Kalispell Public Works
EPA’s and Montana’s records have results for 38 contaminants in its water; 8 were found.
Serves 25,000 people · Groundwater · Kalispell, MT · Hardness: very hard
- Serves
- 25,000 people
- Connections
- 9,397
- Water source
- Groundwater
- Based in
- Kalispell, MT
- County
- Flathead
- Owner
- Local government
- Hardness
- Very hard
The short answer
None of the results here is above a limit in force today. PFOS had a sample above EPA’s new limit, which takes effect in 2029, but not on average, the way EPA will judge it. No health-based violations on file since 2016.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Jan. 30 to July 18, 2023.
Lead and copper: EPA SDWIS monitoring periods ending 2004 to 2023.
Nitrate, uranium, fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and chromium (total): Montana’s own results, samples taken from Feb. 12, 2020 to Aug. 12, 2026, with EPA’s 2012 to 2019 file for earlier years.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: PFOS and PFHxS were found, of the six PFAS in EPA’s 2024 drinking water rule; their results are below. None of the other 23 PFAS tested for was found.
A sample above EPA’s 2029 limit, below it on average, 1 result
PFOS
Comes from the source
6.6 ppt
Highest sample, July 18, 2023; found in 1 of 16
The highest sample was 6.6 ppt, above EPA’s new limit of 4.0 ppt, which takes effect in 2029. EPA’s health goal is zero. Averaged at each sampling location, the way EPA will judge it, it is below the limit.
How it’s judged
Compliance will be judged on a running annual average, not one sample. Averaged by sampling location, as EPA compares its UCMR 5 results with the limit, the highest was 3.3 ppt, below it.
What handles it
- NSF/ANSI 53 look for “PFOS Reduction”
- NSF/ANSI 58 look for “Perfluorooctane Sulfonate (PFOS)”
Below EPA’s limits, 7 results
Lead and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Action level:
- Triggers action. If more than 10% of homes sampled are above it, the utility must act.
- 90th percentile:
- How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
- EPA’s new limit:
- Final, but not enforced until April 26, 2029. From then on, the most a utility may deliver.
PFHxS, EPA’s 2029 limit 10 ppt; highest 5.0 ppt
Highest sample, July 18, 2023; found in 2 of 16 · Comes from the source
The highest sample was 5.0 ppt, below EPA’s new limit of 10 ppt, which takes effect in 2029.
What handles it
- NSF/ANSI 53 look for “Total PFAS Reduction”
Nitrate, Legal limit 10 ppm; highest 4.6 ppm
Highest sample; found in 29 of 29 · 2026 average: 0.81 ppm · Comes from the source
The highest sample, in 2023, was 4.6 ppm, below EPA’s legal limit of 10 ppm. In 2026, the latest year on file, its 10 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 2.5 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.0 ppb
90th percentile, 2021 to 2023 · Comes from pipes, often your own
In the latest period, 9 in 10 homes sampled were at or below 2.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.
What handles it
- NSF/ANSI 53 look for “Lead Reduction”
- NSF/ANSI 58 look for “Lead Reduction”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 1.8 ppb
Highest yearly average, 2020 · Comes from the source
Averaged by year, the highest was 1.8 ppb, in 2020, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. Its highest single sample was 1.9 ppb. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.9 ppb, in 2017.
What handles it
- NSF/ANSI 58 look for “Uranium”
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.14 ppm
Highest yearly average, 2020 to 2026 · 2026 average: 0.12 ppm · Forms or is added in treatment
Averaged by year, the highest was 0.14 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.2 ppm. In 2026, the latest year on file, its 10 samples averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.15 ppm, in 2013.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.4 ppb
Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment
Averaged by year, the highest was 0.4 ppb, in 2021, below EPA’s legal limit of 80 ppb. Its highest single sample was 1.2 ppb. In 2026, the latest year on file, it wasn’t found in any of its 12 samples.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 1.3 ppb, in 2019.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 0.14 ppb
Highest yearly average, 2020 to 2026 · 2026: not found · Forms or is added in treatment
Averaged by year, the highest was 0.14 ppb, in 2021, below EPA’s legal limit of 60 ppb. Its highest single sample was 0.29 ppb. In 2026, the latest year on file, it wasn’t found in any of its two samples.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.14 ppb, in 2013.
What handles it
No certification claim covers this compound yet.
EPA’s 2024 PFAS rule, compound by compoundAll six, found or not, and the Hazard Index, against the rule’s limits.
| PFAS | EPA’s limit | Result |
|---|---|---|
| PFOA | 4.0 ppt | Not foundNot found in any of 16 samples, below 4 ppt |
| PFOS | 4.0 ppt | A sample above EPA’s 2029 limit6.6 ppt highest, found in 1 of 16 samples. Details |
| PFHxS | 10 ppt | Below EPA’s limits5.0 ppt highest, found in 2 of 16 samples. Details |
| PFNA | 10 ppt | Not foundNot found in any of 16 samples, below 4 ppt |
| HFPO-DA (GenX) | 10 ppt | Not foundNot found in any of 16 samples, below 5 ppt |
| PFBS | Index only | Not foundNot found in any of 16 samples, below 3 ppt |
| Hazard IndexPFHxS, PFNA, HFPO-DA and PFBS together | 1 | Doesn’t applyDoesn’t apply: no sampling location found two or more of the four |
| Results from EPA’s UCMR 5 sampling. “Below” is the lab’s reporting level: a result under it reads as not found, which is not the same as zero. The limits are EPA’s 2024 rule, with compliance due from 2029; EPA has since proposed changes to some of them, explained on each compound’s page. PFBS has no limit of its own and counts only toward the Hazard Index, which adds up the four, each against EPA’s health-based level, from each sampling location’s average, as EPA’s UCMR 5 summary does. It counts only where two or more of the four were found, and is above the limit from 1.5. | ||
30 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Chromium (total)
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies: “PFOS Reduction” on one listing can read “Perfluorooctane Sulfonate (PFOS)” on another.
- NSF/ANSI 53
Claims: PFOS Reduction, Lead Reduction
For: PFOS, Lead
Other certifiers’ wording: Perfluorooctane Sulfonate (PFOS)
Other claims that cover it: Total PFAS Reduction
- NSF/ANSI 58
Claims: Perfluorooctane Sulfonate (PFOS), Lead Reduction, Uranium
For: PFOS, Lead, Uranium
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
NSF’s PFAS claims are tested to below 20 ppt. EPA’s limit is 4.0 ppt, and EPA says no certification yet shows a filter reaching its levels.
In the meantime, EPA says reducing the PFAS in your water is still an effective way to limit your exposure, and a filter does that only while it is maintained as its maker says, cartridges replaced on schedule. Showering, bathing and washing dishes in the water are unlikely to significantly increase your risk, EPA says, since little PFAS gets in through the skin.
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Express Water StreamLine Direct Connect System (USC001)
Under-sink carbon
Five years: $527, household of 3, cartridges included
Certified for: PFOS; also lead, found below its limits
Brondell Coral UC300 Under Sink Water Filtration System
Under-sink carbon
Five years: $900, household of 3, cartridges included
Certified for: PFOS; also lead, found below its limits
A.O. Smith 2-Stage Under Sink Water Filter (AO-US-200)
Under-sink carbon
Five years: $980, household of 3, cartridges included
Certified for: PFOS; also lead, found below its limits
2 more filters
Aquasana Claryum 2-Stage (AQ-6200)
Under-sink carbon
Five years: $990, household of 3, cartridges included
Certified for: PFOS; also lead, found below its limits
Aquasana Clean Water Machine (AQ-CWM2)
Countertop
Five years: $1,061, household of 3, cartridges included
Certified for: PFOS; also lead, found below its limits
Every filter certified for it
Hardness
Very hard, typically 204 mg/L (11.9 grains per gallon), across 3 sampling points, 2019 to 2024.
Hardness is calcium and magnesium. EPA sets no limit for it: it shows up as scale on fixtures and in water heaters, and as soap that won’t lather. USGS calls water above 60 mg/L moderately hard, above 120 hard and above 180 very hard.
Disinfectant
Kalispell Public Works reported disinfecting with chlorine, not chloramine, at all 8 of its sampling points, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
Violations since 2016
No health-based violations on file with EPA since 2016. There are 25 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What this report can’t tell you
Everything else. Nitrate, uranium, fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5), arsenic and chromium (total) results here are Montana’s own from 2020 on, with EPA’s national file for 2012 to 2019. Kalispell Public Works’s own annual report, which it must send you every year, has the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 30 to July 18, 2023; Montana’s results run from Feb. 12, 2020 to Aug. 12, 2026.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Kalispell Public Works’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 2.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Kalispell Public Works’s results flag: PFOS. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 2 labs Montana certifies closest to the area Kalispell Public Works serves, or a kit by mail
The 2 labs Montana certifies closest to the area Kalispell Public Works serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Montana Environmental Laboratory
Kalispell, MT · under a mile
Certified for bacteria, minerals and other inorganics
Mission Mountain Laboratories
Ravalli, MT · about 65 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Montana certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Montana’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on PFOSWhat it does to health, where it comes from, and the certification claim that addresses it.About PFOS
- Get the utility’s own reportKalispell Public Works must send you a water quality report every year. It covers contaminants this page does not show.How to read it
- Test your own tap for leadYour service line, solder and fixtures decide the lead at your faucet, not the utility’s average.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Montana Department of Environmental Quality, Public Water Supply, results from Jan. 2, 2020 to Oct. 6, 2026, read Oct. 18, 2026
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Montana Department of Public Health and Human Services, Water Laboratory Certification Program, certified laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Hardness: Montana Department of Environmental Quality, Public Water Supply, results from April 15, 2019 to May 22, 2024, read Oct. 18, 2026
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID MT0000259. Rebuilt from EPA data on Oct. 25, 2026.