Skip to content
TapBuff

Shelby County PWSD 1

EPA’s and Missouri’s records have results for 5 contaminants in its water; 5 were found.

In the name, PWSD means public water supply district.

Serves 3,300 people · Surface water bought from another system · Shelbyville, MO

Serves
3,300 people
Connections
1,360
Water source
Surface water bought from another system
Based in
Shelbyville, MO
County
Shelby
Owner
Local government
The 7 ZIP codes it serves

63434, 63439, 63443, 63451, 63456, 63468, 63469

The short answer

None of the results here is above a limit in force today. That covers nitrate, arsenic and other regulated chemicals, plus lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

Lead and copper: EPA SDWIS monitoring periods ending 2016 to 2024.

Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride: the annual water quality reports Missouri writes for each utility, 2025, with EPA’s 2012 to 2019 file for earlier years.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

Below EPA’s limits, 5 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Nitrate, Legal limit 10 ppm; highest 9.2 ppm

Highest result, 2025 · Comes from the source

The highest sample, in 2025, was 9.2 ppm, below EPA’s legal limit of 10 ppm.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 57.5 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 57.5 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 78.4 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 64.4 ppb, in 2015.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 38 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 38 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 51.6 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 41 ppb, in 2014.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.5 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.5 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.24 ppm

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.24 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

What handles it

About fluoride

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

What this report can’t tell you

  • Everything else. Nitrate, total trihalomethanes (TTHM), haloacetic acids (HAA5) and fluoride results here are from the annual water quality reports Missouri writes for each utility, from 2025 on, with EPA’s national file for 2012 to 2019. Shelby County PWSD 1’s own annual report, which it must send you every year, has the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; the reports Missouri writes cover 2025.

Testing your own tap

Shelby County PWSD 1’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Missouri certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Shelby County PWSD 1’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 2.5 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Missouri certifies closest to the area Shelby County PWSD 1 serves, or a kit by mail

The 3 labs Missouri certifies closest to the area Shelby County PWSD 1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Associated Electric Cooperatives Inc. (AECI)

    Clifton Hill, MO · about 43 miles

    Certified for bacteria

    (660) 261-3283

  • Columbia Water and Light Department Power Plant

    Columbia, MO · about 63 miles

    Certified for bacteria

    (573) 874-6242

  • Engineering Surveys & Services

    Columbia, MO · about 63 miles

    Certified for bacteria

    (573) 449-2646

All 64 certified labs for Missouri⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Missouri certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Missouri’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MO2024572. Rebuilt from EPA data on Oct. 25, 2026.