Skip to content
TapBuff
ZIP

Gasconade PWS

What EPA’s and CDC’s records show in this utility’s water: nitrate, arsenic and other regulated chemicals; lead and copper; and violations since 2016, with the certification that handles each result.

Serves
280 people
Connections
98
Water source
Groundwater
Based in
Gasconade, MO
County
Gasconade
Owner
Local government
The ZIP code it serves

65061

The short answer

1 result is above the health goal. The worst: Lead, above the health goal. No health-based violations on file since 2016.

What handles it

What was found

Lead and copper: EPA SDWIS monitoring periods ending 2016 to 2026.

Arsenic, haloacetic acids (HAA5), nitrate and total trihalomethanes (TTHM): Missouri’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023, with EPA’s 2012 to 2019 file for earlier years.

Chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from June 13, 2012 to July 16, 2018. Newer results are in the utility’s annual water quality report.

Above the health goal1

Lead

Comes from pipes, often your own

Above the health goal

5.0ppb

90th percentile, 2024 to 2026

In the latest period, 9 in 10 homes sampled were at or below 5.0 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

Below EPA’s limits2

Chromium (total)

Comes from the source

Below EPA’s limits

7.3ppb

Highest yearly average, 2012 to 2018

Averaged by year, the highest was 7.3 ppb, in 2018, below EPA’s legal limit of 100 ppb. That was also the latest year on file.

What handles it

Fluoride

Forms or is added in treatment

Below EPA’s limits

0.19ppm

Highest yearly average, 2012 to 2018

2018, one sample: 0.16 ppm

Averaged by year, the highest was 0.19 ppm, in 2015, below EPA’s legal limit of 4.0 ppm. In 2018, the latest year on file, its one sample was 0.16 ppm.

What handles it

4 compounds tested and not foundBelow the reporting level in every sample. Not found is not the same as zero.
  • Arsenic
  • Haloacetic acids (HAA5)
  • Nitrate
  • Total trihalomethanes (TTHM)

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box. Wording varies a little: NSF writes “Lead Reduction,” WQA just “Lead.”

At the tap, or for the whole house?

Lead and copper usually come from pipes and fixtures inside or near your home. A whole-house system sits where water enters, so it cannot catch what your own plumbing adds after it. For those, the filter that counts is the one at the tap. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

Compare five-year costs

The best water filters for lead, ranked

Violations since 2016

No health-based violations on file with EPA since 2016. There are 3 monitoring or reporting violations: a sample missed, late or not reported.

What this report can’t tell you

  • Everything else. Arsenic, haloacetic acids (HAA5), nitrate and total trihalomethanes (TTHM) results here are Missouri’s yearly averages as CDC publishes them, from 2020 on, with EPA’s national file for 2012 to 2019. Chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Gasconade PWS’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 didn’t sample this utility; CDC’s yearly averages for Missouri cover 2020 to 2023; EPA’s compliance samples are from June 13, 2012 to July 16, 2018.

Testing your own tap

Gasconade PWS’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Missouri certifies.

The 3 labs Missouri certifies closest to the area Gasconade PWS serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Missouri Department of Health & Senior Services-State Public Health Laboratory

    Jefferson City, MO · about 28 miles

    Certified for bacteria

    (573) 751-3334

  • Missouri American Water Co.-Jefferson City

    Jefferson City, MO · about 35 miles

    Certified for bacteria

    (573) 636-8616

  • Franklin County Lab

    Union, MO · about 36 miles

    Certified for bacteria

    (636) 583-9288

Missouri State Public Health Laboratory: Coliform and E. coli testing for private wells and other private drinking water sources, in kits from your local public health agency. A free state courier can carry the sample to the lab overnight. The handling fee is $10, by check or money order. Private Drinking Water Bacteriological Testing, Missouri Department of Health and Senior Services.

All 64 certified labs for Missouri

Sources

PWSID MO6010302. Rebuilt from EPA data on Oct. 18, 2026.

Also in Gasconade County

All Missouri utilities

What to do next