Hollister PWS
EPA’s, Missouri’s and CDC’s records have results for 38 contaminants in its water; 7 were found.
In the name, PWS means public water system.
Serves 4,426 people · Groundwater · Hollister, MO
- Serves
- 4,426 people
- Connections
- 1,975
- Water source
- Groundwater
- Based in
- Hollister, MO
- County
- Taney
- Owner
- Local government
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from Jan. 16 to July 17, 2023.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride and nitrate: the annual water quality reports Missouri writes for each utility, 2025, with EPA’s 2012 to 2019 file for earlier years.
Arsenic and uranium: Missouri’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2021 to 2022, with EPA’s 2012 to 2019 file for earlier years.
Chromium (total): EPA’s compliance monitoring file, samples taken from Feb. 19, 2013 to Feb. 26, 2019. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Below EPA’s limits, 7 results
Arsenic and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Arsenic, Legal limit 10 ppb · health goal zero; highest yearly average 2.7 ppb
Highest yearly average, 2021 to 2022 · 2022: not found · Comes from the source
Averaged by year, the highest was 2.7 ppb, in 2021, below EPA’s legal limit of 10 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. In 2022, the latest year on file, it wasn’t found.
What handles it
- NSF/ANSI 58 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
- NSF/ANSI 53 look for “Arsenic (Pentavalent)<=50 ppb Reduction”
Uranium, Legal limit 30 ppb · health goal zero; highest yearly average 5.6 ppb
Highest yearly average, 2021 · Comes from the source
Averaged by year, the highest was 5.6 ppb, in 2021, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 3.1 ppb, in 2016.
What handles it
- NSF/ANSI 58 look for “Uranium”
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 7.0 ppb
Highest yearly average, 2025 · Forms or is added in treatment
Averaged by year, the highest was 7.0 ppb, in 2025, below EPA’s legal limit of 80 ppb. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 5.2 ppb, in 2014.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Chromium (total), Legal limit 100 ppb; highest yearly average 4.5 ppb
Highest yearly average, 2013 to 2019 · 2019: not found · Comes from the source
Averaged by year, the highest was 4.5 ppb, in 2013, below EPA’s legal limit of 100 ppb. Its highest single sample was 5.1 ppb. In 2019, the latest year on file, it wasn’t found in any of its four samples.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 2.0 ppb
Highest yearly average, 2025 · Forms or is added in treatment
Averaged by year, the highest was 2.0 ppb, in 2025, below EPA’s legal limit of 60 ppb. That is the only year on file.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest 0.11 ppm
Highest result, 2025 · Forms or is added in treatment
The highest sample, in 2025, was 0.11 ppm, below EPA’s legal limit of 4.0 ppm.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.025 ppm, in 2016.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Nitrate, Legal limit 10 ppm; highest 0.095 ppm
Highest result, 2025 · Comes from the source
The highest sample, in 2025, was 0.095 ppm, below EPA’s legal limit of 10 ppm.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.16 ppm, in 2018.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- Lithium
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
What handles it
A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.
- NSF/ANSI 53
Claim: Arsenic (Pentavalent)<=50 ppb Reduction
For: Arsenic
Other claims that cover it: Arsenic (III) (50 ppb influent level)
- NSF/ANSI 58
Claims: Arsenic (Pentavalent)<=50 ppb Reduction, Uranium
For: Arsenic, Uranium
Other claims that cover it: Arsenic (Pentavalent)<=300 ppb Reduction; Arsenic (V) (300 ppb influent level)
At the tap, or for the whole house?
These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.
Filters with those claims on a certifier’s listing
Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money
Under-sink reverse osmosis
Five years: $549, household of 3, cartridges included
WQA listing: NSF/ANSI 58, checked Oct. 9, 2026
Certified for: Arsenic
Countertop reverse osmosis
Five years: $1,344, household of 3, cartridges included
Certified for: Arsenic
Brondell Capella RC250 Reverse Osmosis System
Under-sink reverse osmosis
Five years: $1,950, household of 3, cartridges included
Certified for: Arsenic
One more filter
Aquasana SmartFlow Reverse Osmosis (AQ-SFRO2)
Under-sink reverse osmosis
Five years: $2,917, household of 3, cartridges included
Certified for: Arsenic
Disinfectant
Hollister PWS reported disinfecting with chlorine, not chloramine, at all 4 of its sampling points, in its 2023 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride and nitrate results here are from the annual water quality reports Missouri writes for each utility, from 2025 on, with EPA’s national file for 2012 to 2019. Arsenic and uranium results here are Missouri’s yearly averages as CDC publishes them, from 2021 on, with EPA’s national file for 2012 to 2019. Chromium (total) comes from EPA’s file alone, which ends in 2019. Hollister PWS’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from Jan. 16 to July 17, 2023; the reports Missouri writes cover 2025; CDC’s yearly averages for Missouri cover 2021 to 2022; EPA’s compliance samples are from Feb. 19, 2013 to Feb. 26, 2019.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Hollister PWS’s latest lead sampling in EPA’s records, 2024 to 2026, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The 3 labs Missouri certifies closest to the area Hollister PWS serves, or a kit by mail
The 3 labs Missouri certifies closest to the area Hollister PWS serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
Missouri American Water Co.-Branson Metro Laboratory
Branson, MO · about 8 miles
Certified for bacteria
Taney County Health Department Laboratory
Branson, MO · about 8 miles
Certified for bacteria
Stone County Health Center
Reeds Spring, MO · about 13 miles
Certified for bacteria
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Missouri certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Missouri’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Nothing here is above an EPA limit or health benchmarkIn EPA’s, Missouri’s and CDC’s records for this utility. They don’t cover everything, which is why the next step matters.Every contaminant TapBuff tracks
- Get the utility’s own reportHollister PWS must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Missouri Department of Natural Resources, annual water quality reports, 2021 to 2026, read Oct. 22, 2026
- CDC Environmental Public Health Tracking Network, yearly averages Missouri supplied to CDC, 2020 to 2023, read Oct. 8, 2026. TapBuff’s comparisons with EPA’s limits are its own, not CDC’s or Missouri’s.
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Missouri DNR, certified microbiological and chemical laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID MO5010374. Rebuilt from EPA data on Oct. 25, 2026.