Skip to content
TapBuff

Butler County PWSD 1

EPA’s, Missouri’s and CDC’s records have results for 38 contaminants in its water; 6 were found.

In the name, PWSD means public water supply district.

Serves 12,000 people · Groundwater · Poplar Bluff, MO

Serves
12,000 people
Connections
4,821
Water source
Groundwater
Based in
Poplar Bluff, MO
County
Butler
Owner
Local government
The 6 ZIP codes it serves

63901, 63902, 63945, 63954, 63961, 63967

The short answer

None of the results here is above a limit in force today. That covers PFAS and lithium; nitrate, arsenic and other regulated chemicals; and lead and copper, not everything. No health-based violations on file since 2016.

Filters for lead and uranium, if you want them lower⁠

What was found

Where these results come from, and when

PFAS and lithium: EPA UCMR 5, samples taken from June 4 to Dec. 9, 2024.

Lead and copper: EPA SDWIS monitoring periods ending 2013 to 2024.

Nitrate and uranium: the annual water quality reports Missouri writes for each utility, 2021 to 2025, with EPA’s 2012 to 2019 file for earlier years.

Total trihalomethanes (TTHM), arsenic and haloacetic acids (HAA5): Missouri’s yearly averages per water system, as CDC’s Environmental Public Health Tracking Network publishes them, 2020 to 2023.

Chromium (total) and fluoride: EPA’s compliance monitoring file, samples taken from Sept. 27, 2012 to Sept. 24, 2018. Newer results are in the utility’s annual water quality report.

What the lines mean
Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Health goal (MCLG):
Not enforceable. The level with no expected risk, with a margin of safety.

PFAS: None of the six PFAS in EPA’s 2024 drinking water rule was found in this utility’s samples. None of the other 23 PFAS tested for was found either.

Below EPA’s limits, 6 results

Lead and uranium have a health goal of zero: the level with no known or expected risk. Any amount found is above it, but the goal isn’t a limit.

Legal limit (MCL):
Enforceable. The most a utility may deliver.
Action level:
Triggers action. If more than 10% of homes sampled are above it, the utility must act.
90th percentile:
How a lead or copper result is held against its action level: nine in ten of the homes sampled were at or below it.
Lead, Action level 15 ppb · health goal zero; 90th percentile 1.4 ppb

90th percentile, 2022 to 2024 · Comes from pipes, often your own

In the latest period, 9 in 10 homes sampled were at or below 1.4 ppb, below EPA’s action level of 15 ppb. The action level drops to 10 ppb on Nov. 1, 2027. EPA’s health goal for lead is zero.

What handles it

About lead
Nitrate, Legal limit 10 ppm; highest 0.68 ppm

Highest result, 2025 · Comes from the source

The highest sample, in 2025, was 0.68 ppm, below EPA’s legal limit of 10 ppm.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest sample of 0.75 ppm, in 2015.

What handles it

  • NSF/ANSI 58 look for “Nitrate/Nitrite Reduction”
  • NSF/ANSI 53 look for “Nitrate/Nitrite (30 ppm challenge)”
About nitrate
Chromium (total), Legal limit 100 ppb; highest yearly average 3.1 ppb

Highest yearly average, 2012 to 2018 · 2018: not found · Comes from the source

Averaged by year, the highest was 3.1 ppb, in 2012, below EPA’s legal limit of 100 ppb. Its highest single sample was 4.5 ppb. In 2018, the latest year on file, it wasn’t found in any of its four samples.

What handles it

About chromium (total)
Uranium, Legal limit 30 ppb · health goal zero; highest 0.73 ppb

Highest result, 2021 · Comes from the source

The highest sample, in 2021, was 0.73 ppb, below EPA’s legal limit of 30 ppb. Its health goal is zero, so any amount found is above it; the goal isn’t a limit.

Earlier, 2012 to 2019

From 2012 to 2019, EPA’s file shows a highest yearly average of 1.6 ppb, in 2016.

What handles it

About uranium
Fluoride, Legal limit 4.0 ppm; highest yearly average 0.063 ppm

Highest yearly average, 2012 to 2018 · 2018: not found · Forms or is added in treatment

Averaged by year, the highest was 0.063 ppm, in 2012, below EPA’s legal limit of 4.0 ppm. Its highest single sample was 0.13 ppm. In 2018, the latest year on file, it wasn’t found in any of its four samples.

What handles it

About fluoride
Total trihalomethanes (TTHM), Legal limit 80 ppb; highest yearly average 0.79 ppb

Highest yearly average, 2020 to 2023 · Forms or is added in treatment

Averaged by year, the highest was 0.79 ppb, in 2023, below EPA’s legal limit of 80 ppb. That was also the latest year on file.

What handles it

  • NSF/ANSI 53 look for “Trihalomethanes (TTHM) Reduction”
  • NSF/ANSI 58 look for “Trihalomethanes (TTHM) Reduction”
About total trihalomethanes (TTHM)
Missouri utilities above EPA’s PFAS limits⁠
32 compounds tested and not foundIncluding all six PFAS in EPA’s 2024 rule. Below the reporting level in every sample. Not found is not the same as zero.

From routine monitoring

  • Arsenic
  • Haloacetic acids (HAA5)

PFAS and lithium, from EPA’s UCMR 5 sampling

  • 11Cl-PF3OUdS
  • 4:2 FTS
  • 6:2 FTS
  • 8:2 FTS
  • 9Cl-PF3ONS
  • ADONA
  • HFPO-DA (GenX)
  • Lithium
  • NEtFOSAA
  • NFDHA
  • NMeFOSAA
  • PFBA
  • PFBS
  • PFDA
  • PFDoA
  • PFEESA
  • PFHpA
  • PFHpS
  • PFHxA
  • PFHxS
  • PFMBA
  • PFMPA
  • PFNA
  • PFOA
  • PFOS
  • PFPeA
  • PFPeS
  • PFTA
  • PFTrDA
  • PFUnA

Violations since 2016

No health-based violations on file with EPA since 2016. EPA’s file runs to 2026 Q3, so a notice your utility sent since then may not be here yet.

Skip past the filters

What handles it

A certification covers specific claims, not a whole standard. Look for these claims on the certifier’s listing, not the box.

At the tap, or for the whole house?

These come with the water itself, so a whole-house system certified for the same claims treats every tap and shower. A filter at the tap treats drinking water for much less. How whole-house systems compare.

Filters with those claims on a certifier’s listing

Disclosure: TapBuff earns a commission if you buy through some links on this page. It does not change which standard or filter we name. As an Amazon Associate, TapBuff earns from qualifying purchases. How TapBuff makes money

2 more filters
Compare five-year costs

Every filter for these, those that cover both first⁠

The best water filters for lead, ranked⁠

Disinfectant

Butler County PWSD 1 reported adding chloramine before water enters its pipes, at all 5 of its sampling points, in its 2024 sampling for EPA.

What that means

Chloramine is chlorine combined with ammonia. It lasts longer in the pipes, and unlike chlorine, it doesn’t leave water that sits out. A filter’s chlorine claim doesn’t cover it: look for the separate chloramine claim under NSF/ANSI 42. No shower filter can carry one: NSF/ANSI 177, the shower filter standard, covers free chlorine only. Fish, turtles and frogs need it removed from their water. This is what the utility reported for that sampling. Its annual water quality report says what it uses now.

What this report can’t tell you

  • Everything else. Nitrate and uranium results here are from the annual water quality reports Missouri writes for each utility, from 2021 on, with EPA’s national file for 2012 to 2019. Total trihalomethanes (TTHM), arsenic and haloacetic acids (HAA5) results here are Missouri’s yearly averages as CDC publishes them, from 2020 on. Chromium (total) and fluoride come from EPA’s file alone, which ends in 2019. Butler County PWSD 1’s own annual report, which it must send you every year, has newer results for those and the contaminants this page does not show.

  • Your own plumbing. Lead results are the 90th percentile across homes the utility samples. Your home’s service line, solder and fixtures decide yours. A certified lab test is the only way to know.

  • What it means for your health. This page reports what the records show and EPA’s limits and goals; it is not medical advice. If you are worried about a health effect, talk to a doctor or your local health department.

  • Anything after the latest data. SDWIS data is from 2026 Q3; UCMR 5 samples are from June 4 to Dec. 9, 2024; the reports Missouri writes cover 2021 to 2025; CDC’s yearly averages for Missouri cover 2020 to 2023; EPA’s compliance samples are from Sept. 27, 2012 to Sept. 24, 2018.

Testing your own tap

Butler County PWSD 1’s results are for the water it sends out. What your own service line, solder and fixtures add shows up only in a test of your tap, by a lab Missouri certifies.

What to test for at your tap

  • Lead and copper. Both come mostly from a building’s own service line, solder and faucets, so a utility’s numbers can’t tell you yours. Butler County PWSD 1’s latest lead sampling in EPA’s records, 2022 to 2024, had a 90th percentile of 1.4 ppb: 9 in 10 of the homes it sampled were at or below that. The action level is 15 ppb, dropping to 10 ppb in November 2027, and EPA’s health goal for lead is zero. About lead.
The lab Missouri certifies closest to the area Butler County PWSD 1 serves, or a kit by mail

The lab Missouri certifies closest to the area Butler County PWSD 1 serves, in a straight line. Call first: certification is test by test, and not every lab takes samples from homeowners.

  • Environmental Analysis South

    Jackson, MO · about 67 miles

    Certified for bacteria

    (573) 204-8817

All 64 certified labs for Missouri⁠

Or test by mail

Tap Score sells lab tests as kits you fill at your tap and mail back. The sample goes to Tap Score’s lab, not one near you, so check that Missouri certifies it for the test you want.

  • Tap Score

    Return shipping included.

    Tap Score says each kit ships to “an accredited laboratory” but doesn’t name it, so TapBuff can’t check it against Missouri’s list.

Prices from Tap Score’s own store on Oct. 22, 2026.

What to do now

Sources

PWSID MO4024070. Rebuilt from EPA data on Oct. 25, 2026.