acid (PFOA)” on another.

  • NSF/ANSI 53

    Claim: PFOA Reduction

    For: PFOA

    Other certifiers’ wording: Perfluorooctanoic Acid (PFOA)

    Other claims that cover it: Total PFAS Reduction

  • NSF/ANSI 58

    Claim: Perfluorooctanoic Acid (PFOA)

    For: PFOA

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.

In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for PFAS, ranked⁠

Disinfectant

Aqua NJ - Blackwood reported chloramine at 1 of its 9 sampling points and chlorine without chloramine at 8, in its 2024 to 2025 sampling for EPA. Which one reaches your tap can depend on where you live.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This utility buys its water from another system, so what it reported may leave out treatment done before the water reaches it. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

Violations since 2016

1 health-based violation since 2016 for the Surface Water Treatment Rule. It began Jan. 1, 2020.

Resolved:
EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
No fix on record:
It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).

EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Got a notice about one? What it means and what to do⁠
Health-based violations, newest first
Contaminant or ruleWhat happenedPeriod, and what was measuredStatus
Surface Water Treatment RuleRequired treatment for surface water or groundwater was not met.EPA: Treatment Technique (SWTR and GWR)Jan. 1, 2020 to Jan. 31, 2020Resolved

Health-based violations only. 9 monitoring or reporting violations not shown.

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), fluoride, haloacetic acids (HAA5), chromium (total), arsenic and uranium results here are New Jersey’s own from 2020 on, with EPA’s national file for 2012 to 2019. Aqua NJ - Blackwood’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Sept. 23, 2024 to June 3, 2025; New Jersey’s results run from Jan. 8, 2020 to Sept. 21, 2026.

Testing your own tap

Aqua NJ - Blackwood’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab New Jersey certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Aqua NJ - Blackwood’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What Aqua NJ - Blackwood’s results flag: PFOA. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs New Jersey certifies closest to the area Aqua NJ - Blackwood serves, or a kit by mail

The 3 labs New Jersey certifies closest to the area Aqua NJ - Blackwood serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

All 89 certified labs for New Jersey⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that New Jersey certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against New Jersey’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID NJ0415002. Rebuilt from EPA data on Oct. 25, 2026.