Skip to content
TapBuff

Sedalia PWS

EPA’s, Missouri’s and CDC’s records have results for 37 contaminants in its water; 7 were found.

In the name, PWS means public water system.

Serves 21,725 people · Groundwater · Sedalia, MO

Serves
21,725 people
Connections
10,912
Water source
Groundwater
Based in
Sedalia, MO
County
Pettis
Owner
Local government
The ZIP code it serves

65301

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from April 22 to Oct. 15, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2016 to 2024.

Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate: the annual water quality reports Missouri writes for each utility, 2023 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Arsenic: Missouri’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023.

Chromium (total): EPA’s compliance monitoring file, samples taken from Jan. 24, 2012 to Jan. 17, 2017. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 7 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
Lithium, Health reference level 10 ppbAt EPA’s benchmark, as EPA rounds; highest 14 ppb

Highest sample, April 22, 2024; found in 6 of 10 · Comes from the source

The highest sample was 14 ppb. As EPA rounds results, that is at EPA’s health reference level of 10 ppb, not above it: EPA counts a result as above it from 15 ppb.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report
About lithium
Fluoride, Legal limit 4.0 ppm; highest 0.6 ppm

Highest result, 2023 · Forms or is added in treatment

The highest sample, in 2023, was 0.6 ppm, below EPA’s legal limit of 4.0 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 0.7 ppm, in 2013.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.7 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.7 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 6.0 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 6.0 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 9.3 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 25.7 ppb, in 2012.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Chromium (total), Legal limit 100 ppb; highest yearly average 4.3 ppb

Highest yearly average, 2012 to 2017 · Comes from the source

Averaged by year, the highest was 4.3 ppb, in 2017, below EPA’s legal limit of 100 ppb. Its highest single sample was 5.4 ppb. That was also the latest year on file.

What handles it

About chromium (total)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 1.0 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 1.0 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 1.3 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 15.5 ppb, in 2012.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 0.023 ppm

Highest result, 2025 · Comes from the source

The highest sample, in 2025, was 0.023 ppm, below EPA’s legal limit of 10 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.16 ppm, in 2012.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Missouri utilities above EPA’s PFAS limits⁠
30 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

Sedalia PWS reported chloramine at 1 of its 5 sampling points and chlorine without chloramine at 4, in its 2024 sampling for EPA. Which one reaches your tap can depend on where you live. It also reported permanganate.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Fluoride, total trihalomethanes (TTHM), haloacetic acids (HAA5) and nitrate results here are from the annual water quality reports Missouri writes for each utility, from 2023 on, with EPA’s national file for 2012 to 2019. Arsenic results here are Missouri’s yearly averages as CDC publishes them, from 2020 on. Chromium (total) comes from EPA’s file alone, which ends in 2019. Sedalia PWS’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 22 to Oct. 15, 2024; the reports Missouri writes cover 2023 to 2025; CDC’s yearly averages for Missouri cover 2020 to 2023; EPA’s compliance samples are from Jan. 24, 2012 to Jan. 17, 2017.

Testing your own tap

Sedalia PWS’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Missouri certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Sedalia PWS’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 1.7 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Missouri certifies closest to the area Sedalia PWS serves, or a kit by mail

The 3 labs Missouri certifies closest to the area Sedalia PWS serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Missouri American Water Co.-Warrensburg

    Warrensburg, MO · about 28 miles

    Certified for bacteria

    (417) 626-8509

  • Milk Regulatory Consultants

    Russellville, MO · about 44 miles

    Certified for bacteria

    (573) 338-1785

  • Alpha Engineering and Surveying LLC

    Osage Beach, MO · about 49 miles

    Certified for bacteria

    (573) 348-9799

All 64 certified labs for Missouri⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Missouri certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Missouri’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MO3010728. Rebuilt from EPA data on Oct. 25, 2026.