Skip to content
TapBuff

MO American Jefferson City District

EPA’s, Missouri’s and CDC’s records have results for 37 contaminants in its water; 8 were found.

Serves 30,075 people · Surface water · Jefferson City, MO

Serves
30,075 people
Connections
10,875
Water source
Surface water
Based in
Jefferson City, MO
County
Cole
Owner
Private
The 2 ZIP codes it serves

65101, 65109

The short answer

None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. No health-based violations on file since 2016.

This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.

Filters for lead, if you want it lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from Feb. 6 to Nov. 6, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2013 to 2025.

Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and fluoride: the annual water quality reports Missouri writes for each utility, 2025, with EPA’s 2012 to 2019 file for earlier years.

Arsenic: Missouri’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total): EPA’s compliance monitoring file, samples taken from Jan. 18, 2012 to May 7, 2019. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.
Health reference level:
A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. One other PFAS with no federal limit was found, the highest PFBA at 7.2 ppt: see it below.

Above EPA’s health benchmark, 1 result

Lithium

Comes from the source

Above EPA’s health benchmark

92.7 ppb

Highest sample, Aug. 14, 2024; found in 4 of 4

The highest sample was 92.7 ppb, about 9.3 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.

What handles it

No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.

How to read your utility’s report

Below EPA’s limits, 6 results

Lead has a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 53 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 53 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 83 ppb. That is the only year on file. EPA recorded no violation for total trihalomethanes (TTHM) at this utility since 2020.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 48.1 ppb, in 2016.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 22.5 ppb

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 22.5 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 33.6 ppb. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 19.3 ppb, in 2017.

What handles it

No certification claim covers this compound yet.

About haloacetic acids (HAA5)
Nitrate, Legal limit 10 ppm; highest 1.7 ppm

Highest result, 2025 · 2025 average: 1.7 ppm · Comes from the source

The highest sample, in 2025, was 1.7 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and it averaged below the limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 3.2 ppm, in 2016.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.59 ppm

Highest yearly average, 2025 · Forms or is added in treatment

Averaged by year, the highest was 0.59 ppm, in 2025, below EPA’s legal limit of 4.0 ppm. That is the only year on file.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.0 ppm, in 2013.

What handles it

About fluoride
Lead, Action level 15 ppb · health goal zero; 90th percentile 2.0 ppb

90th percentile, 2023 to 2025 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 2.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Chromium (total), Legal limit 100 ppb; highest yearly average 2.1 ppb

Highest yearly average, 2012 to 2019 · 2019: not found · Comes from the source

Averaged by year, the highest was 2.1 ppb, in 2013, below EPA’s legal limit of 100 ppb. Its highest single sample was 9.0 ppb. In 2019, the latest year on file, it wasn’t found in its one sample.

What handles it

About chromium (total)
Missouri utilities above EPA’s PFAS limits⁠

Also found, with no federal limit

EPA measured these PFAS to learn how often they occur. None has a legal limit or a health goal yet.

PFAS found with no federal limit
CompoundHighest sampleFound inCertification claim
PFBA7.2 ppt1 of 4None covers it
29 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter certified for it⁠

The best water filters for lead, ranked⁠

Disinfectant

MO American Jefferson City District reported adding chloramine before water enters its pipes, at its one sampling point, in its 2024 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), nitrate and fluoride results here are from the annual water quality reports Missouri writes for each utility, from 2025 on, with EPA’s national file for 2012 to 2019. Arsenic results here are Missouri’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Chromium (total) comes from EPA’s file alone, which ends in 2019. MO American Jefferson City District’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Feb. 6 to Nov. 6, 2024; the reports Missouri writes cover 2025; CDC’s yearly averages for Missouri cover 2020 to 2023; EPA’s compliance samples are from Jan. 18, 2012 to May 7, 2019.

Testing your own tap

MO American Jefferson City District’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Missouri certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. MO American Jefferson City District’s latest lead sampling in EPA’s records, 2023 to 2025, had a 90th percentile of 2.0 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
  • What MO American Jefferson City District’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Missouri certifies closest to the area MO American Jefferson City District serves, or a kit by mail

The 3 labs Missouri certifies closest to the area MO American Jefferson City District serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Missouri American Water Co.-Jefferson City

    Jefferson City, MO · about 5 miles

    Certified for bacteria

    (573) 636-8616

  • Missouri Department of Health & Senior Services-State Public Health Laboratory

    Jefferson City, MO · about 5 miles

    Certified for bacteria

    (573) 751-3334

  • Milk Regulatory Consultants

    Russellville, MO · about 15 miles

    Certified for bacteria

    (573) 338-1785

All 64 certified labs for Missouri⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Missouri certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Missouri’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MO3010409. Rebuilt from EPA data on Oct. 25, 2026.