Excelsior Springs PWS
EPA’s, Missouri’s and CDC’s records have results for 37 contaminants in its water; 6 were found.
In the name, PWS means public water system.
Serves 11,084 people · Groundwater · Excelsior Spgs., MO
- Serves
- 11,084 people
- Connections
- 4,508
- Water source
- Groundwater
- Based in
- Excelsior Spgs., MO
- County
- Clay
- Owner
- Local government
The ZIP code it serves
The short answer
None of the results here is above a limit in force today. Lithium is above EPA’s health benchmark. 2 health-based violations since 2016, both resolved in EPA’s file.
This is what the records show, not medical advice. Worried about a health effect? Talk to a doctor or your local health department.
What was found
Where these results come from, and when
PFAS and lithium: EPA UCMR 5, samples taken from April 16 to Oct. 14, 2024.
Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride and nitrate: the annual water quality reports Missouri writes for each utility, 2023 to 2025, with EPA’s 2012 to 2019 file for earlier years.
Arsenic: Missouri’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023.
Chromium (total): EPA’s compliance monitoring file, samples taken from April 1, 2013 to March 8, 2017. Newer results are in the utility’s annual water quality report.
What the lines mean
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
- Health goal (MCLG):
- Not enforceable. The level with no expected risk, with a margin of safety.
- Health reference level:
- A screening level from EPA’s work on whether to regulate a contaminant, where there is no legal limit or health goal; not enforceable.
PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.
Above EPA’s health benchmark, 1 result
Lithium
Comes from the source
23.8 ppb
Highest sample, Oct. 14, 2024; found in 2 of 2
The highest sample was 23.8 ppb, about 2.4 times EPA’s health reference level of 10 ppb. That is a screening level, not an enforceable limit.
What handles it
No filter certification covers lithium yet, and EPA’s 2023 fact sheet says boiling doesn’t remove it. Because it was found, your utility has to report its lithium results in its annual water quality report, where newer ones will appear.
How to read your utility’s reportBelow EPA’s limits, 5 results
- Legal limit (MCL):
- Enforceable. The most a utility may deliver.
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 46 ppb
Highest yearly average, 2025 · Forms or is added in treatment
Averaged by year, the highest was 46 ppb, in 2025, below EPA’s legal limit of 80 ppb. Its highest single sample was 64 ppb. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 61.8 ppb, in 2016, and EPA recorded a violation in 2016.
What handles it
- NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
- NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
Haloacetic acids (HAA5), Legal limit 60 ppb; highest yearly average 20.3 ppb
Highest yearly average, 2025 · Forms or is added in treatment
Averaged by year, the highest was 20.3 ppb, in 2025, below EPA’s legal limit of 60 ppb. Its highest single sample was 31.3 ppb. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 29.9 ppb, in 2014.
What handles it
No certification claim covers this compound yet.
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.17 ppm
Highest yearly average, 2023 · Forms or is added in treatment
Averaged by year, the highest was 0.17 ppm, in 2023, below EPA’s legal limit of 4.0 ppm. That is the only year on file.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest yearly average of 0.16 ppm, in 2017.
What handles it
- NSF/ANSI 58 look for “Fluoride Reduction”
- NSF/ANSI 53 look for “Fluoride”
Chromium (total), Legal limit 100 ppb; highest yearly average 4.2 ppb
Highest yearly average, 2013 to 2017 · Comes from the source
Averaged by year, the highest was 4.2 ppb, in 2017, below EPA’s legal limit of 100 ppb. That was also the latest year on file.
What handles it
- NSF/ANSI 58 look for “Chromium (Hexavalent) Reduction”
- NSF/ANSI 53 look for “Chromium Reduction”
Nitrate, Legal limit 10 ppm; highest 0.054 ppm
Highest result, 2025 · 2025 average: 0.054 ppm · Comes from the source
The highest sample, in 2025, was 0.054 ppm, below EPA’s legal limit of 10 ppm. That is the only year on file, and it averaged below the limit.
Earlier, 2012 to 2019
From 2012 to 2019, EPA’s file shows a highest sample of 0.059 ppm, in 2015.
What handles it
- NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
- NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
31 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.
From routine monitoring
- Arsenic
- Lead
PFAS and lithium, from EPA’s UCMR 5 sampling
- 11Cl-PF3OUdS
- 4:2 FTS
- 6:2 FTS
- 8:2 FTS
- 9Cl-PF3ONS
- ADONA
- HFPO-DA (GenX)
- NEtFOSAA
- NFDHA
- NMeFOSAA
- PFBA
- PFBS
- PFDA
- PFDoA
- PFEESA
- PFHpA
- PFHpS
- PFHxA
- PFHxS
- PFMBA
- PFMPA
- PFNA
- PFOA
- PFOS
- PFPeA
- PFPeS
- PFTA
- PFTrDA
- PFUnA
Violations since 2016
2 health-based violations since 2016, all for TTHM. The latest began July 1, 2016.
- Resolved:
- EPA’s file records a resolving action. The utility came back into compliance, the rule no longer applied, or no further action was needed.
- No fix on record:
- It records none. EPA’s own word for these is archived, addressed or unaddressed, shown beside each (EPA’s definitions, updated Oct. 9, 2026).
EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.
Got a notice about one? What it means and what to do| Contaminant or rule | What happened | Period, and what was measured | Status |
|---|---|---|---|
| TTHM | The running average was above the legal limit.EPA: Maximum Contaminant Level Violation, Average | July 1, 2016 to Sept. 30, 2016, 85 ppb | Resolved |
| April 1, 2016 to June 30, 2016, 85 ppb | Resolved |
Health-based violations only. 3 monitoring or reporting violations not shown.
Disinfectant
Excelsior Springs PWS reported disinfecting with chlorine, not chloramine, at its one sampling point, in its 2024 sampling for EPA.
What that means
Chlorine leaves water that sits out for a few days, CDC says. A filter certified for it carries a chlorine claim under NSF/ANSI 42; a shower filter, a free chlorine claim under NSF/ANSI 177. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.
What this report can’t tell you
Everything else. Total trihalomethanes (TTHM), haloacetic acids (HAA5), fluoride and nitrate results here are from the annual water quality reports Missouri writes for each utility, from 2023 on, with EPA’s national file for 2012 to 2019. Arsenic results here are Missouri’s yearly averages as CDC publishes them, from 2020 on. Chromium (total) comes from EPA’s file alone, which ends in 2019. Excelsior Springs PWS’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.
Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.
What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.
Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from April 16 to Oct. 14, 2024; the reports Missouri writes cover 2023 to 2025; CDC’s yearly averages for Missouri cover 2020 to 2023; EPA’s compliance samples are from April 1, 2013 to March 8, 2017.
Testing your own tap
What to test for at your tap
- Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Excelsior Springs PWS’s latest lead sampling in EPA’s records, 2021 to 2023, had a 90th percentile of 0 ppb across the homes it sampled. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
- What Excelsior Springs PWS’s results flag: lithium. It is in the water the utility sends out, so a test of your tap mostly confirms it. Include it if you want a number for your own home.
The 3 labs Missouri certifies closest to the area Excelsior Springs PWS serves, or a kit by mail
The 3 labs Missouri certifies closest to the area Excelsior Springs PWS serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.
City of Independence Water Department
Sugar Creek, MO · about 12 miles
Certified for bacteria
Tri-County Water Authority
Independence, MO · about 12 miles
Certified for bacteria
Kansas City Water Services Laboratory
Kansas City, MO · about 22 miles
Certified for bacteria, nitrate, lead and copper, metals, minerals and other inorganics, organic chemicals, disinfection byproducts
Or test by mail
Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Missouri certifies it for the test you want.
Tap Score
- Lead and Copper Water Test, with a pH test strip: $55
- Essential City Water Test, 25 metals, 4 minerals, nitrate, fluoride, hardness and pH: $189
Return shipping included.
Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Missouri’s list.
Prices from Tap Score’s own store on Oct. 22, 2026.
What to do now
- Read up on lithiumWhat it does to health, where it comes from, and the certification claim that addresses it.About lithium
- Get the utility’s own reportExcelsior Springs PWS must send you a water quality report every year. It covers contaminants this page does not show, and has newer results than EPA’s national file for the ones here that come from it.How to read it
- Test your own tap for leadIts latest lead sampling found none at the 90th percentile, but your own service line, solder and fixtures decide the lead at your faucet.Lead in your water: what to do
Sources
- EPA UCMR 5 occurrence data, file of Oct. 15, 2026
- EPA SDWA bulk download (SDWIS federal data), 2026 Q3
- Missouri Department of Natural Resources, annual water quality reports, 2021 to 2026, read Oct. 22, 2026
- CDC Environmental Public Health Tracking Network, yearly averages Missouri supplied to CDC, 2020 to 2023, read Oct. 8, 2026. TapBuff’s comparisons with EPA’s limits are its own, not CDC’s or Missouri’s.
- EPA Six-Year Review 4 compliance monitoring data, 2012 to 2019, file of Feb. 5, 2024
- Disinfectant: EPA UCMR 5 occurrence data, additional data elements, file of Oct. 15, 2026
- Certified labs: Missouri DNR, certified microbiological and chemical laboratories, read Oct. 10, 2026; distances from the Census 2020 ZIP code tabulation area gazetteer
- Limits and goals: each contaminant’s page, with its EPA source.
- How this page is built: methodology.
PWSID MO1010261. Rebuilt from EPA data on Oct. 25, 2026.